1. Important Safety Instructions
Please read all instructions carefully before using the appliance and retain them for future reference. Incorrect use can lead to injury or damage.
- Electrical Safety: Ensure the voltage indicated on the appliance corresponds to your mains voltage before connecting. Do not immerse the motor unit, cord, or plug in water or any other liquid.
- Blade Safety: The grinding blades are sharp. Exercise extreme caution when handling the blades, especially during cleaning. Always unplug the appliance before cleaning or attempting to remove contents.
- Supervision: This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
- Usage Environment: Use the appliance on a stable, dry, and level surface. Do not use outdoors.
- Overheating Protection: Do not operate the grinder continuously for more than 30 seconds. Allow a short break between grinding cycles to prevent overheating.
- Maintenance: Do not attempt to repair the appliance yourself. Contact qualified service personnel for any repairs.
2. Product Overview
The Taurus Aromatic Electric Coffee Grinder is designed for efficient and fine grinding of coffee beans, spices, and nuts. Its compact design and stainless steel components ensure durability and ease of use.
Figure 2.1: Front view of the Taurus Aromatic Electric Coffee Grinder.
Figure 2.2: Key features including 150W power, stainless steel body, and the operation button.
Components:
- Motor Unit (Base)
- Grinding Chamber with Stainless Steel Blades
- Transparent Lid with Viewing Window
- Operation Button
- Power Cord with Storage
3. Setup
- Unpack: Carefully remove the coffee grinder and all its components from the packaging. Retain the packaging for future storage or transport.
- Initial Cleaning: Before first use, wipe the exterior of the motor unit with a damp cloth. Wash the grinding chamber and lid with warm, soapy water, rinse thoroughly, and dry completely. Ensure no water enters the motor unit.
- Placement: Place the grinder on a stable, dry, and level surface, away from heat sources and water.
4. Operating Instructions
4.1 Grinding Coffee Beans
- Prepare Beans: Ensure the grinding chamber is clean and dry.
- Fill Chamber: Add up to 50 grams of whole coffee beans into the grinding chamber. Do not overfill.
Figure 4.1: Filling the grinding chamber with coffee beans. Maximum capacity is 50g.
- Secure Lid: Place the transparent lid securely onto the grinding chamber. The grinder will not operate unless the lid is properly closed.
Figure 4.2: The transparent lid features a viewing window to monitor grinding progress.
- Plug In: Connect the power cord to a suitable electrical outlet.
- Grind: Press and hold the operation button to start grinding. Release the button to stop.
Figure 4.3: The durable stainless steel blades ensure efficient grinding.
- For a coarse grind, press for a few seconds.
- For a medium grind, press for 10-15 seconds.
- For a fine grind, press for 20-30 seconds.
Monitor the fineness through the transparent lid. Do not operate for more than 30 seconds continuously.
4.2 Grinding Spices and Nuts
The Taurus Aromatic grinder is also suitable for grinding various dry spices and nuts. Follow the same operating steps as for coffee beans, adjusting grinding time for desired consistency.
Figure 4.4: The grinder can be used for nuts, such as almonds or walnuts.
Figure 4.5: Grinding whole peppercorns for fresh seasoning.
Figure 4.6: Ideal for grinding various dry herbs and spices.
5. Maintenance and Cleaning
Regular cleaning ensures optimal performance and extends the life of your grinder.
- Always Unplug: Before cleaning, always ensure the appliance is unplugged from the power outlet.
- Clean Grinding Chamber: Use a small brush (not included) to remove any residual coffee grounds, spices, or nut particles from the grinding chamber and around the blades. Be extremely careful around the sharp blades.
- Wash Lid: The transparent lid can be washed with warm, soapy water. Rinse thoroughly and dry completely before reattaching.
- Wipe Exterior: Wipe the exterior of the motor unit with a soft, damp cloth. Do not use abrasive cleaners or immerse the motor unit in water.
- Storage: Store the grinder in a dry place, away from direct sunlight and out of reach of children. The power cord can be neatly stored in the base of the unit.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Grinder does not start | 1. Not plugged in. 2. Lid not properly secured. 3. Overheating protection activated. | 1. Ensure the power cord is securely plugged into an outlet. 2. Make sure the lid is correctly placed and locked into position. 3. Unplug the grinder and let it cool down for at least 10-15 minutes before attempting to use it again. |
| Grinding is inconsistent | 1. Insufficient grinding time. 2. Overfilling the chamber. | 1. Increase grinding time slightly, observing through the lid. 2. Do not exceed the 50g capacity. Grind in smaller batches if necessary. |
| Burning smell during operation | 1. Overheating. 2. Motor strain from grinding hard items or overfilling. | 1. Immediately stop operation, unplug, and allow the unit to cool down completely. 2. Reduce the amount of material being ground and ensure it is suitable for the grinder. Avoid grinding excessively hard items. |
If the problem persists after attempting these solutions, please contact customer support.
7. Specifications
| Feature | Specification |
|---|---|
| Brand | Taurus |
| Model Number | 908503 |
| Power | 150 Watts |
| Voltage | 240 Volts |
| Material | Stainless Steel (Blades and Reservoir) |
| Capacity | 50 grams (coffee beans) |
| Dimensions (L x W x H) | 10.8 x 10.8 x 18.8 cm |
| Weight | 875 grams |
| Noise Level | 44 Decibels |
| Special Feature | Fine Grinding, Cable Storage, Non-slip Feet |
Figure 7.1: Bottom view showing cord storage, non-slip feet, and approximate dimensions.
8. Warranty and Support
This product is covered by a manufacturer's warranty against defects in materials and workmanship under normal use. The specific terms and duration of the warranty may vary by region. Please refer to the warranty card included with your purchase or visit the official Taurus website for detailed information.
Customer Support:
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Taurus customer service. Contact details can typically be found on the product packaging, the official Taurus website, or your purchase receipt.
When contacting support, please have your product model number (908503) and proof of purchase readily available.
