Introduction
This manual provides detailed instructions for the assembly, operation, maintenance, and care of your Dream On Me Brody 5-in-1 Convertible Crib and Changer. Please read all instructions carefully before assembly and retain this manual for future reference. Ensure all components are present and undamaged before beginning assembly.
Safety Information
WARNING: Failure to follow these warnings and the assembly instructions could result in serious injury or death.
- Always ensure all bolts and fasteners are securely tightened. Periodically check for loose hardware.
- Do not use this crib if any parts are missing, damaged, or broken. Contact Dream On Me for replacement parts. Do not substitute parts.
- The mattress support must be in the lowest position when a child is able to pull to a standing position.
- To prevent falls, do not leave a child unattended in the crib or on the changing table.
- Keep all small parts and plastic bags away from children.
- This product is designed to meet or exceed ASTM and CPSC safety standards and is GREENGUARD Gold Certified.
Included Components
The Dream On Me Brody 5-in-1 Convertible Crib and Changer package includes:
- 5-in-1 Brody Convertible Crib with Changer
- Assembly Tool
- Changing pad and safety strap for the changing table
Please verify that all components are present before starting assembly.
Setup and Assembly
Assembly of the Dream On Me Brody 5-in-1 Convertible Crib and Changer requires two adults. Follow the step-by-step instructions provided in the separate assembly guide included with your product. Ensure all connections are secure before use.
Figure 1: The Dream On Me Brody 5-in-1 Convertible Crib and Changer fully assembled in crib mode with the attached changing table.
Adjustable Mattress Height
The crib features 3 adjustable mattress height positions. To adjust the mattress height:
- Remove the mattress and mattress support.
- Carefully reposition the mattress support to the desired height level.
- Ensure all four corners of the mattress support are securely fastened to the crib frame.
- Replace the mattress.
Always use the lowest mattress position once your child can pull themselves to a standing position.
Operating and Conversion
The Brody crib is a 5-in-1 convertible system, designed to adapt as your child grows. It transitions from a crib to a toddler bed, a full-size daybed, and a full-size bed with or without a footboard. Conversion kits for the toddler and full-size beds are sold separately.
Crib Mode
In crib mode, ensure the mattress is at an appropriate height for your child's developmental stage. The attached changing table provides a convenient space for diaper changes and includes three drawers for storage.
Toddler Bed Conversion
To convert the crib to a toddler bed, remove the front rail and install the toddler guard rail (sold separately). Refer to the specific instructions included with the toddler bed conversion kit.
Figure 2: The Brody crib configured as a toddler bed, retaining the attached changing table.
Daybed Conversion
To convert the crib to a daybed, remove the front rail. No additional parts are typically required for daybed conversion.
Full-Size Bed Conversion
To convert the crib to a full-size bed, you will need a full-size bed conversion kit (sold separately). This kit typically includes side rails and support slats. Follow the instructions provided with the conversion kit for proper assembly.
Figure 3: The Brody crib converted into a full-size bed, with the changing table separated for independent use.
Changing Table Use
The attached changing table features three drawers for storage and a changing pad with a safety strap. Always use the safety strap when changing your baby and never leave your child unattended on the changing table.
Maintenance and Care
To maintain the quality and appearance of your Dream On Me Brody Crib and Changer:
- Clean surfaces with a damp cloth. Avoid abrasive cleaners or strong chemicals that may damage the finish.
- Periodically check all screws, bolts, and fasteners to ensure they are tight. Re-tighten as necessary.
- Avoid exposing the furniture to direct sunlight or extreme temperature changes, which can cause warping or cracking.
- For minor scratches, touch-up pens or furniture repair kits can be used, matching the finish color.
Troubleshooting
If you encounter any issues during assembly or use, please review the assembly instructions carefully. Ensure all parts are correctly oriented and securely fastened. If problems persist, or if you believe a part is defective or missing, please contact Dream On Me customer support for assistance.
Specifications
| Brand | Dream On Me |
| Model Number | 620-K |
| Material Type | Wood (New Zealand Pinewood) |
| Color | Black |
| Item Dimensions (L x W x H) | 69" x 33.2" x 39.1" |
| Item Weight | 94 pounds |
| Maximum Weight Recommendation | 50 pounds |
| Maximum Height Recommendation | 35 inches |
| Certifications | GREENGUARD Gold Certified, ASTM, CPSC, Baby Safety Alliance Verified |
Figure 4: Dimensional overview of the Brody Crib and Changer.
Warranty Information
The Dream On Me Brody 5-in-1 Convertible Crib and Changer is backed by a 1-year limited manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For specific details regarding warranty coverage and claims, please refer to the warranty documentation included with your product or visit the official Dream On Me website.
Customer Support
For further assistance, replacement parts, or any questions not covered in this manual, please contact Dream On Me customer support. You can find contact information on the Dream On Me official website or through your retailer.