Pentair 601002

Download PDF
Contents

Pentair 601002 IntelliBrite 5G Color Underwater LED Pool Light Instruction Manual

Model: 601002 | Brand: Pentair

1. Introduction

This manual provides comprehensive instructions for the safe and efficient installation, operation, and maintenance of your Pentair 601002 IntelliBrite 5G Color Underwater LED Pool Light. Please read all instructions thoroughly before beginning installation or operation to ensure proper function and safety.

2. Important Safety Information

WARNING: Risk of Electric Shock. Submerge before lighting.

Always disconnect power at the circuit breaker before attempting any service or maintenance. Installation must be performed by a qualified electrician in accordance with all national and local electrical codes. Failure to follow these instructions can result in serious injury or death.

Ensure the light is fully submerged in water before turning it on to prevent overheating and damage.

3. Product Features

  • Superior Reflector Design: Directs more light towards the pool bottom for increased intensity and color effects, minimizing glare.
  • Adjustable Lens: The lens can be rotated 180 degrees to provide either a wide beam pattern or a narrow beam pattern, allowing for customized illumination.
  • IntelliBrite Technology: Utilizes the brightest and most energy-efficient LEDs available for underwater pool and spa lighting.
  • Fixed Color Modes: Offers 5 predetermined fixed colors to set the mood: blue, green, magenta, white, and red.
  • Compatibility: Backwards compatible with first-generation IntelliBrite lights.

4. Technical Specifications

SpecificationDetail
Product Dimensions11 x 11 x 9 inches
Item Weight15.17 pounds
ManufacturerPentair
Model Number601002
Voltage120 Volt
Cord Length100 Foot

5. Package Contents

Verify that all components are present and undamaged before proceeding with installation:

  • Pentair 601002 IntelliBrite 5G Color Underwater LED Pool Light with 100-foot cord
  • Installation Guide (this document)
  • Mounting hardware (if applicable, typically included with niche)

6. Installation

Installation of the Pentair IntelliBrite 5G LED Pool Light should be performed by a qualified professional. Ensure power is disconnected at the circuit breaker before starting.

  1. Prepare the Niche: Ensure the existing pool light niche is clean and free of debris.
  2. Route the Cord: Carefully feed the 100-foot electrical cord through the conduit to the junction box.
  3. Connect Wiring: Connect the light's wiring (hot, neutral, and ground) to the corresponding wires in the junction box according to local electrical codes.
  4. Secure the Light: Place the light fixture into the niche and secure it with the provided stainless steel screw. Do not overtighten.
  5. Submerge and Test: Ensure the light is fully submerged in water before restoring power and testing its functionality.
Pentair 601002 IntelliBrite 5G Color Underwater LED Pool Light

Figure 1: Front view of the Pentair 601002 IntelliBrite 5G Color Underwater LED Pool Light. The light features a circular chrome-plated face ring with a Greek key pattern, a clear ribbed lens, and visible LED components inside. A warning label is visible at the bottom of the lens.

Video 1: This video demonstrates the installation process of an LED inground pool light, showing how to connect the wiring and secure the light fixture. It highlights the steps involved in replacing an old light with a new LED unit.

7. Operating Instructions

The IntelliBrite 5G LED Pool Light offers various color modes and effects. You can cycle through these modes by toggling your pool light switch:

  • Fixed Colors: Blue, Green, Magenta, White, Red.
  • Color Shows: Various pre-programmed light shows that transition between colors.

To change the light mode, simply turn the pool light switch OFF and then ON again within a few seconds. Each toggle will advance to the next mode. Pause on your desired mode.

8. App Control and Smart Home Integration

For advanced control and smart home integration, you can connect your pool light to a compatible app (e.g., Smart Life) and voice assistants like Amazon Alexa or Google Assistant. This allows for scheduling, custom scenes, and voice commands.

  1. Download the App: Scan the QR code provided in the product packaging or search for "Smart Life" in your device's app store.
  2. Set Up the App: Create an account or log in.
  3. Add the Device: Follow the in-app instructions to add your pool light. Ensure your Wi-Fi is set to 2.4 GHz. The app will automatically search for the RGBW device.
  4. Link to Voice Assistant: Within the Smart Life app, navigate to "Me" > "Third-party Control" and select your preferred voice assistant (Alexa or Google Assistant). Follow the on-screen prompts to link your accounts.

Video 2: This video provides a step-by-step guide on how to set up app control for a pool light, including downloading the Smart Life app, adding the device, and linking it to Amazon Alexa and Google Assistant for voice control.

9. Maintenance

  • Regular Cleaning: Periodically clean the light lens to ensure maximum light output. Use a soft brush or cloth and mild cleaning solution.
  • Inspect Gasket: Annually inspect the light's gasket for any signs of wear or damage. Replace if necessary to maintain a watertight seal.
  • Winterization: Follow standard pool winterization procedures, ensuring the light remains submerged if the pool is not drained below the light level.

10. Troubleshooting

ProblemPossible CauseSolution
Light does not turn onNo power, tripped breaker, faulty wiring.Check circuit breaker. Verify electrical connections. Consult a qualified electrician.
Colors do not changeIncorrect toggling sequence, control system issue.Ensure quick OFF/ON toggles. Check external control system (if used).
Water inside light fixtureDamaged gasket or improper seal.Immediately disconnect power. Replace gasket and re-seal. Consult a professional.

11. Warranty and Support

This Pentair product is covered by a limited warranty. For specific warranty details, please refer to the warranty card included with your product or visit the official Pentair website. For technical support, replacement parts, or service, please contact Pentair Customer Service.

Pentair Customer Service: 1-800-831-7133 (as per product label)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.