Product Overview
The Philips SRP1103/27 Universal Remote Control is designed for comfortable use, featuring an ergonomic design and clearly grouped buttons. It is compatible with over 325 device types, offering a streamlined control experience for your home entertainment system.
Key Features:
- Well-sized buttons for improved operability and readability.
- Natural fit and comfortable to hold.
- Works with more than 325 device types.
- Dedicated online support service available.
Image: Front view of the Philips SRP1103/27 Universal Remote Control, highlighting the layout of all buttons for various functions.
Setup Instructions
Inserting Batteries
The Philips SRP1103/27 remote control requires two AAA batteries (not included). Ensure correct polarity when inserting the batteries.
Image: Rear view of the Philips SRP1103/27 Universal Remote Control with the battery cover removed, showing the two AAA battery slots.
Programming Your Remote Control
There are two primary methods to program your Philips SRP1103/27 Universal Remote Control: automatic code search and direct code entry. Ensure the device you wish to control (e.g., TV, DVD player, audio system) is powered on before starting the programming process.
Method 1: Automatic Code Search
- Power On Device: Ensure the device you want to control is turned on.
- Enter Setup Mode: Press and hold the SETUP button on the remote until the red indicator light stays lit.
- Select Device Type: Press the corresponding device button (e.g., TV, DVD, AUDIO) once. The red indicator light will blink once and then remain lit.
- Initiate Code Search: Point the remote at your device and repeatedly press the POWER button until your device turns off. This may take several presses as the remote cycles through codes.
- Confirm Code: Once the device turns off, press the same device button (e.g., TV) again to save the code. The red indicator light will turn off.
- Test Functionality: Test all functions (power, volume, channels) to ensure the remote is fully programmed. If some functions do not work, repeat the process.
Method 2: Direct Code Entry
- Power On Device: Ensure the device you want to control is turned on.
- Locate Code: Refer to the code list provided with your remote control to find the 4-digit code for your device's brand. If multiple codes are listed, try them one by one.
- Enter Setup Mode: Press and hold the SETUP button on the remote until the red indicator light stays lit.
- Select Device Type: Press the corresponding device button (e.g., TV, DVD, AUDIO) once. The red indicator light will blink once and then remain lit.
- Enter 4-Digit Code: Enter the 4-digit code using the number buttons on the remote. After entering the last digit, the red indicator light should turn off.
- Test Functionality: Test all functions (power, volume, channels) to ensure the remote is fully programmed. If some functions do not work, or the red light blinks rapidly after entering the code, the code was incorrect. Repeat the process with the next code from the list.
Operating Your Remote Control
The Philips SRP1103/27 Universal Remote Control features an intuitive layout for easy operation of your devices.
Button Functions:
- POWER: Turns the selected device on or off.
- INPUT: Cycles through input sources (e.g., HDMI 1, HDMI 2).
- TV/SAT/CBL/DVD/AUD: Selects the device to be controlled.
- VOL +/-: Adjusts the volume of the selected device.
- CH +/-: Changes channels on the selected device.
- MUTE: Mutes or unmutes the audio.
- LAST: Returns to the previously viewed channel.
- MENU/GUIDE/INFO/EXIT: Navigation and information buttons for on-screen menus.
- Directional Arrows (Up/Down/Left/Right) & OK: Used for navigating menus and confirming selections.
- Playback Controls (Play, Pause, Stop, Rewind, Fast Forward): Controls media playback on compatible devices.
- Number Pad (0-9): Direct channel entry and code input.
- Colored Buttons (A, B, C, D): May have specific functions depending on the device or application.
Maintenance
Battery Replacement
When the remote control's performance degrades or the indicator light does not respond, it's time to replace the batteries. Open the battery compartment cover on the back of the remote, remove the old AAA batteries, and insert two new AAA batteries, ensuring correct polarity. Replace the cover securely.
Cleaning
To clean your remote control, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or alcohol, as these can damage the surface and internal components.
Troubleshooting
- Remote not responding: Ensure fresh batteries are installed with correct polarity. Reprogram the remote using either the automatic code search or direct code entry method.
- Some buttons not working: If only certain buttons are unresponsive after programming, try using a different code for your device from the provided code list. Some devices may have multiple compatible codes.
- Device not turning off during automatic search: Continue pressing the POWER button. If the device still does not turn off after many presses, try the direct code entry method.
- Red indicator light blinks rapidly after code entry: This indicates an invalid code was entered. Re-enter the code carefully or try a different code from the list.
Specifications
- Model Number: SRP1103/27
- Brand: Philips
- Product Dimensions: 1 x 4.5 x 10.8 inches
- Item Weight: 4 ounces
- Batteries: 2 AAA batteries required (not included)
- Max Number of Supported Devices: Controls one device at a time.
- Connectivity Technology: Infrared
- Special Feature: Ergonomic, Universal
- Color: Black
- Manufacturer: Philips Peripherals and Accessories
- Date First Available: July 1, 2011
Warranty & Support
Legal Disclaimer:
Batteries are NOT included. The manufacturer is primarily responsible for the quality of the electronic device. The manufacturer provides a 1-year warranty.
Product Support:
For additional support, please visit the official Philips support website or refer to the documentation included with your product.
You can also visit the Philips Store on Amazon for more information.