Riobel 350C Body Jet Instruction Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Riobel 350C Body Jet. Please read this manual thoroughly before beginning installation or use to ensure proper function and longevity of the product. Retain this manual for future reference.

The Riobel 350C Body Jet is designed to provide a directional and scale-free water spray, enhancing your showering experience. It features a ½" inlet female NPT connection for standard plumbing installations.

2. Safety Information

• Always turn off the main water supply before attempting any installation or maintenance.
• Ensure all plumbing connections are secure to prevent leaks.
• If you are unsure about any part of the installation process, it is recommended to consult a qualified plumber.
• Do not use abrasive cleaners or harsh chemicals on the product finish, as this may cause damage.

3. Package Contents

Verify that all components are present before beginning installation:

• Riobel 350C Body Jet (1 unit)
• Installation hardware (if applicable, not explicitly detailed in product data)
• Instruction Manual (this document)

Note: The product consists of 3 pieces, which typically refers to the main body, the escutcheon, and the spray head assembly.

4. Setup and Installation

The Riobel 350C Body Jet is designed for easy installation, but professional plumbing assistance is recommended to ensure correct setup and compliance with local codes.

1. Prepare the Installation Area: Ensure the wall cavity is prepared according to standard plumbing practices for a ½" NPT connection. The product requires a ½" inlet female NPT connection.
2. Connect Water Supply: Securely connect the water supply line to the ½" female NPT inlet of the body jet. Use appropriate thread sealant to prevent leaks.
3. Mount the Body Jet: Position the body jet and secure it to the wall structure. Ensure the escutcheon sits flush against the finished wall surface.
4. Test for Leaks: Slowly turn on the main water supply and check all connections for leaks. Address any leaks immediately before proceeding.
5. Final Adjustment: Once installed, the directional spray head can be adjusted to your preferred angle.

Figure 1: The Riobel 350C Body Jet. This image displays the Riobel 350C Body Jet. It features a square chrome-finished escutcheon that mounts flush to the wall. The adjustable spray head, also in chrome, extends from the escutcheon and is equipped with multiple nozzles arranged in a circular pattern, designed for directional water flow.

5. Operation

The Riobel 350C Body Jet is designed for straightforward operation in conjunction with your shower system's diverter or valve.

• Activating the Body Jet: Use your shower system's control valve or diverter to direct water flow to the body jet.
• Adjusting Spray Direction: The body jet features a directional spray head. Gently pivot the spray head to adjust the angle of the water flow to your desired position.

6. Maintenance

Regular cleaning and maintenance will help preserve the finish and performance of your Riobel 350C Body Jet.

• Cleaning the Finish: Clean the chrome finish with a soft, damp cloth and mild soap. Rinse thoroughly and dry with a soft cloth to prevent water spots. Avoid abrasive cleaners, scouring pads, or chemicals containing ammonia, bleach, or alcohol, as these can damage the finish.
• Scale-Free Nozzles: The body jet is designed with scale-free nozzles. If mineral deposits accumulate, gently rub the rubber nozzles with your finger or a soft brush to dislodge them. This helps maintain optimal spray performance.

7. Troubleshooting

If you encounter issues with your Riobel 350C Body Jet, refer to the following common problems and solutions:

• Low Water Pressure:
  • Ensure the main water supply is fully open.
  • Check for any blockages in the water supply line or the body jet's inlet.
  • Verify that the shower system's control valve is fully open to the body jet.
• Leaking from Connections:
  • Turn off the water supply.
  • Inspect all threaded connections. Tighten any loose connections and reapply thread sealant if necessary.
• Irregular Spray Pattern:
  • Check the scale-free nozzles for mineral buildup. Gently rub them to clear any blockages.

If the problem persists, contact Riobel customer support or a qualified plumber.

8. Specifications

9. Warranty Information

The Riobel 350C Body Jet is covered by a LIMITED LIFETIME WARRANTY. For specific terms and conditions of the warranty, please refer to the official Riobel warranty documentation or contact Riobel customer service.

10. Customer Support

For further assistance, technical support, or to inquire about replacement parts, please contact Riobel customer service. Contact information can typically be found on the manufacturer's official website or on your purchase documentation.