Uline Comfort-Grip Knife User Manual

Introduction

This manual provides essential instructions for the safe and effective use, maintenance, and troubleshooting of your Uline Comfort-Grip Knife. Please read this manual thoroughly before operating the knife and retain it for future reference.

Safety Information

WARNING: Blades are extremely sharp. Handle with extreme care. Always retract the blade when not in use. Keep out of reach of children.

Always wear appropriate personal protective equipment, such as cut-resistant gloves and eye protection, when handling or replacing blades.

Components

The Uline Comfort-Grip Knife consists of the following main components:

Handle: Ergonomically designed for comfortable grip.
Blade Retraction Button: Used to extend and retract the blade.
Blade: Replaceable carbon steel utility blade.
Blade Release Mechanism: Allows for quick blade changes.

Uline Comfort-Grip Knife showing handle, blade, and retraction button — Figure 1: Overview of the Uline Comfort-Grip Knife. This image displays the blue handle with the orange ULINE logo, the silver blade housing, and the exposed black utility blade. The blade retraction button is visible on top of the handle.

Setup

Blade Installation (Initial Setup)

Your Uline Comfort-Grip Knife comes with one blade pre-installed or included separately. If the blade is not installed, follow these steps:

Locate the blade release mechanism, typically a button or lever near the front of the knife.
Press and hold the blade release mechanism.
Carefully insert a new utility blade into the blade slot until it clicks into place. Ensure the blade is oriented correctly with the sharp edge facing forward.
Release the blade release mechanism. Gently pull on the blade to ensure it is securely locked.

Note: Always ensure the blade is fully seated and locked before use to prevent accidental dislodgement.

Operating Instructions

Extending and Retracting the Blade

The Uline Comfort-Grip Knife features a retractable blade with three positions for versatility and safety.

To extend the blade, locate the textured thumb slide button on the top of the handle.
Push the thumb slide button forward until the blade extends to your desired cutting depth. The knife has three distinct blade positions.
To retract the blade, pull the thumb slide button backward until the blade is fully enclosed within the handle.

Important: Always retract the blade fully when the knife is not in active use or when storing it.

Cutting Techniques

For optimal performance and safety:

Always cut away from your body.
Use a cutting mat or a sacrificial surface underneath the material being cut.
Apply firm, even pressure. Do not force the blade.
For thicker materials, make multiple shallow passes rather than one deep cut.

Maintenance

Blade Replacement

Dull blades are dangerous and can lead to accidents. Replace the blade as soon as it shows signs of dullness or damage.

Ensure the blade is fully retracted.
Locate and press the blade release mechanism.
Carefully slide the old blade out. Dispose of used blades safely in a designated blade disposal container or wrapped securely to prevent injury.
Insert a new Uline replacement blade (available separately) into the slot until it locks into place.
Release the blade release mechanism and verify the new blade is secure.

Cleaning and Storage

Keep your knife clean and dry to ensure longevity and proper function.

Wipe the knife clean with a dry cloth after each use.
Do not immerse the knife in water or cleaning solutions.
Store the knife in a dry place with the blade fully retracted, away from moisture and extreme temperatures.

Troubleshooting

Problem	Possible Cause	Solution
Blade does not extend or retract smoothly.	Debris in the blade channel; mechanism obstruction.	Clean the blade channel of any debris. Ensure the blade is not bent or damaged.
Blade feels loose or wobbly.	Blade not fully seated; worn blade release mechanism.	Ensure the blade is correctly installed and locked. If the issue persists, the knife may need replacement.
Knife not cutting effectively.	Dull or damaged blade.	Replace the blade with a new, sharp Uline replacement blade.

Specifications

Model: B004SIPL18
Brand: ULINE
Handle Dimensions (L x H x D): 6 x 1.3 x 0.8 inches
Blade Dimensions (L x H): 2.4 x 0.74 inches
Blade Thickness: 0.6 mm
Handle Material: Zinc / Rubber
Blade Material: Carbon Steel
Handle Type: Manual-Retractable
Item Weight: 4.8 ounces
Date First Available: March 17, 2011

Warranty Information

ULINE products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty information provided at the time of purchase or visit the official ULINE website. Typically, products are covered against defects in materials and workmanship under normal use.

Customer Support

If you have any questions, require assistance, or need to order replacement parts (such as blades), please contact ULINE customer support:

Website: www.uline.com
Phone: Please refer to the ULINE website for regional contact numbers.

When contacting support, please have your product model number (B004SIPL18) and purchase details ready.

	ULINE H-7162 24" LED Light - Installation, Safety, and Maintenance Guide This guide provides essential information for the ULINE H-7162 24-inch LED Light, including safety warnings, mounting instructions, electrical specifications, and maintenance procedures. Ensure safe and proper operation by following these guidelines.
	ULINE H-8520 4-Drawer Tool Cart Assembly Instructions Comprehensive assembly guide for the ULINE H-8520 4-Drawer Tool Cart, detailing parts, tools, safety precautions, and step-by-step assembly instructions.
	ULINE DEGREASER Safety Data Sheet Comprehensive Safety Data Sheet (SDS) for ULINE DEGREASER, detailing hazard identification, composition, first-aid measures, handling, storage, exposure controls, physical and chemical properties, toxicological and ecological information, transport, and regulatory data.
	ULINE H-8041 Compact Auto Floor Scrubber User Manual & Troubleshooting Guide Comprehensive user manual for the ULINE H-8041 Compact Auto Floor Scrubber, covering safety, assembly, operation, daily maintenance, and troubleshooting for efficient floor cleaning.
	ULINE H-2307 Gym Wipes Dispenser: Installation and Usage Guide Detailed installation and user guide for the ULINE H-2307 Gym Wipes Dispenser. Learn how to mount, adjust settings, and load dry wipers or gym wipes. Includes parts list and tools required.
	ULINE H-7121, H-7122 Industrial Cord Reel - Installation and Maintenance Manual This manual provides detailed instructions for the installation, operation, and maintenance of the ULINE H-7121 and H-7122 Industrial Cord Reels. It includes safety precautions, dimensions, mounting instructions, troubleshooting guidance, and procedures for replacing key components like the output electrical cord, input electrical cord, brush holder/brushes, and collector assembly.

ULINE B004SIPL18