Introduction
The Seagate GoFlex Satellite mobile wireless storage device allows you to carry your entire media library and wirelessly stream movies, photos, music, and documents to your iPad, tablet, or smartphone. With 500GB of storage capacity, it provides ample space for over 300 HD movies, ensuring you never run out of entertainment on the go. It features a fast USB 3.0/USB 2.0 connection for easy media transfer from your PC or Mac computer and offers up to 7 hours of continuous video streaming on a single charge.
This device is designed for convenience, enabling up to three different HD movies to be streamed simultaneously to three different devices. It supports streaming to almost any Wi-Fi enabled device with a web browser, including laptops, Android phones and tablets, iPhone, and iPod Touch. Up to 8 users can connect to the GoFlex Satellite to access various media types.
What's in the Box
Upon unboxing your Seagate GoFlex Satellite, you should find the following items:
- GoFlex Satellite mobile wireless storage device
- USB 3.0 USM adapter with detachable USB 3.0 cable
- Compact wall adapter with retractable pins
- Compact car charger
- USB to DC cable
- Quick start guide
- Warranty information
Image: The Seagate GoFlex Satellite device shown with its various accessories, including the USB 3.0 adapter, wall charger, car charger, and cables.
Setup
- Charge the Device: Before initial use, fully charge your GoFlex Satellite. Connect the compact wall adapter or car charger to the device using the USB to DC cable. The device can provide up to 7 hours of continuous play on a full charge.
- Transfer Media:
- Connect the GoFlex Satellite to your PC or Mac computer using the USB 3.0 USM adapter and detachable USB 3.0 cable.
- Install the downloadable Media Sync software (if prompted or available from Seagate's website) to facilitate media and document transfers.
- Drag and drop your desired movies, photos, music, and documents onto the GoFlex Satellite drive. The USB 3.0 connection ensures fast data transfers, and it is fully compatible with USB 2.0.
- Power On: Once charged and loaded with media, disconnect the device from your computer and charger. Press and hold the power button on the GoFlex Satellite to turn it on.
Image: A close-up view of the Seagate GoFlex Satellite, highlighting the power button on its side.
Operating Instructions
- Connect to Wi-Fi:
- On your Wi-Fi enabled device (iPad, tablet, smartphone, laptop), go to your Wi-Fi settings.
- Select the Wi-Fi network broadcasted by your GoFlex Satellite (e.g., "GoFlex Satellite_XXXX").
- Enter the network password if prompted (refer to the quick start guide for default password).
- Access Media:
- Using the Seagate GoFlex Media App: Download and install the free Seagate GoFlex Media app from your device's app store. Open the app to browse and stream your media.
- Using a Web Browser: Open a web browser on your device and navigate to the GoFlex Satellite's web interface (typically by entering a specific IP address or hostname, refer to the quick start guide). From there, you can browse and stream your content.
- Simultaneous Streaming: The GoFlex Satellite supports streaming to up to 3 devices simultaneously for HD content, and up to 8 devices for other media types.
- Internet Pass-through: The device can also connect to a nearby Wi-Fi hotspot, allowing your connected devices to access the internet while still streaming from the GoFlex Satellite.
Video: An official product video demonstrating the setup and use of the Seagate GoFlex Satellite for streaming media to multiple devices.
Specifications
| Digital Storage Capacity | 500 GB |
|---|---|
| Hard Disk Interface | USB 3.0 |
| Connectivity Technology | USB, Wi-Fi (802.11 b/g/n) |
| Brand | Seagate |
| Model Number | STBF500101 |
| Product Dimensions | 6.3 x 2.13 x 6.69 inches |
| Item Weight | 1.24 pounds |
| Battery Life (Video Streaming) | Up to 7 hours (continuous play) |
| Standby Time | Up to 25 hours |
| Compatible Devices | Tablets, Smartphones, Laptops (Wi-Fi enabled) |
Troubleshooting
- Device Not Powering On: Ensure the device is fully charged. Connect it to a power source using the provided wall adapter or car charger.
- Cannot Connect to Wi-Fi:
- Verify the GoFlex Satellite is powered on and its Wi-Fi indicator light is active.
- Check your device's Wi-Fi settings to ensure you are selecting the correct GoFlex Satellite network.
- Confirm the Wi-Fi password is entered correctly.
- Try restarting both the GoFlex Satellite and your client device.
- Streaming Issues (Buffering, Disconnections):
- Ensure your client device is within the wireless range (more than 30 feet).
- Reduce the number of simultaneously connected devices, especially when streaming high-definition content.
- Check the battery level of the GoFlex Satellite; low battery can affect performance.
- Ensure the media files are not corrupted or in an unsupported format.
- Files Not Appearing: Confirm that media files were successfully transferred to the GoFlex Satellite. Reconnect to your computer and verify the files are present on the drive.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the device. Avoid liquid cleaners or abrasive materials.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: For optimal battery life, avoid fully discharging the device frequently. If storing for extended periods, charge the battery to about 50% every few months.
- Firmware Updates: Periodically check the Seagate support website for firmware updates. Keeping your device's firmware up-to-date can improve performance and add new features.
Warranty and Support
For detailed warranty information, please refer to the warranty document included in your product packaging or visit the official Seagate support website. The quick start guide also contains contact information for customer support.
You can find additional resources, FAQs, and software downloads on the Seagate Support Website.
