Introduction
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Yamaha HS-1200D Hi-Hat Stand. Designed for professional drummers, this 2-legged, double-braced stand features a direct drive mechanism, ensuring reliability, durability, and versatility. Please read this manual thoroughly before using the product to ensure proper and safe operation.
Key Features
- Two Double-Braced Legs: Provides exceptional stability and support for rigorous use.
- Direct Drive Mechanism: Ensures smooth, responsive, and consistent pedal action.
- Locking Clutch: Securely holds the top hi-hat cymbal in place, preventing slippage during performance.
- Two Length Upper Pull Rods: Includes both short and long pull rods to accommodate individual player preferences and setup configurations.
- Reversible Felts: Allows for adjustment of hi-hat cymbal sustain by choosing between felt and rubber surfaces.
- Rotating Legs: Offers flexibility in positioning the stand within a drum kit setup, especially useful for double bass pedal configurations.
- Retractable Spikes: Provides additional grip on carpeted surfaces, ensuring the stand remains stable.
Setup Instructions
Follow these steps to properly set up your Yamaha HS-1200D Hi-Hat Stand:
- Unfold the Legs: Carefully unfold the two double-braced legs until they are fully extended and locked into position. Ensure the stand is stable on a flat surface.
- Adjust Leg Position: The legs can be rotated to accommodate other pedals or drum kit components. Loosen the wing nut at the base of the stand, adjust the legs to your desired position, and then securely tighten the wing nut.
- Insert Pull Rod: Select either the short or long upper pull rod based on your preferred hi-hat height and playing style. Insert the chosen pull rod into the main shaft of the stand.
- Attach Hi-Hat Clutch: Thread the bottom hi-hat cymbal onto the pull rod, followed by the reversible felt/rubber washer (choose the desired surface facing the cymbal). Then, attach the top hi-hat cymbal using the locking clutch. Ensure the clutch is securely fastened to prevent the cymbal from slipping.
- Adjust Height: Loosen the height adjustment clamp on the main shaft. Raise or lower the upper section of the stand to your desired playing height. Securely tighten the clamp.
- Engage Spikes (Optional): For increased stability on carpeted surfaces, gently push down on the stand to engage the retractable spikes located on the leg tips.
Figure 1: The Yamaha HS-1200D Hi-Hat Stand fully assembled, showcasing its two double-braced legs and direct drive pedal.
Figure 2: A detailed view of the stand's base, highlighting the robust double-braced legs and the sturdy pedal assembly.
Operation
Adjusting Pedal Tension
The HS-1200D features a multi-stage tension adjustment to customize the feel of the pedal. Locate the tension adjustment knob near the base of the pedal. Rotate it clockwise to increase tension for a faster, more responsive feel, or counter-clockwise to decrease tension for a lighter, more relaxed feel. Experiment with different settings to find what best suits your playing style and the weight of your hi-hat cymbals.
Utilizing the Locking Clutch
The locking clutch ensures your top hi-hat cymbal remains firmly in place. To adjust or remove the top cymbal, use a drum key to loosen the clutch. Once the cymbal is positioned, tighten the clutch securely with the drum key to prevent any movement during play. This design eliminates common issues of cymbals loosening during intense drumming.
Figure 3: The direct drive pedal, showing the footboard and linkage for precise control.
Figure 4: The rotating leg mechanism, allowing for flexible placement within a drum setup.
Maintenance
- Cleaning: Wipe down chrome surfaces regularly with a soft, dry cloth to prevent smudges and corrosion. For stubborn dirt, use a mild, non-abrasive cleaner.
- Lubrication: Periodically apply a small amount of silicone-based lubricant to moving parts, such as the pedal hinge and pull rod, to ensure smooth operation and prevent squeaks.
- Inspection: Regularly check all nuts, bolts, and clamps to ensure they are tight. Loose hardware can affect stability and performance.
- Storage: When not in use, collapse the stand and store it in a dry, temperate environment to protect it from extreme conditions.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Hi-hat cymbals slipping or rotating. | Clutch not tightened sufficiently. | Ensure the locking clutch is tightened firmly with a drum key. |
| Pedal feels stiff or squeaky. | Lack of lubrication; debris in mechanism. | Apply silicone-based lubricant to moving parts. Clean any visible debris. |
| Stand wobbles or is unstable. | Legs not fully extended or tightened; uneven surface. | Ensure legs are fully extended and all clamps are tight. Use retractable spikes on carpet. Place on a level surface. |
Specifications
- Model: HS-1200D
- Brand: Yamaha
- Leg Type: Two-Leg, Double-Braced
- Drive System: Direct Drive
- Clutch: Locking Clutch
- Included Accessories: Short and Long Upper Pull Rods
- Item Weight: 13.65 pounds (6.19 kg)
- Product Dimensions (L x W x H): 29.13 x 8.27 x 7.87 inches (74 x 21 x 20 cm)
- UPC: 086792897097
Warranty & Support
The Yamaha HS-1200D Hi-Hat Stand comes with a 5-year warranty. For warranty claims, technical support, or service inquiries, please contact Yamaha customer service or visit the official Yamaha website. Keep your proof of purchase for warranty validation.
For more information and resources, visit the Yamaha Store on Amazon.
Product Overview Video
Video 1: An official product overview of the Yamaha HS-1200 Series Hi-Hat Stands, demonstrating key features such as the direct drive mechanism, locking clutch, and leg adjustability. This video provides visual guidance on the stand's robust construction and functional benefits. (Duration: 6 minutes, 20 seconds)