1. Introduction
This manual provides essential information for the safe and effective use of your PWR+ 3.6 Meter AC Power Cable, Model 3PR-UL. This cable is designed to provide reliable power connectivity for a wide range of electronic devices.
1.1 Product Overview
The PWR+ 3.6 Meter AC Power Cable features a 3-prong NEMA 5-15P plug on one end and an angled IEC-60320 C13 connector on the other. It is constructed with high-quality materials to ensure durability and safety.
Figure 1: The PWR+ 3.6 Meter AC Power Cable, coiled for storage.
1.2 Compatibility
This power cable is compatible with various devices requiring a 3-prong AC power connection, including but not limited to:
- Televisions: Dynex, LG, Panasonic Viera, Vizio, Sharp Aquos, Samsung, Toshiba, Mitsubishi, Magnavox (LCD, Plasma, DLP models).
- Monitors: Acer, AOC, BenQ, Dell, HP, Samsung, ViewSonic, Compaq, Hanns-G, Planar.
- Gaming Consoles: PlayStation 3, Xbox 360.
- Printers: Xerox, Oki Data, Brother, Lexmark, Samsung, HP, Ricoh, Canon, Konica Minolta.
- Other Equipment: ION Block Rocker, Block Party & Live Explorer Portable Speaker Systems, various fitness equipment (Bowflex, Horizon, Image, Landice, Nordic, Optoma, Proform, Precor, Reebok, Smooth, Sole, Stairmaster, Spirit, Star Trac, Weslo).
2. Setup and Connection
Follow these steps to properly connect your PWR+ AC Power Cable:
- Identify Connectors: Locate the NEMA 5-15P (standard 3-prong wall plug) and the angled IEC-60320 C13 connector on the cable. The C13 connector is designed to plug into your electronic device.
- Device Connection: Ensure your electronic device is turned off. Insert the angled IEC-60320 C13 connector firmly into the corresponding power inlet on your device. The angled design helps with clearance in tight spaces.
- Power Outlet Connection: Insert the NEMA 5-15P plug into a standard, grounded 3-prong AC wall outlet. Ensure the outlet provides the correct voltage (typically 120V AC in North America).
- Verify Connection: Confirm both ends of the cable are securely connected.
Figure 2: The NEMA 5-15P plug (left) and the angled IEC-60320 C13 connector (right).
3. Operating Instructions
Once the PWR+ AC Power Cable is securely connected to both your device and a power outlet, you can power on your electronic device as usual. The cable is designed for continuous power delivery within its specified voltage and wattage limits.
- Ensure the power outlet is active and supplying power.
- Avoid bending the cable sharply, especially near the connectors, to prevent damage.
- Do not overload the power cable or the electrical circuit.
4. Maintenance and Care
Proper maintenance ensures the longevity and safe operation of your power cable:
- Cleaning: Disconnect the cable from all power sources before cleaning. Wipe the cable and connectors with a dry, soft cloth. Do not use liquid cleaners or solvents.
- Storage: When not in use, coil the cable loosely. Avoid tight coiling or kinking, which can damage the internal wires. Store in a cool, dry place away from direct sunlight and extreme temperatures.
- Inspection: Periodically inspect the cable for any signs of damage, such as cuts, fraying, exposed wires, or bent/corroded prongs. If damage is found, discontinue use immediately and replace the cable.
- Stress Points: The cable features reinforced stress points to withstand wear and tear. However, avoid excessive pulling or bending at the connector junctions.
Figure 3: Illustration of reinforced stress points for enhanced durability.
5. Troubleshooting
If your device is not receiving power, consider the following troubleshooting steps:
- Check Connections: Ensure both the C13 connector and the NEMA 5-15P plug are fully and securely inserted into their respective ports.
- Verify Power Outlet: Test the wall outlet with another known working device or appliance to confirm it is supplying power. Check if a circuit breaker has tripped.
- Inspect Cable for Damage: Carefully examine the entire length of the power cable for any visible damage, such as cuts, kinks, or exposed wiring. If any damage is found, replace the cable immediately.
- Device Power: Confirm that the electronic device itself is functioning correctly by testing it with its original power cable (if available) or another compatible power source.
- Compatibility: Double-check that your device requires an IEC-60320 C13 power cable and that the voltage and wattage requirements are within the cable's specifications.
If the issue persists after performing these steps, contact customer support for further assistance.
6. Specifications
| Feature | Detail |
|---|---|
| Model Number | 3PR-UL |
| Cable Length | 3.6 Meters (approximately 12 feet) |
| Connectors | IEC-60320 C13 (angled) to NEMA 5-15P (3-prong) |
| Wire Gauge | SVT 3/C 18AWG (0.824mm²) |
| Voltage Rating | 300 Volts |
| Wattage Rating | 300 Watts |
| Temperature Rating | 105°C |
| Safety Certifications | UL Listed, RoHS Certified, VW-1, FT1 |
| Part Number | 3PR-6FT-LTYPE_JP (Note: This part number may indicate a 6ft variant, but the product title specifies 3.6 meters. Please refer to the product packaging for exact length.) |
Figure 4: Internal structure of the power cable, highlighting high-grade copper, wire insulation, aluminum foil shield, PVC cable jacket, and protective tinned copper braid.
Figure 5: The UL certification logo, indicating safety and quality testing.
7. Safety Information
The PWR+ AC Power Cable is designed with safety in mind and has undergone rigorous testing:
- UL Certified: This product has been tested, approved, and certified by UL (Underwriters Laboratories), a global safety science company. UL testing is authorized by OSHA (Occupational Safety and Health Administration), a U.S. federal agency.
- RoHS Compliant: The cable is RoHS certified, indicating compliance with directives on the restriction of hazardous substances.
- Voltage and Wattage: Do not exceed the specified voltage (300V) and wattage (300W) ratings to prevent overheating and potential damage.
- Indoor Use Only: This cable is intended for indoor use in dry conditions. Do not expose to moisture or extreme environmental conditions.
- Grounding: The 3-prong plug provides grounding for safety. Do not attempt to modify or bypass the grounding prong.
8. Warranty and Support
8.1 Warranty Information
Your PWR+ AC Power Cable comes with a 30-day money-back guarantee and a 24-month exchange warranty. This warranty covers defects in materials and workmanship under normal use.
8.2 Customer Support
For any questions, concerns, or assistance with your product, please contact PWR+ customer support. Our friendly support experts are available to help you.
Please refer to your purchase documentation or the PWR+ official website for specific contact details.
