Accumulair X8796

Download PDF
Contents

Lennox X8796 MERV 16 Maintenance Kit User Manual

For PureAir Air Cleaner Model PCO16-28

1. Introduction

This manual provides essential information for the proper use and maintenance of the Lennox X8796 MERV 16 Maintenance Kit. This kit is specifically designed for the Lennox PureAir Air Cleaner Model PCO16-28, ensuring optimal performance and air quality within your environment.

Regular replacement of the components in this kit is crucial for the effective operation of your PureAir system, maintaining its ability to filter airborne particles and reduce odors.

2. Product Components

The Lennox X8796 MERV 16 Maintenance Kit includes the following genuine Lennox replacement parts:

  • 1 - MERV 16 Pleated Filter (Model X8789): This high-efficiency filter captures a wide range of airborne particles, including dust, pollen, mold spores, and pet dander.
  • 1 - PCO Metal Insert (Model X8792): This insert features a titanium dioxide catalyst surface, essential for the photocatalytic oxidation (PCO) process that breaks down odors and volatile organic compounds (VOCs).
  • 2 - UV Bulbs (Model X8794): These ultraviolet lamps work in conjunction with the PCO metal insert to neutralize airborne contaminants.
Lennox X8796 MERV 16 Maintenance Kit components including a pleated air filter, a foil-wrapped PCO metal insert, and two UV bulbs.

This image displays the complete Lennox X8796 MERV 16 Maintenance Kit. Visible are the large pleated MERV 16 air filter (model X8789), a foil-wrapped PCO metal insert (model X8792) to its right, and two smaller boxes containing the X8794 UV bulbs in the foreground.

3. Installation and Replacement

For optimum performance and to ensure the longevity of your Lennox PureAir system, it is essential to replace the components of this kit at the recommended intervals. Always refer to your specific Lennox PureAir Air Cleaner manual for detailed, model-specific instructions before proceeding. Ensure the unit is powered off and unplugged before beginning any maintenance.

3.1. Replacing the MERV 16 Pleated Filter (X8789)

  1. Locate the filter access panel on your PureAir system.
  2. Open the access panel and carefully slide out the old filter. Note the direction of the airflow arrow on the old filter.
  3. Insert the new MERV 16 pleated filter (X8789) into the system, ensuring the airflow arrow on the new filter points in the same direction as the original.
  4. Close and secure the filter access panel.

3.2. Replacing the PCO Metal Insert (X8792)

Important: DO NOT WASH the metal insert, as this will destroy the titanium dioxide catalyst that coats the insert surface.

  1. With the unit powered off and unplugged, locate the PCO metal insert within your PureAir system.
  2. Carefully remove the old PCO metal insert.
  3. Unwrap the new PCO metal insert (X8792) and gently slide it into its designated slot.
  4. Ensure it is seated correctly.

3.3. Replacing the UV Bulbs (X8794)

  1. Ensure the PureAir system is powered off and unplugged.
  2. Locate the UV bulb housing. This may require opening an additional access panel.
  3. Carefully remove the old UV bulbs. Handle them by the base to avoid touching the glass.
  4. Insert the new UV bulbs (X8794) into their sockets. Do not force them.
  5. Close any opened access panels.

After replacing all components, plug in and power on your Lennox PureAir Air Cleaner. Reset any maintenance indicators as per your system's instructions.

4. Maintenance Schedule

For optimal performance of your Lennox PureAir Air Cleaner, adhere to the following replacement schedule:

  • MERV 16 Pleated Filter (X8789): Replace every 12 months, or more frequently depending on usage and environmental conditions.
  • PCO Metal Insert (X8792): Replace every 24 months.
  • UV Bulbs (X8794): Replace every 24 months.

Frequent filter changes may be required in high dust environments or homes with pets.

5. Troubleshooting

5.1. Significant Drop in Odor Removal Efficiency

If you notice a significant decrease in the system's ability to remove odors, it is an indication that the PCO metal insert and/or UV bulbs may need replacement sooner than the recommended 24-month interval.

  • Action: Replace the PCO metal insert (X8792) and the UV bulbs (X8794) immediately.
  • Consideration: If frequent replacement (more often than every 24 months) is consistently needed, evaluate potential sources of contaminants in your home. Consider implementing source reduction strategies (e.g., reducing use of strong-smelling chemicals) and/or improving ventilation to reduce the overall levels of airborne contaminants.

6. Specifications

AttributeDetail
Brand NameAccumulair
Model InfoX8796
Item Weight7.4 pounds
Product Dimensions27.5 x 4 x 25 inches
Item Model NumberX8796
Part NumberDPFLX8796
Compatible DeviceAir Cleaner (Lennox PureAir Model PCO16-28)
Material TypeMetal
MERV Rating16
ManufacturerLennox
Date First AvailableMarch 4, 2011

7. Warranty and Support

Specific warranty information for the Lennox X8796 MERV 16 Maintenance Kit components is typically provided with the original Lennox PureAir Air Cleaner system or can be obtained directly from Lennox or your authorized dealer. As this is a maintenance kit, components are consumables and may have different warranty terms than the main appliance.

For further assistance, technical support, or to inquire about warranty details, please contact Lennox customer service or visit the official Accumulair Store on Amazon for product information.

© 2025 Accumulair. All rights reserved. Lennox is a registered trademark.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.