Introduction
This manual provides instructions for the proper installation, operation, and maintenance of your Whirlpool 63580 Fabric Softener Dispenser. This dispenser is designed to sit on top of the washing machine agitator and release fabric softener during the cleaning cycle. Please read these instructions carefully before use to ensure correct functionality and longevity of the product.
Safety Information
- Always ensure the washing machine is turned off and unplugged before attempting any installation or maintenance.
- Keep the dispenser out of reach of children and pets.
- Use only liquid fabric softener in the dispenser. Do not use powdered detergents or other chemicals.
- Verify compatibility with your washing machine model before installation. This accessory fits many washers manufactured since 1984 with a 24-inch or 27-inch cabinet width.
Setup and Installation
The Whirlpool 63580 Fabric Softener Dispenser is designed for easy, tool-free installation.
- Locate the agitator in the center of your washing machine tub.
- If your agitator has a removable cap, gently remove it.
- Place the Whirlpool 63580 Fabric Softener Dispenser directly on top of the agitator.
- Press down firmly until the dispenser is securely seated and feels stable. No tools or disassembly of the washing machine are required.
Image: Whirlpool 63580 Fabric Softener Dispenser, shown ready for installation on a washing machine agitator.
Operating Instructions
To use the fabric softener dispenser:
- After loading your laundry and adding detergent, open the lid of the fabric softener dispenser.
- Pour the desired amount of liquid fabric softener into the dispenser. Do not overfill.
- Close the dispenser lid securely.
- Start your washing machine cycle as usual. The dispenser will automatically release the fabric softener at the appropriate time during the rinse cycle.
Maintenance
Regular cleaning of the fabric softener dispenser is recommended to prevent residue buildup and ensure proper function.
- Cleaning: If the dispenser becomes messy or accumulates residue after several uses, remove it from the agitator. Rinse it thoroughly under warm water to remove any fabric softener buildup. You may use a small brush to clean hard-to-reach areas.
- Drying: Allow the dispenser to air dry completely before reattaching it to the agitator.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dispenser does not fit. | Incompatible washing machine model. | Verify your washing machine's compatibility. This dispenser is designed for washers with 24-inch or 27-inch cabinet widths. Ensure your machine is set up for a fabric softener dispenser. |
| Fabric softener residue around the drum. | Possible spin-spray or overfilling. | Wipe down the top area of the drum with a warm, wet cloth periodically. Ensure you are not overfilling the dispenser. Consider using an extra rinse cycle if available on your machine. |
| Softener not dispensing. | Dispenser clogged or improperly seated. | Remove and clean the dispenser thoroughly. Ensure it is securely placed on the agitator. |
Specifications
- Model Number: 63580
- Replaces Part Numbers: 2810, AH381197, EA381197, PS381197, W10795104, W10832235
- Product Dimensions: 6.5 x 4.5 x 4.5 inches
- Item Weight: 6.56 ounces
- Material Features: Durable and Resistant to Corrosion
- Compatibility: Universal accessory for many washers manufactured since 1984 with 24-inch or 27-inch cabinet width.
Warranty Information
For detailed warranty information regarding your Whirlpool 63580 Fabric Softener Dispenser, please refer to the product packaging or visit the official Whirlpool website. Warranty terms and conditions may vary.
Support
If you require further assistance or have questions about your Whirlpool 63580 Fabric Softener Dispenser, please contact Whirlpool Customer Service or visit the official Whirlpool website for support resources.
Whirlpool Official Store: Visit the Whirlpool Store