Vivitar VIV-VT-6 6-Inch Table Tripod Instruction Manual

Introduction

Thank you for choosing the Vivitar VIV-VT-6 6-Inch Table Tripod. This ultra-compact tripod is designed for portability and stability, making it an ideal accessory for photographers and videographers on the go. Its sturdy construction ensures reliable support for most digital cameras and camcorders. Please read this manual carefully to understand the features and proper operation of your new tripod.

Image: The Vivitar VIV-VT-6 6-Inch Table Tripod, showcasing its compact design and adjustable ball head. This model is shown in red.

Product Features

• Compact Design: Six inches tall, perfect for tabletop use or travel.
• Wide Compatibility: Works with most digital cameras and camcorders.
• Durable Construction: Strong and durable materials ensure longevity.
• Quick Release Function: Provides amazing versatility for fast camera attachment and detachment.
• Rotatable Ball Head: Allows for flexible positioning and angle adjustments.

Package Contents

Please check the package for the following items:

• Vivitar VIV-VT-6 6-Inch Table Tripod (1 unit)

Setup Instructions

1. Unfold the Legs: Gently pull the three legs outwards until they are fully extended and locked into position. Ensure the tripod stands stably on a flat surface.
2. Attach Your Camera: Locate the quick release plate on the tripod's ball head. Screw the camera onto the quick release plate by rotating the camera clockwise until it is securely fastened.
3. Mount the Camera to Tripod: Slide the quick release plate with the attached camera into the receiver on the tripod's ball head. Ensure it clicks into place or is secured by the locking mechanism.
4. Adjust Angle: Loosen the locking knob on the ball head to adjust the camera's angle. Once the desired angle is achieved, tighten the locking knob firmly to secure the camera in position.

Image: A close-up view of the Vivitar VIV-VT-6 tripod's ball head and quick release plate, illustrating how a camera would attach. This variant is blue.

Operating Instructions

1. Positioning: Place the tripod on a stable, level surface. For uneven surfaces, adjust the leg spread to maintain balance.
2. Angle Adjustment: To change the camera's angle, slightly loosen the ball head's locking knob. Adjust the camera to the desired position, then re-tighten the knob securely.
3. Quick Release: To quickly remove your camera, disengage the quick release locking mechanism (if present) and slide the plate out. To re-attach, slide the plate back in until it locks.

Maintenance

• Cleaning: Wipe the tripod with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid harsh chemicals or abrasive cleaners.
• Storage: Store the tripod in a cool, dry place away from direct sunlight and extreme temperatures. Ensure all knobs are slightly loosened before storage to prevent stress on components.
• Inspection: Periodically check all screws and joints for tightness. Do not overtighten.

Troubleshooting

Specifications

Warranty and Support

For warranty information or technical support, please refer to the official Vivitar website or contact their customer service directly. Keep your purchase receipt as proof of purchase.

Vivitar is a registered trademark. All rights reserved.