Oasis BPO1SHS WHI w/WTG
Oasis Atlantis Hot 'N Cold Bottled Water Cooler User Manual
Model: BPO1SHS WHI w/WTG
Brand: Oasis
Product Overview
The Oasis Atlantis Hot 'N Cold Bottled Water Cooler, model BPO1SHS WHI w/WTG, is designed to provide convenient access to both hot and cold water. Its contemporary round front design and durable polyethylene cabinet ensure it will not dent or rust, making it a long-lasting addition to any home or office. The integrated WaterGuard system minimizes spills during bottle changes, enhancing user experience.
Image: The Oasis Atlantis Hot 'N Cold Bottled Water Cooler in white, with a large water bottle placed on top. It features red and blue spigots for hot and cold water, respectively, and a drip tray at the base.
Key Features
- Hot and Cold Water Dispensing: Provides instant access to both hot and cold water for various needs.
- Durable Construction: Features a contemporary round front design with a polyethylene cabinet that resists dents and rust.
- WaterGuard System: Engineered to prevent spills and leaks during the process of changing water bottles.
- Removable Drip Tray: The drip tray is easily removable and dishwasher safe for convenient cleaning.
- Easy Portability: Equipped with a handle on the back for simple transport and repositioning.
Setup Guide
- Unpacking: Carefully remove the water cooler from its packaging. Inspect for any damage.
- Placement: Place the cooler on a flat, level surface away from direct sunlight and heat sources. Ensure adequate ventilation around the unit.
- Initial Cleaning: Before first use, clean the drip tray and the water contact surfaces according to the maintenance instructions.
- Install Water Bottle: Remove the cap from a standard 3 or 5-gallon water bottle. Carefully lift the bottle and place it onto the WaterGuard system at the top of the cooler. The system is designed to pierce the bottle cap and prevent spills.
- Prime the System: Before plugging in, dispense water from both the hot and cold spigots until water flows steadily. This removes air from the tanks.
- Power Connection: Plug the power cord into a grounded electrical outlet.
- Activate Heating/Cooling: Locate the hot and cold power switches on the back of the unit. Turn them ON. Allow approximately 15-30 minutes for the water to reach optimal hot and cold temperatures.
Operating Instructions
Dispensing Cold Water:
Place your cup or container under the blue (cold water) spigot. Push the blue lever down to dispense cold water. Release the lever to stop the flow.
Dispensing Hot Water:
Place your cup or container under the red (hot water) spigot. This spigot typically has a child-safety feature. To dispense hot water, you may need to push a safety button or slide a lock before pushing the red lever down. Release the lever to stop the flow. Caution: Hot water is extremely hot and can cause burns. Always supervise children.
Maintenance
Drip Tray Cleaning:
The drip tray should be emptied and cleaned regularly to prevent overflow and bacterial growth. Simply pull the tray forward to remove it. It is dishwasher safe for easy cleaning.
Exterior Cleaning:
Wipe the exterior of the cooler with a soft, damp cloth. Do not use abrasive cleaners or solvents.
Internal Cleaning (Sanitization):
It is recommended to sanitize the internal water tanks every 3-6 months. Unplug the unit and remove the water bottle. Drain all water from both spigots. Prepare a sanitizing solution (e.g., mild bleach solution or a commercial water cooler cleaning kit). Pour the solution into the top reservoir and allow it to sit for the recommended time. Drain the solution completely through both spigots. Rinse thoroughly by filling and draining with fresh water several times until no residual odor or taste remains. Reinstall the water bottle and plug in the unit.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No water dispensing. | Empty water bottle; airlock in system. | Replace bottle; prime the system by dispensing from both spigots until water flows. |
| Water not hot/cold. | Heating/cooling switch OFF; unit unplugged. | Ensure unit is plugged in and hot/cold switches on the back are ON. Allow time for temperature adjustment. |
| Water tastes "plastic" or off. | New unit odor; need for sanitization. | Sanitize the unit thoroughly before first use or if taste persists. Ensure water bottles are clean. |
| Unit is noisy. | Normal compressor operation; unit not level. | Ensure the unit is on a flat, stable surface. Some noise during heating/cooling cycles is normal. |
Product Specifications
| Attribute | Detail |
|---|---|
| Model Number | BPO1SHS WHI w/WTG |
| Color | White |
| Material | Polyethylene (PE) |
| Product Dimensions (D x W x H) | 12.81"D x 13"W x 43.88"H |
| Item Weight | 30 Pounds |
| Wattage | 575 watts |
| Installation Type | Countertop |
| Access Location | Top |
| Number of Settings | 2 (Hot, Cold) |
| Upper Temperature Rating | 200+ Degrees Fahrenheit |
| Power Source | Corded Electric |
| Certification | ENERGY STAR |
Warranty & Support
This Oasis water cooler comes with a 3-year warranty. For warranty claims, technical support, or service inquiries, please contact Oasis customer service. Refer to the product packaging or the manufacturer's official website for the most current contact information.
For additional support and resources, including FAQs and detailed troubleshooting guides, please visit the official Oasis website.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.