Arrowmax APM100-M9

Arrowmax APM100-M9 Speaker Microphone Instruction Manual

Model: APM100-M9

Introduction

The Arrowmax APM100-M9 Speaker Microphone is designed to provide clear audio transmission and reception for compatible Motorola two-way radios. This manual provides instructions for proper setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.

Product Features

  • Transmit and Receive Functionality: Enables clear two-way communication.
  • Comfortable Design: Engineered for extended wear.
  • 3.5mm Accessory Jack: Allows connection of an external earpiece for private listening.
  • Strain Relief Cable: Designed for enhanced durability and resistance to wear.
  • 360-Degree Metal Clip: Provides secure and flexible attachment to clothing or gear.

Compatibility

This speaker microphone is compatible with various Motorola two-way radio models, including but not limited to:

  • Motorola APX Series: APX6000, APX7000, APX8000
  • Motorola XPR Series: XPR6350, XPR6550, XPR7550, XPR7350e, XPR7550e, XPR7580e

Setup

  1. Connecting to Your Radio:

    Align the multi-pin connector of the speaker microphone with the accessory port on your Motorola radio. Gently push the connector into place until it clicks securely. Ensure a firm connection to prevent intermittent audio.

    Close-up view of the Arrowmax APM100-M9 speaker microphone's multi-pin connector, ready to be attached to a radio.

    Image: Multi-pin connector for radio attachment.

  2. Attaching the Metal Clip:

    The speaker microphone features a 360-degree rotating metal clip on its rear. Rotate the clip to your desired orientation and attach it securely to your uniform, belt, or other gear for convenient access.

    Illustration showing the 360-degree rotation capability of the durable metal clip on the back of the speaker microphone.

    Image: 360-degree rotating metal clip.

  3. Using an External Earpiece (Optional):

    For private listening, insert a compatible 3.5mm earpiece into the accessory jack located on the side of the speaker microphone. Ensure the earpiece is fully inserted for proper audio output.

    Side view of the Arrowmax APM100-M9 speaker microphone highlighting the 3.5mm audio jack for earpiece connection.

    Image: 3.5mm audio jack for earpiece.

Operating Instructions

  1. Receiving Audio:

    When the speaker microphone is connected, incoming radio transmissions will be heard through its integrated speaker. Adjust the radio's volume control to your preferred listening level.

    Front view of the Arrowmax APM100-M9 speaker microphone, showing the speaker grille and Push-To-Talk button.

    Image: Front view with speaker grille.

  2. Transmitting (Push-To-Talk):

    To transmit, press and hold the large Push-To-Talk (PTT) button located on the side of the microphone. Speak clearly into the microphone grille. Release the PTT button to return to receive mode.

  3. Using an Earpiece:

    If an earpiece is connected to the 3.5mm jack, audio will be routed to the earpiece instead of the speaker. The PTT button functions identically for transmission.

Maintenance

  • Cleaning: Use a soft, damp cloth to wipe the exterior of the microphone. Avoid using harsh chemicals or abrasive cleaners. Ensure no moisture enters the speaker grille or accessory jack.
  • Cable Care: Avoid sharp bends or excessive pulling on the cable to prevent internal damage. Store the cable neatly when not in use.
  • Clip Inspection: Periodically check the metal clip for any signs of damage or loosening. Ensure it remains securely attached to the microphone body.

Troubleshooting

ProblemPossible CauseSolution
No audio from speaker microphone.1. Loose connection to radio.
2. Radio volume too low.
3. Earpiece connected.
1. Re-seat the connector firmly.
2. Increase radio volume.
3. Disconnect earpiece if speaker audio is desired.
Cannot transmit.1. PTT button not fully pressed.
2. Radio not in transmit mode.
1. Ensure PTT button is fully depressed.
2. Check radio's operational status.
Intermittent audio or transmission.1. Loose connection.
2. Damaged cable.
1. Re-seat the connector.
2. Inspect cable for visible damage. If damaged, discontinue use and replace.

Specifications

SpecificationValue
Model NumberAK1R0025-120
Audio Sensitivity104 Decibels
Impedance50 Ohms
Power SourceCorded Electric
Signal-to-Noise Ratio104 dB
Number of Channels1
Item Weight0.353 ounces
Connectivity TechnologyAuxiliary
Connector Type3.5 mm Jack
Special FeatureClip
ColorBlack
Included ComponentsMicrophone
Polar PatternUnidirectional

Warranty and Support

For warranty information or technical support, please contact Arrowmax customer service through their official website or the retailer from whom the product was purchased. Please have your product model number (APM100-M9) and purchase details available when contacting support.

© 2023 Arrowmax. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.