Introduction
This manual provides essential information for the proper use and care of Rexel No.25 Small Staples. These staples are designed for light duty stapling tasks, offering reliable performance with compatible mini and desktop staplers.
Product Overview
Rexel No.25 Small Staples are crafted from high-quality steel, featuring a 4 mm leg length suitable for stapling up to 10 sheets of 80 gsm paper. Each box contains 5000 staples, ensuring a long-lasting supply for your office, home, or school needs. They are engineered for accurate and trouble-free stapling when used with appropriate stapler models.
Open box of Rexel No.25 Small Staples, showing individual staple strips.
Setup: Loading Staples
To ensure optimal performance, load Rexel No.25 Small Staples correctly into your compatible mini or desktop stapler.
- Open the Stapler: Locate and press the release button or pull the top cover of your stapler to open the staple channel.
- Insert Staples: Place a strip of Rexel No.25 staples into the channel with the pointed ends facing forward. Ensure the strip sits flat and securely within the channel.
- Close the Stapler: Gently push the top cover back down until it clicks into place, securing the staples.
Note: Always refer to your stapler's specific instruction manual for detailed loading procedures.
Several strips of Rexel No.25 Small Staples laid flat, ready for loading.
Operating Instructions: Stapling
Once your stapler is loaded with Rexel No.25 Small Staples, follow these steps for effective stapling:
- Align Documents: Gather the papers you wish to staple and align them neatly.
- Position Stapler: Place the stapler over the desired stapling point on your documents.
- Press Down: Apply firm, even pressure to the top of the stapler until the staple pierces the paper and clinches underneath.
- Check Staple: Verify that the staple has securely fastened all sheets together. If not, adjust the paper or stapler position and try again.
Maintenance and Storage
To maintain the quality and performance of your Rexel No.25 Small Staples:
- Storage: Store staples in their original packaging in a dry environment, away from excessive moisture or humidity, to prevent rust.
- Handling: Handle staple strips carefully to avoid bending or breaking them, which can lead to stapler jams.
- Compatibility: Always ensure you are using the correct staple size (No.25) for your stapler to prevent damage to the stapler and ensure proper stapling.
Troubleshooting
If you encounter issues while using Rexel No.25 Small Staples, consider the following:
- Staples Not Feeding:
- Check if the staple channel in your stapler is clear of debris.
- Ensure the staple strip is correctly seated and not bent.
- Verify that your stapler is compatible with No.25 staples.
- Staples Jamming:
- Carefully remove any jammed staples from the stapler.
- Ensure you are not attempting to staple more sheets than the stapler's capacity (these staples are rated for up to 10 sheets).
- Check for bent or damaged staple strips and replace them if necessary.
Specifications
| Feature | Detail |
|---|---|
| Staple Type | No.25 Small Staples |
| Leg Length | 4 mm |
| Stapling Capacity | Up to 10 sheets (80 gsm paper) |
| Material | High-quality Steel |
| Quantity per Box | 5000 staples |
| Compatible Crown Width | 7.2 mm |
| Color | Silver |
| Recommended Use | Light duty stapling tasks in office, home, or school |
Rexel No.25 Small Staples box held in hand, illustrating its compact size and dimensions.
Warranty Information
Rexel products are manufactured to high-quality standards. For specific warranty details, please refer to the information provided with your stapler or contact Rexel customer support directly.
Support Information
For further assistance or inquiries regarding Rexel No.25 Small Staples, please visit the official Rexel website or contact their customer service department. Contact information can typically be found on the product packaging or the manufacturer's website.