Gloria ON10075

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Gloria Ona Block Pro Odor Neutralizer User Manual

Model: ON10075

Brand: Gloria

1. Product Overview

The Ona Block Pro is a compact, solid odor neutralizer designed for use in small, enclosed areas. It effectively eliminates unpleasant odors in various environments, including cars, boats, closets, lockers, bags, and trash bins.

Key Features

  • Designed for small, enclosed spaces and vents to control odors.
  • Compact 3" x 3" size allows placement in most locations.
  • Safe for use in homes or businesses, around people, pets, and plants.
  • Simple operation: remove the lid and place in the desired area.
Ona Block Pro 6 Ounce odor neutralizer in its original packaging.
Figure 1: The Ona Block Pro 6 Ounce comes in a white container with a blue label and a black screw-top lid, designed to neutralize odors naturally.

2. Safety Information

Please read and understand the following safety guidelines before using the Ona Block Pro:

  • Keep out of reach of children and pets: While generally safe, direct ingestion or prolonged contact should be avoided.
  • Do not ingest: This product is not for consumption. If ingested, seek medical attention immediately.
  • Avoid direct contact: In case of skin or eye contact, rinse thoroughly with water. If irritation persists, consult a physician.
  • Ventilation: Use in well-ventilated areas. Excessive concentration in confined spaces may cause discomfort for sensitive individuals.
  • Storage: Store in a cool, dry place away from direct sunlight and extreme temperatures.

3. Setup

Preparing your Ona Block Pro for use is a simple process:

  1. Unscrew the Lid: Carefully twist the black lid counter-clockwise to remove it from the container.
  2. Inspect the Block: Ensure the solid block inside is intact and free from damage.
Ona Block Pro with the black lid removed, revealing the solid odor neutralizer block inside.
Figure 2: To begin using the Ona Block Pro, simply unscrew and remove the black lid, exposing the solid block material.

4. Operating Instructions

Follow these steps to effectively use your Ona Block Pro:

  1. Placement: Place the open container in the desired area where odor neutralization is needed. For optimal results, position it near the source of the odor or in the airflow of a ventilation system.
  2. Adjusting Intensity: The intensity of odor neutralization can be adjusted by controlling the exposure of the block.
    • For maximum effect, leave the lid completely off.
    • For a more subtle effect, partially cover the block with its vented lid or place it in an area with less airflow.
  3. Monitoring: Observe the odor levels in the area. Adjust the block's exposure as necessary to achieve the desired level of odor control.
Ona Block Pro with the black vented lid placed on top, allowing for controlled odor release.
Figure 3: The black lid features a vented design, allowing for controlled release of the odor neutralizing agent. The lid can be partially or fully opened to adjust effectiveness.

5. Maintenance

To prolong the life and effectiveness of your Ona Block Pro:

  • Refresh the Surface: If the block's effectiveness diminishes over time, gently scrape the top layer of the solid material with a clean utensil. This exposes a fresh surface and renews its odor-neutralizing properties.
  • Conserve When Not in Use: If you need to pause odor neutralization, replace the lid tightly to minimize evaporation and extend the block's lifespan.
  • Replacement: Replace the Ona Block Pro when the solid material has significantly diminished or is no longer effective.
Close-up view of the textured surface of the Ona Block Pro solid odor neutralizer.
Figure 4: The solid block has a textured surface. Periodically scraping the top layer can refresh the block's effectiveness.

6. Troubleshooting

If you encounter issues with your Ona Block Pro, consider the following:

  • Odor Not Fully Neutralized:
    • Ensure the lid is fully removed for maximum exposure.
    • Check if the block is placed in an area with adequate airflow.
    • Scrape the surface of the block to refresh its active compounds.
    • Consider if the area is too large for a single block; multiple blocks may be required.
  • Scent Too Strong:
    • Partially cover the block with its vented lid.
    • Move the block to an area with less direct airflow.
  • Block Drying Out Quickly:
    • Ensure the lid is replaced tightly when the block is not actively in use.
    • Avoid placing the block in direct sunlight or near heat sources.

7. Specifications

FeatureDetail
Product Dimensions3 x 3 x 3 inches
Item Weight8 ounces (total package)
Net Weight6 ounces (odor neutralizer block)
ManufacturerHawthorne Hydroponics, LLC
Model NumberON10075
ASINB00518E9O4
ScentCedar
ColorNatural
Item FormBlock

8. Warranty and Support

For information regarding product warranty, returns, or technical support, please contact the manufacturer, Hawthorne Hydroponics, LLC, or your authorized retailer. Keep your purchase receipt as proof of purchase.

For further assistance, please refer to the contact information provided on the product packaging or the manufacturer's official website.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.