Hayward SP1107 Skim Vac In-Ground Pool Skimmer Instruction Manual

1. Introduction

The Hayward SP1107 Skim Vac is a vacuum plate designed to facilitate efficient cleaning of in-ground pools. It connects directly to your pool's skimmer basket, allowing a vacuum hose to draw water and debris through the skimmer system. This method streamlines the vacuuming process by eliminating the need to repeatedly turn the pump on and off, and it utilizes the skimmer basket for debris collection instead of the pump strainer basket.

Image: The Hayward SP1107 Skim Vac plate, a white circular device with a central adapter for vacuum hose connection.

2. Key Features

• 1-1/2-inch Straight Adapter: Designed for standard vacuum hose connections.
• Skimmer Compatibility: Fits Hayward Dyna-Skim In-Ground skimmer models SP1082, SP1084, SP1085, and SP1075.
• Efficient Vacuuming: Enables vacuuming directly through the skimmer basket, bypassing the pump strainer basket.
• Compact Size: Measures 7-1/4 inches in diameter.

3. Setup and Installation

1. Turn Off Pool Pump: Ensure your pool pump is completely off before handling any skimmer components.
2. Locate Skimmer Basket: Identify the skimmer basket in your pool's skimmer opening.
3. Place Skim Vac Plate: Carefully place the Hayward SP1107 Skim Vac plate directly over the skimmer basket opening. Ensure it sits flat and covers the opening securely.
4. Connect Vacuum Hose: Attach your 1-1/2-inch vacuum hose to the straight adapter located on the center of the Skim Vac plate. Push firmly to ensure a tight, secure connection to prevent air leaks.
5. Verify Connection: Double-check that the Skim Vac plate is properly seated and the hose is firmly attached.

4. Operating Instructions

1. Start Pool Pump: Once the Skim Vac plate is securely installed and the vacuum hose is connected, turn on your pool pump.
2. Begin Vacuuming: Proceed with vacuuming your pool as usual. The Skim Vac will draw water and debris through the skimmer basket, allowing for efficient cleaning.
3. Monitor Skimmer Basket: Regularly check the skimmer basket and empty it as needed to maintain optimal suction and prevent clogging.
4. Finish Vacuuming: After completing your pool vacuuming, turn off the pool pump.
5. Remove Skim Vac: Disconnect the vacuum hose from the Skim Vac plate and carefully remove the plate from the skimmer opening.

5. Maintenance

• Regular Inspection: Periodically inspect the Skim Vac plate for any signs of wear, cracks, or damage. Replace the plate if significant damage is observed.
• Cleaning: After each use, rinse the Skim Vac plate thoroughly with fresh water to remove any debris, dirt, or chemical residue.
• Storage: When not in use, store the Skim Vac plate in a clean, dry place away from direct sunlight and extreme temperatures to prolong its lifespan.
• Gasket Note: A rubber gasket is not included with the SP1107 Skim Vac. The design relies on the pump's suction to create a seal and hold the plate in place during operation.

6. Troubleshooting

• Poor Suction:
  • Check for air leaks in the vacuum hose connection to the Skim Vac plate. Ensure the hose is pushed on firmly.
  • Verify that the skimmer basket is clean and free of obstructions. A full or clogged basket will reduce suction.
  • Ensure the Skim Vac plate is seated correctly and evenly over the skimmer opening.
  • Confirm that your skimmer model is one of the compatible Hayward Dyna-Skim models (SP1082, 1084, 1085, 1075). An incorrect fit can lead to insufficient sealing and poor suction.
• Plate Flexing:
  • Some minor flexing of the plate may occur due to the material and pump suction. As long as a sufficient seal is maintained for effective vacuuming, this is generally not an issue. If flexing prevents a proper seal, re-check seating and hose connection.

7. Specifications

8. Warranty Information

The Hayward SP1107 Skim Vac In-Ground Pool Skimmer is covered by a limited warranty. For complete details regarding warranty terms, conditions, and duration, please refer to the official Hayward website or contact Hayward customer support directly. Keep your proof of purchase for warranty claims.

9. Customer Support

For further assistance, technical support, or any inquiries regarding your Hayward SP1107 Skim Vac, please visit the official Hayward website at www.hayward-pool.com or contact their customer service department. You may also find helpful resources and FAQs on their website.