Ultmost CL-9946-EN Talking Tabletop 4-Alarm Alarm Clock

Introduction

The Ultmost CL-9946-EN is a versatile talking alarm clock designed for convenience and ease of use. It features a clear, human voice that announces the time and date at the press of a button. The large LCD display is equipped with a backlight for easy reading in various lighting conditions. This clock offers the flexibility of setting up to four independent alarms, making it suitable for multiple reminders or users.

Key Features

• Talking Function: Announces current time and date in English with a clear human voice.
• Large LCD Display: Provides clear visibility of time and settings.
• Backlight: Illuminates the display for easy reading in low-light environments.
• Four Independent Alarms: Allows setting up to four distinct alarm times.
• Tabletop Design: Compact and stable for placement on any flat surface.

Setup Guide

Follow these steps to set up your Ultmost CL-9946-EN Talking Alarm Clock for the first time.

1. Battery Installation: Locate the battery compartment on the back of the clock. Insert the required batteries (not included) ensuring correct polarity (+/-). Close the battery compartment cover securely.
2. Initial Power-On: Once batteries are inserted, the clock display should activate. If not, check battery orientation or replace with fresh batteries.
3. Set Time and Date: Refer to the "Operating Instructions" section for detailed steps on setting the current time and date.

Figure 1: Front view of the Ultmost CL-9946-EN Talking Alarm Clock.

Operating Instructions

Setting the Time and Date

• Time Setting: Press the MODE button repeatedly until the time setting mode is displayed. Use the ADJUST button to change hours, minutes, and 12/24-hour format. Press MODE again to confirm each setting.
• Date Setting: After setting the time, the date setting mode will typically follow. Use the ADJUST button to set the year, month, and day. Press MODE to confirm each setting.

Setting Alarms (AL1, AL2, AL3, AL4)

• Select Alarm: Press the ALARM SET button to cycle through AL1, AL2, AL3, AL4.
• Set Alarm Time: Once an alarm is selected, use the ADJUST button to set the desired hour and minute for that alarm.
• Activate/Deactivate Alarm: Press the ALARM ON/OFF button to toggle the selected alarm on or off. An alarm icon will appear on the display when active.

Using the Talking Feature and Backlight

• Announce Time/Date: Press the large TALK button (often located on top or front) to hear the current time and date announced.
• Activate Backlight: Press the LIGHT or SNOOZE/LIGHT button to illuminate the display for a few seconds.
• Snooze Function: When an alarm sounds, press the SNOOZE/LIGHT button to temporarily silence the alarm for a few minutes. The alarm will sound again after the snooze period.

Maintenance

• Cleaning: Wipe the clock surface with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or display.
• Battery Replacement: When the display dims or the talking function becomes unclear, it is time to replace the batteries. Follow the battery installation steps in the "Setup Guide" section. Always use the recommended battery type.
• Storage: If storing the clock for an extended period, remove the batteries to prevent leakage and potential damage to the device.

Troubleshooting

Product Specifications

Warranty and Support

For specific warranty information regarding your Ultmost CL-9946-EN Talking Tabletop 4-Alarm Alarm Clock, please refer to the documentation included with your purchase or contact Ultmost customer support directly. Warranty terms and conditions may vary by region and retailer.

For technical support or further assistance, please visit the official Ultmost website or contact their customer service department. Keep your purchase receipt as proof of purchase for any warranty claims.