DAC Ventilated Height and Angle Adjustable Laptop Stand Riser MP-195 User Manual

1. Introduction

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your DAC Ventilated Height and Angle Adjustable Laptop Stand Riser, model MP-195. Designed for laptops and notebook computers ranging from 13 to 18 inches, this stand aims to improve ergonomic posture and promote laptop cooling. Please read this manual thoroughly before use to ensure proper setup and optimal performance.

2. Package Contents

Verify that all components are present in the package:

• 1 x Platform
• 4 x Leg Blocks (two sets for different heights)
• 8 x Adhesive Non-skid Foam Pads
• 1 x Instruction Sheet (this document)

Image 2.1: All components of the DAC Laptop Stand, including the main platform, two sets of leg blocks for height adjustment, and non-skid foam pads.

3. Setup and Assembly

1. Choose Height Setting: The stand offers three height and angle adjustments. Select one of the two sets of leg blocks provided. The shorter set provides a lower elevation, while the taller set provides a higher elevation. The leg blocks are designed to be used individually, not stacked.
   

   Image 3.1: Illustration of the three possible height and angle configurations for the laptop stand, achieved by using different leg block sets.

2. Attach Leg Blocks: Insert the chosen leg blocks into the designated slots on the underside of the platform. Ensure they are securely fitted.
   

   Image 3.2: The underside of the stand, highlighting the slots where the leg blocks are to be inserted for height adjustment.

3. Apply Non-skid Foam Pads: Peel the backing from the adhesive non-skid foam pads and apply them to the bottom of the leg blocks and the front support points of the stand. These pads prevent the stand from sliding on your desk surface.
   

   Image 3.3: A detailed view showing the placement of the non-skid foam pads on the base of the stand, designed to enhance stability.

4. Position Laptop: Place your laptop or notebook computer on the stand. The front lip of the stand will secure the laptop in place.
   

   Image 3.4: The DAC Laptop Stand with a laptop positioned on its surface, demonstrating its intended use.

4. Operating Instructions

The DAC Laptop Stand is designed for straightforward use. Once assembled, simply place your laptop on the platform.

• Ergonomic Adjustment: Adjust the height by selecting the appropriate leg blocks to achieve an ergonomic viewing angle. Your eyes should look slightly down when viewing the middle of the screen to reduce neck strain.
• Ventilation: The ventilated platform design allows for improved airflow around your laptop, helping to prevent overheating.
• Cable Management: Utilize the six integrated slots at the rear of the stand to organize and route your cables, keeping them "connection ready" and your workspace tidy.
  

  Image 4.1: The rear of the stand featuring six slots designed for organizing and managing cables.

5. Maintenance

The DAC Laptop Stand requires minimal maintenance.

• Cleaning: Wipe the stand with a soft, damp cloth. Avoid using abrasive cleaners or solvents, as these may damage the material.
• Inspection: Periodically check the leg blocks and non-skid pads for wear and tear. Replace if necessary to maintain stability.

6. Troubleshooting

7. Specifications

8. Warranty Information

The product information mentions a "Lifetime warranty". For specific details regarding warranty coverage, terms, and conditions, please refer to the official DAC product website or contact DAC customer support.

9. Customer Support

For further assistance, technical support, or inquiries regarding your DAC Ventilated Height and Angle Adjustable Laptop Stand Riser, please visit the official DAC website or contact their customer service department.

Online Resources: Visit the DAC Store on Amazon