Introduction
This manual provides detailed instructions for the safe and efficient use of your Jupio Nikon Battery Charger LNI0020. This versatile compact AC/DC charger is designed to charge specific Nikon lithium-ion batteries and offers a USB power output for additional device charging. Please read this manual thoroughly before operating the device.
Package Contents
- Jupio Nikon Battery Charger LNI0020
- Power cable (AC)
- 12VDC car charger cable
Setup
1. Connecting to Power
The Jupio LNI0020 charger supports both AC (wall outlet) and DC (car cigarette lighter) power sources.
- For AC Power: Connect the provided AC power cable to the charger's AC input port and then plug it into a standard 100-240VAC wall outlet.
- For DC Power (Car): Connect the provided 12VDC car charger cable to the charger's DC input port and then plug it into your vehicle's cigarette lighter socket.
2. Inserting the Battery
Ensure the battery is compatible with the charger. This charger is designed for specific Nikon lithium-ion batteries including EN-EL1, EN-EL2, EN-EL3, EN-EL3e, EN-EL5, EN-EL7, EN-EL8, EN-EL10, EN-EL11, EN-EL12, EN-EL14, EN-EL15, EN-EL19, EN-EL20, EN-EL21, EN-EL22, as well as D-Li78, NP-150, and NP-800.
- Identify the correct battery slot on the charger for your Nikon battery model.
- Carefully align the battery's contacts with the charger's contacts.
- Gently insert the battery into the slot until it is securely seated. Do not force the battery.
Image: The Jupio Nikon Battery Charger LNI0020 with a battery correctly inserted into one of its charging slots. This image illustrates the proper orientation for battery placement.
Operating Instructions
1. Charging Camera Batteries
Once the charger is connected to a power source and a compatible battery is inserted, the charging process will begin automatically. An indicator light on the charger will typically show the charging status (e.g., red for charging, green for fully charged). Refer to the specific indicator light behavior on your charger model.
- Ensure the battery is fully seated.
- Monitor the charging indicator.
- Remove the battery once fully charged to prevent overcharging, although the charger has built-in protection.
2. Using the USB Power Output
The charger features a USB power output port, allowing you to charge or power other devices such as MP3 players, phones, or digital cameras, even while charging camera batteries.
- Connect your device's USB charging cable to the USB output port on the Jupio charger.
- Ensure the charger is connected to a power source (AC or DC).
- Your device should begin charging.
Maintenance
- Cleaning: Disconnect the charger from all power sources before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
- Storage: Store the charger in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
- Handling: Avoid dropping the charger or subjecting it to strong impacts. Do not attempt to disassemble the charger.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Charger not powering on / Indicator light off | No power supply; loose connection; faulty power cable. | Check if the power cable is securely connected to both the charger and the power outlet/car socket. Try a different outlet or power source. Ensure the power source is active. |
| Battery not charging | Battery not properly inserted; incompatible battery; faulty battery; dirty battery contacts. | Re-insert the battery, ensuring proper alignment. Verify the battery model is listed as compatible. Clean battery and charger contacts with a dry cloth. Test with a different, known-good battery if available. |
| USB device not charging | USB cable issue; device not compatible with USB charging; charger not powered. | Ensure the charger is powered. Try a different USB cable. Confirm your USB device supports charging via a standard USB port. |
Specifications
- Model Number: LNI0020
- Input Voltage: 100-240VAC, 12VDC
- Compatible Batteries: Nikon EN-EL1/EL2/EL3/EL3e/EL5/EL7/EL8/EL10/EL11/EL12/EL14/EL15/EL19/EL20/EL21/EL22, D-Li78, NP-150/800
- Connector Type: USB (output)
- Item Weight: 90 Grams
- Manufacturer: International Supplies
Warranty Information
The Jupio Nikon Battery Charger LNI0020 comes with a 3-year no-nonsense warranty. This warranty covers manufacturing defects and ensures reliable operation under normal use. Please retain your proof of purchase for warranty claims.
Support
For further assistance, technical support, or warranty inquiries, please visit the official JUPIO website or contact your retailer. Always refer to the latest information available from the manufacturer for product updates and support resources.
Official JUPIO Store: JUPIO Store on Amazon
