GEWA Trombone Stand TBS-10B (Model 762.500) Instruction Manual

Introduction

Welcome to the instruction manual for your new GEWA Trombone Stand TBS-10B. This stand is designed to provide stable and reliable support for your trombone. Please read this manual carefully before assembly and use to ensure proper operation and longevity of your product.

Product Overview

Key Features

• Foldable design for easy transport and storage.
• Durable synthetic cone for secure instrument placement.
• Adjustable height from 61 cm to 109 cm to accommodate various trombones and user preferences.
• Lightweight construction, weighing approximately 1.4 kg.

Components

The GEWA Trombone Stand TBS-10B consists of the following main components:

• Main Shaft: The central vertical pole.
• Height Adjustment Knob: Secures the shaft at the desired height.
• Synthetic Cone: The top part where the trombone bell rests.
• Tripod Base: Three foldable legs for stability.
• Leg Locking Mechanism: Secures the legs in open or closed position.

Setup Instructions

1. Unpack the stand from its packaging.
2. Locate the tripod base. Gently pull the legs outwards until they are fully extended and locked into position. Ensure all three legs are spread evenly for maximum stability.
3. Extend the main shaft to your desired height. Loosen the height adjustment knob, slide the upper section of the shaft to the required height, and then firmly tighten the knob to secure it.
4. Ensure the synthetic cone is securely attached to the top of the main shaft.
5. Before placing your instrument, gently test the stand's stability on a flat surface.

Important: Always ensure the stand is stable and on a level surface before placing your trombone.

Operating Instructions

Placing the Trombone

1. Hold your trombone securely.
2. Carefully lower the bell of the trombone onto the synthetic cone of the stand.
3. Ensure the trombone is balanced and rests firmly on the cone without wobbling. The stand is designed to support the instrument by its bell.

Adjusting Height

1. To adjust the height, first remove the trombone from the stand.
2. Loosen the height adjustment knob on the main shaft.
3. Adjust the shaft to the desired height.
4. Firmly tighten the height adjustment knob to secure the shaft.
5. Re-place the trombone, ensuring stability.

Maintenance

Regular maintenance ensures the longevity and proper function of your GEWA Trombone Stand.

• Cleaning: Wipe down the stand with a soft, dry cloth to remove dust and dirt. For stubborn marks, a slightly damp cloth can be used, followed by immediate drying. Avoid abrasive cleaners or solvents.
• Inspection: Periodically check all screws, knobs, and joints for tightness. Tighten any loose components to maintain stability.
• Storage: When not in use, fold the stand for compact storage. Store in a dry environment away from extreme temperatures.

Troubleshooting

This section addresses common issues you might encounter with your trombone stand.

Stand is Unstable

• Ensure all three legs of the tripod base are fully extended and locked.
• Verify the stand is placed on a flat, level surface.
• Check that the height adjustment knob is securely tightened.
• Inspect legs and joints for any damage or bending.

Height Adjustment Slips

• Make sure the height adjustment knob is tightened firmly.
• Check for any debris or foreign objects within the adjustment mechanism that might prevent proper locking.

Trombone Does Not Sit Securely

• Ensure the trombone bell is fully seated on the synthetic cone.
• Verify the stand's height is appropriate for your trombone, allowing it to rest naturally without excessive tilt.

Specifications

Warranty and Support

For information regarding warranty coverage, product support, or spare parts, please refer to the documentation provided at the point of purchase or contact your local GEWA dealer. Keep your proof of purchase for warranty claims.