1. Introduction
Thank you for choosing the Coaster Fine Furniture Cinder Windsor-Style Armless Dining Chairs. This set of four chairs is designed to enhance your dining space with a classic farmhouse aesthetic, featuring a natural brown seat and a white wooden frame. Crafted from Asian hardwood, these chairs offer durability and comfort for everyday use in your home kitchen or dining room.
The arched backrest and back support slats are designed to provide comfortable seating and encourage proper posture. Their versatile design allows them to blend seamlessly with various home furnishing styles, including rustic, coastal, or cottage-inspired decors.
2. Safety Information
- Always follow assembly instructions carefully.
- Do not use power tools for assembly unless specifically instructed, as this may overtighten fasteners and split wood.
- Ensure all bolts and screws are securely tightened before using the chairs. Periodically check and re-tighten fasteners as needed.
- Do not stand on the chairs.
- Do not exceed the maximum weight recommendation of 300 pounds per chair.
- Keep small parts away from children during assembly to prevent choking hazards.
- Use floor protectors or felt pads on chair legs to prevent scratching hard floor surfaces.
3. Package Contents
Your package includes four (4) Cinder Windsor-Style Armless Dining Chairs. Please verify that all components are present and undamaged before beginning assembly.
Image: A set of four Coaster Cinder Windsor-style dining chairs, featuring white frames and natural wood seats, arranged around a dining table. This image illustrates the complete product package.
4. Setup and Assembly Instructions
Assembly instructions are included with the product. Follow the provided manual for step-by-step guidance on how to assemble the chairs. The back and seat components are typically pre-assembled. The main assembly involves attaching the legs and ensuring all support rungs are correctly positioned and tightened.
Assembly Tips:
- Identify each leg: Note that each leg may have a slight angle. The downward angle typically goes to the rear of the seat, and the lower dowel hole should face inwards.
- Hand-tighten first: Initially hand-tighten all screws and bolts to ensure proper alignment before fully tightening.
- Avoid over-tightening: Do not use a power driver unless you are experienced and can control torque, as over-tightening can split the wood.
- Consider wood glue: For enhanced stability and longevity, especially for factory-assembled parts that may loosen over time, consider applying wood glue to dowel joints during assembly.
Image: A technical diagram illustrating the various dimensions of a single Coaster Cinder Windsor-style dining chair, including height, width, and depth measurements for the seat and backrest.
5. Operating Instructions (Usage)
These chairs are designed for dining and general seating purposes. They are suitable for indoor use in dining rooms, kitchens, or other living spaces. While the wooden seat provides a firm surface, you may consider adding seat cushions for extended comfort during long periods of sitting.
Image: A single Coaster Cinder Windsor-style dining chair, showcasing its white spindle back and natural wood seat, positioned next to a window.
6. Maintenance
To maintain the appearance and longevity of your chairs, follow these care instructions:
- Clean using a damp cloth.
- Do not use strong chemicals or abrasive cleaners, as these can damage the finish.
- Wipe up spills immediately to prevent staining.
- Avoid prolonged exposure to direct sunlight or extreme temperature changes, which can cause wood to fade or crack.
- Periodically check and tighten all hardware to ensure the chairs remain stable.
7. Troubleshooting
Wobbling Chairs:
If a chair wobbles after assembly, it may be due to uneven leg lengths or loose joints. Ensure all bolts and screws are tightened evenly. If wobbling persists, loosen all fasteners slightly, sit on the chair to settle the legs, and then re-tighten all fasteners while the chair is under weight. For persistent issues, check if any leg is shorter than others and consider adding felt pads to the shorter leg(s) to level the chair.
Loose Parts:
Over time, daily use can cause joints to loosen. Regularly inspect the chairs for any loose screws or dowels. Re-tighten any loose fasteners. If wooden dowel joints become loose, disassembling the affected part, applying wood glue, and reassembling can provide a more secure and lasting fix.
8. Specifications
| Brand | Coaster Fine Furniture |
| Model Name | Cinder |
| Item Model Number | 4129 |
| Color | White & Natural Brown |
| Product Dimensions | 19.5"D x 17.75"W x 36.5"H |
| Seat Height | 17.75 Inches |
| Seat Depth | 15.5 inches |
| Material | Asian Hardwood, LVL |
| Style | Farmhouse, Windsor-Style |
| Maximum Weight Recommendation | 300 Pounds |
| Unit Count | 4.0 Count |
| Item Weight | 50.7 pounds (for the set) |
9. Official Product Videos
Coaster Home Furnishings Introduction
Video: An introductory video from Coaster Home Furnishings, showcasing various furniture pieces and home settings, highlighting the brand's commitment to quality and style. Duration: 1 minute 26 seconds.
Coaster Home Furnishings Brand Statement
Video: A brand statement video from Coaster Home Furnishings, emphasizing their values and approach to furniture design and customer satisfaction. Duration: 37 seconds.
10. Warranty and Support
For specific warranty information regarding your Coaster Fine Furniture Cinder Dining Chairs, please refer to the documentation included with your purchase or contact Coaster Fine Furniture customer support directly. You can typically find contact details on the manufacturer's website or through your retailer.
Additional protection plans may be available for purchase separately. Please consult your retailer for details on extended protection options.
