AVENLI Jilong Double Flocked Coil Beam Air Bed

Introduction

This manual provides essential instructions for the safe and effective use of your AVENLI Jilong Double Flocked Coil Beam Air Bed. Please read all instructions carefully before setup and operation. This air bed is designed for both indoor and outdoor use, offering a comfortable sleeping surface with its strong vinyl coil beam construction and waterproof flocked top.

Important Safety Information

• Do not overinflate the air bed. Overinflation can cause damage and reduce product lifespan.
• Keep sharp objects away from the air bed to prevent punctures.
• Ensure the area where the air bed is placed is clear of debris and sharp objects.
• This product is not a toy. Do not allow children to jump on the air bed.
• Do not use the air bed near open flames or heat sources.
• Maximum weight capacity: 200 kg (approximately 440 lbs). Do not exceed this limit.

Image: The AVENLI Jilong Double Flocked Coil Beam Air Bed in a camping environment, demonstrating its intended use for comfortable outdoor sleeping. Two individuals are shown relaxing on the inflated air bed.

Setup Instructions

1. Unpacking

1. Remove the air bed from its packaging.
2. Unroll the air bed on a clean, flat surface, free from sharp objects or debris.
3. Allow the air bed to reach room temperature if it has been stored in cold conditions, as cold vinyl can be stiff and prone to damage.

2. Inflation

1. Locate the heavy-duty safety valve on the side of the air bed.
2. Open the valve cap.
3. Insert the nozzle of an air pump (not included) into the valve opening.
4. Inflate the air bed until it is firm to the touch. Do not overinflate. The air bed should be firm but still have some give.
5. Once inflated, quickly remove the pump and securely close the valve cap to prevent air leakage.

Image: A detailed view of the heavy-duty safety valve on the side of the air bed, used for both inflation and deflation.

3. Initial Stretch

It is normal for new vinyl to stretch during the first few uses. The air bed may feel softer after the first night. This is not a leak. Simply add more air to achieve your desired firmness. This stretching process typically stabilizes after a few uses.

Operating Instructions

Placement

Place the inflated air bed on a smooth, level surface. Avoid placing it on rough terrain, near sharp objects, or in direct sunlight for extended periods, as this can damage the material.

Usage

• The waterproof flocked top is designed to prevent sheets and sleeping bags from slipping, providing a soft, velvety feel.
• For optimal comfort, adjust the air pressure to your preference.
• The air bed is suitable for both indoor and outdoor use, making it ideal for camping or as an extra bed at home.

Weight Capacity

The AVENLI Jilong Double Flocked Coil Beam Air Bed is designed to support up to 200 kg (approximately 440 lbs). Do not exceed this weight limit to prevent damage to the air bed and ensure user safety.

Maintenance

Cleaning

To clean the air bed, wipe the flocked surface with a damp cloth and mild soap. For the vinyl sides and bottom, use a damp cloth. Do not use harsh chemicals or abrasive cleaners, as these can damage the material. Ensure the air bed is completely dry before storing.

Deflation and Storage

1. Open the heavy-duty safety valve.
2. Allow the air to escape naturally. You can gently press on the air bed or use an air pump with a deflate function to speed up the process.
3. Once fully deflated, fold the air bed neatly and compactly for easy storage.
4. Store the air bed in a cool, dry place, away from direct sunlight and extreme temperatures.

Repair Patch Usage

A repair patch is included with your air bed. In case of a small puncture:

1. Ensure the air bed is deflated and the area around the puncture is clean and dry.
2. Cut the repair patch to a size slightly larger than the puncture.
3. Peel off the backing from the patch and firmly press it over the puncture.
4. Apply pressure for several minutes to ensure a good seal.
5. Wait at least 30 minutes before reinflating the air bed.

Troubleshooting

Specifications

• Brand: AVENLI
• Model Name: JL020256N
• Construction Type: Strong Vinyl Coil Beam
• Top Material: Waterproof Flocked Vinyl
• Material: Vinyl
• Color: Blue
• Item Firmness Description: Plush
• Water Resistance Level: Waterproof
• Included Components: Repair Patch
• Target Audience: Adult
• Item Weight: 3 Kilograms (approx. 6.6 lbs)
• Maximum Weight Capacity: 200 kg (approx. 440 lbs)
• Inflated Dimensions (Twin Size, Model JL020256N): 74 inches (L) x 39 inches (W) x 5 inches (Th)
• Inflated Dimensions (Double Size, available variant): 74 inches (L) x 54 inches (W) x 5 inches (Th)
• Product Dimensions (Packaged): 10.75 inches (L) x 3.75 inches (W) x 14.5 inches (Th)

Image: A diagram illustrating the dimensions of an air bed, showing a length of 191 cm, a width of 137 cm, and a height of 22 cm when inflated. Note: Actual thickness for model JL020256N is 5 inches as per product description.

Warranty and Support

Repair Patch

Your AVENLI Jilong Double Flocked Coil Beam Air Bed includes a repair patch for minor punctures. Please refer to the "Repair Patch Usage" section under Maintenance for instructions.

Customer Support

For further assistance or inquiries regarding your product, please contact AVENLI customer support through the retailer where the product was purchased. Keep your purchase receipt for any warranty claims.