Doorking 1503 Keypad User Manual

Product Overview

The DoorKing 1503 Keypad is an advanced access control device designed for both residential and commercial applications. It features a durable stainless steel faceplate and offers secure access through programmable entry codes. This manual provides comprehensive instructions for the installation, operation, and maintenance of your DoorKing 1503 Keypad.

Figure 1: Front view of the DoorKing 1503 Keypad, displaying the numeric buttons and an integrated key lock mechanism at the top for manual override.

Key Features

• Code Storage: Stores two 4-digit entry codes, two 5-digit entry codes, and two 4-digit hold codes.
• Programming: Codes can be programmed and activated via the keypad or through the DoorKing app.
• Memory Retention: EEPROM memory ensures programmed codes are retained even during power outages.
• Power Efficiency: Features a low power mode, making it suitable for solar installations.
• Construction: Durable stainless steel faceplate.
• Dimensions: Approximately 5 x 5 x 4 inches (L x W x H).
• Weight: Approximately 3 pounds.

Setup and Installation

1. Unpacking and Inspection

Carefully remove all components from the packaging. Verify that all items listed in the packing list are present and undamaged. If any items are missing or damaged, contact your supplier immediately.

2. Mounting Location

Select a suitable mounting location. The keypad should be installed on a flat, stable surface at a convenient height for users. Ensure the location is protected from direct harsh weather conditions if possible, although the unit is designed for outdoor use.

3. Wiring Connections

Warning: Disconnect all power to the access control system before making any wiring connections. Improper wiring can damage the unit or cause electrical shock.

1. Connect the power supply wires to the designated terminals on the keypad. Refer to the wiring diagram provided with your specific access control system.
2. Connect the output wires from the keypad to the control board of your gate operator or door strike.
3. Ensure all connections are secure and insulated to prevent short circuits.

4. Securing the Keypad

Use the provided mounting hardware to securely attach the keypad to the chosen surface. Do not overtighten screws, as this may damage the housing.

Operating Instructions

1. Initial Power-Up

Once all wiring is complete and secure, restore power to the access control system. The keypad should illuminate or provide an audible confirmation of power.

2. Programming Entry Codes (Keypad Method)

To program a new entry code:

1. Enter the Master Programming Code (refer to your system's main control board manual for the default or current master code).
2. Press the * key.
3. Enter the desired new entry code (4 or 5 digits).
4. Press the # key to confirm.
5. The keypad will provide an audible beep or visual flash to confirm successful programming.

Note: The DoorKing 1503 supports two 4-digit codes, two 5-digit codes, and two 4-digit hold codes. Consult the DoorKing app for advanced programming options.

3. Using Entry Codes

To gain access, simply enter your valid entry code on the keypad. The system will activate the gate or door strike upon successful code entry.

4. Using Hold Codes

Hold codes are typically used to keep a gate or door open for an extended period. Enter the hold code, and the system will maintain the open state until the code is re-entered or a timer expires (if configured).

Maintenance

The DoorKing 1503 Keypad is designed for minimal maintenance. However, regular checks can ensure optimal performance and longevity.

• Cleaning: Periodically wipe the keypad surface with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish or keypad buttons.
• Connection Check: Annually inspect all wiring connections for corrosion or looseness. Ensure all connections are secure.
• Functionality Test: Regularly test all programmed entry codes and hold codes to ensure they are functioning correctly.
• Firmware Updates: Check the DoorKing website or app for any available firmware updates for your model to ensure you have the latest features and security enhancements.

Troubleshooting

Specifications

Warranty Information

DoorKing products are manufactured to the highest quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official DoorKing website. Typically, DoorKing offers a limited warranty covering defects in materials and workmanship from the date of purchase.

Note: The warranty may be voided by improper installation, unauthorized repairs, or damage caused by misuse or neglect.

Support and Contact

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact DoorKing customer support:

• Website: Visit the official DoorKing website for FAQs, updated manuals, and support resources.
• Phone: Refer to the contact information provided on the DoorKing website or product packaging for direct phone support.
• App Support: Utilize the DoorKing app for certain support features and programming assistance.

When contacting support, please have your product model number (1503) and serial number (if applicable) ready.