Introduction
This manual provides essential instructions for the safe and proper operation of your Barbie Mix-It-Up DJ Turntable. Please read this manual thoroughly before use and retain it for future reference. This interactive toy allows users to create and mix music with various features.
Safety Information
- Age Recommendation: This product is suitable for children aged 3 years and up.
- Battery Safety: Use only the specified battery type (3 AA batteries). Do not mix old and new batteries, or different types of batteries. Ensure batteries are inserted with correct polarity. Remove exhausted batteries promptly. Do not recharge non-rechargeable batteries.
- Choking Hazard: This product contains small parts (e.g., microphone). Keep away from very young children who may put objects in their mouths.
- Supervision: Adult supervision is recommended during play.
- Cleaning: Clean the unit with a soft, dry cloth. Do not immerse in water.
Package Contents
- 1 x Barbie Mix-It-Up DJ Turntable
- 1 x Microphone (attached)
- 3 x AA Batteries (pre-installed or included separately)
Product Overview
Familiarize yourself with the main components of your DJ Turntable:
Image 1: Front view of the Barbie Mix-It-Up DJ Turntable, showing the two turntables, central control panel with buttons, and attached microphone.
- Power Button: Located on the central control panel.
- REC Button: For recording voice or sounds.
- Mode Selector: Switches between Free Play and Challenge modes.
- Song Select Buttons: To choose from 5 pre-programmed songs.
- Sound Effect Buttons: Activates 20 different sound effects.
- Turntables: Two interactive, light-up turntables for spinning and scratching.
- Tempo Slider: Adjusts the speed of the music (Slow to Fast).
- Loop Buttons: Activates various music loops.
- Microphone: Attached for singing along or recording.
- MP3 Input Jack: Located on the side or back for connecting an external MP3 player (MP3 player and cable not included).
Setup
1. Battery Installation
The unit requires 3 AA batteries. These are typically included and pre-installed. If replacement is needed:
- Locate the battery compartment on the underside of the unit.
- Using a Phillips head screwdriver, loosen the screw on the battery compartment cover and remove the cover.
- Insert 3 new AA batteries, ensuring correct polarity (+/-).
- Replace the battery compartment cover and tighten the screw.
2. Connecting an MP3 Player (Optional)
To play music from an external MP3 player:
- Locate the MP3 input jack on the DJ Turntable.
- Connect one end of a 3.5mm audio cable (not included) to your MP3 player's headphone jack.
- Connect the other end of the audio cable to the MP3 input jack on the DJ Turntable.
- Ensure your MP3 player is powered on and playing music. The audio will now play through the DJ Turntable's speakers.
Operation
1. Power On/Off
Press the Power Button to turn the unit ON. Press it again to turn the unit OFF.
2. Selecting a Song
Use the Song Select Buttons to choose from 5 built-in songs. Press a button to start playback of the corresponding song.
3. Adding Sound Effects
Press any of the Sound Effect Buttons to activate one of the 20 available sound effects. These can be layered over the music.
4. Using the Microphone
- Sing-Along: Speak or sing into the attached microphone while music is playing. Your voice will be amplified through the speakers.
- Recording: Press the REC Button to begin recording your voice. Press it again to stop recording. Your recorded voice can then be mixed with the music.
5. Turntable Interaction
The two turntables light up and produce unique sounds when spun or scratched. Interact with them to add DJ effects to your music mixes.
Image 2: Angled view of the Barbie Mix-It-Up DJ Turntable, highlighting the interactive turntables and central controls.
6. Adjusting Tempo
Slide the Tempo Slider to increase or decrease the speed of the currently playing music or loops.
7. Activating Loops
Press the Loop Buttons to activate different musical loops, which can be combined with songs and effects.
Image 3: A child interacting with the Barbie Mix-It-Up DJ Turntable, demonstrating typical use.
Maintenance
- Cleaning: Wipe the surface of the DJ Turntable with a soft, slightly damp cloth. Do not use abrasive cleaners or immerse the unit in water.
- Storage: When not in use, store the unit in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: If the unit will not be used for an extended period, remove the batteries to prevent leakage.
Troubleshooting
- No Power:
- Ensure batteries are correctly installed with proper polarity.
- Replace with fresh AA batteries.
- No Sound:
- Check if the unit is powered on.
- If using an MP3 player, ensure it is playing and the volume is up. Check the audio cable connection.
- Microphone Not Working:
- Ensure the unit is powered on.
- Speak directly into the microphone.
- Unit Turns On Unexpectedly:
- The unit may activate if buttons are pressed while stored. Ensure it is stored in a way that prevents accidental button presses.
Specifications
| Model Number | BE-624 |
| Brand | Barbie |
| Manufacturer | KIDdesigns, Inc |
| Power Source | 3 x AA Batteries (included) |
| Material | Plastic |
| Color | Pink and White |
| Product Dimensions (L x W x H) | 30.5 x 10.2 x 20.3 cm |
| Item Weight | 748.43 g |
| Recommended Age | 3 years and up |
| Language | English |
| UPC | 092298911502 |
Warranty Information
This product is covered by a limited warranty against defects in materials and workmanship. Please refer to the packaging or contact the manufacturer for specific warranty terms and conditions. Keep your purchase receipt as proof of purchase.
Support
For further assistance, technical support, or inquiries regarding your Barbie Mix-It-Up DJ Turntable, please contact KIDdesigns, Inc. customer service. Contact information can typically be found on the product packaging or their official website.
