Acctim Formia Radio Controlled Wall Clock

Introduction

Thank you for purchasing the Acctim Formia Radio Controlled Wall Clock. This manual provides essential information for the setup, operation, and maintenance of your new clock. Please read these instructions carefully before use and retain them for future reference.

This timepiece offers accurate radio-controlled timekeeping, a clear 12/24 hour dial, and energy-efficient movement for extended battery life.

Safety Information

• Do not expose the clock to extreme temperatures, direct sunlight, or high humidity.
• Avoid dropping the clock or subjecting it to strong impacts.
• Do not attempt to disassemble or repair the clock yourself. Refer to qualified service personnel.
• Dispose of used batteries responsibly according to local regulations.
• Keep batteries out of reach of children.

Package Contents

Please check that all items are present and in good condition:

• 1 x Acctim Formia Radio Controlled Wall Clock (Model 74417)
• 1 x Instruction Manual (this document)

Note: 1 AA battery is required for operation and is not included in the package.

Setup

1. Battery Installation

1. Locate the battery compartment on the back of the clock.
2. Insert one (1) AA battery, ensuring the polarity (+ and -) matches the diagram inside the compartment.
3. Close the battery compartment cover securely.

Image: Front view of the Acctim Formia Radio Controlled Wall Clock, showing the white dial with black numbers and hands, and the "radio controlled" symbol.

2. Initial Time Synchronization (Radio Control)

The clock is designed to automatically set itself to the correct time using a radio signal (UK & Ireland only). This process may take several minutes to a few hours, depending on your location and signal strength.

• Place the clock near a window or in an open area, away from large metal objects or electronic devices that might interfere with the signal.
• Once the battery is inserted, the clock hands will typically move to the 12 o'clock position and then begin searching for the radio signal.
• Allow the clock sufficient time to receive the signal and set itself. Do not manually adjust the hands during this process.

Image: Angled view of the Acctim Formia Radio Controlled Wall Clock, highlighting its silver frame and minimalist design.

3. Mounting the Clock

The clock is designed for wall mounting.

• Choose a suitable location on a wall, ensuring it is sturdy enough to support the clock's weight (approx. 1.28 lbs).
• Use an appropriate wall anchor and screw (not included) for secure mounting.
• Hang the clock using the keyhole slot on the back.

Image: Diagram showing the dimensions of the Acctim Formia Radio Controlled Wall Clock, indicating a width and height of 11.1 inches (28cm).

Operating Instructions

Automatic Time Adjustment

The Acctim Formia clock is radio-controlled, meaning it automatically receives time signals to ensure precise timekeeping. It will automatically adjust for Daylight Saving Time (BST/DST) in the UK and Ireland.

12/24 Hour Dial

The clock features both 12-hour (inner ring) and 24-hour (outer ring) markings on its dial for versatile time reading.

Maintenance

Cleaning

• Wipe the clock's surface with a soft, dry cloth.
• Do not use abrasive cleaners, solvents, or chemical sprays, as these may damage the finish.

Battery Replacement

When the clock hands stop moving or the time becomes inaccurate, it is time to replace the battery. Follow the battery installation steps in the "Setup" section.

Troubleshooting

Specifications

Warranty and Support

Warranty Information

Acctim products are manufactured to high standards and are guaranteed against defects in materials and workmanship. Please refer to the packaging or the official Acctim website for specific warranty terms and duration.

Customer Support

If you encounter any issues or have questions regarding your Acctim Formia Radio Controlled Wall Clock, please contact Acctim customer support. Contact details can typically be found on the product packaging or the official Acctim website.

For more information, visit: www.acctim.com