WowWee Light Strike Assault Striker with Simple Target User Manual

1. Introduction

This manual provides instructions for the setup, operation, and maintenance of your WowWee Light Strike Assault Striker with Simple Target. The Light Strike system brings interactive laser tag action into the real world, allowing for individual challenges, one-on-one play, or team battles.

2. Safety Information

WARNING:

This product contains small parts and is not suitable for children under 3 years of age due to a potential choking hazard. Adult supervision is recommended during play.

3. Package Contents

Verify that all items are present in your package:

• 1x Light Strike Assault Striker (Red)
• 1x Simple Target

Image 1: The Light Strike Assault Striker and Simple Target as packaged.

4. Setup

4.1 Battery Installation

The Assault Striker requires 3 AAA batteries. The Simple Target may also require batteries (check its specific instructions if provided separately).

1. Locate the battery compartment on the Assault Striker, typically on the handle or underside.
2. Using a small Phillips head screwdriver, open the battery compartment cover.
3. Insert 3 AAA batteries, ensuring correct polarity (+/-).
4. Replace the battery compartment cover and secure it with the screw.
5. Repeat for the Simple Target if it uses separate batteries.

Note: For optimal performance, use fresh alkaline batteries. Rechargeable AAA and AA batteries are supported.

5. Operation

5.1 Powering On

Locate the power switch on the Assault Striker and slide it to the "ON" position. The striker will emit interactive lights and sounds, indicating it is ready for play.

5.2 Basic Gameplay

The Light Strike Assault Striker features built-in weapon features and interactive elements:

• Firing: Press the trigger to fire laser blasts. The striker has unlimited ammo.
• Shield Activation: Activate the shield feature to temporarily reduce incoming damage from opponents. Refer to the striker's controls for the specific shield button or gesture.
• Customization: The striker is customizable with built-in weapon features and can accept separate attachments (sold separately) to enhance gameplay.
• Interactive Feedback: The striker provides interactive lights and sounds to indicate hits, damage, shield status, and other game events.

5.3 Using the Simple Target

The included Simple Target allows for individual practice or objective-based gameplay:

1. Place the Simple Target in a desired location.
2. Power on the target (if it has a separate power switch).
3. Aim your Assault Striker at the target and fire. The target will react with lights and sounds when hit.
4. The target can be used for accuracy training or as an objective in team-based games.

Image 2: An individual operating the Light Strike Assault Striker.

Image 3: Multiple players using Light Strike Assault Strikers in a game.

6. Maintenance

6.1 Cleaning

To clean your Assault Striker and Simple Target, wipe them with a soft, dry cloth. Do not use abrasive cleaners or immerse the devices in water.

6.2 Battery Replacement

When the lights dim or sounds become faint, it is time to replace the batteries. Follow the battery installation steps outlined in Section 4.1.

7. Troubleshooting

• Device not powering on:
  • Ensure batteries are installed correctly with proper polarity.
  • Replace old batteries with fresh ones.
  • Check that the power switch is fully in the "ON" position.
• Target not registering hits:
  • Ensure the target is powered on.
  • Verify that the Assault Striker is powered on and firing.
  • Check the distance and angle to the target; direct line of sight is required.
  • Ensure no obstructions are blocking the sensor on the target.
• Faint lights or sounds:
  • This indicates low battery power. Replace all batteries in the device.

8. Specifications

9. Warranty and Support

9.1 Manufacturer Warranty

This product is covered by a 90-day warranty against manufacturer defects. Please retain your proof of purchase for warranty claims.

9.2 Customer Support

For technical assistance or further inquiries, please refer to the manufacturer's official website or contact their customer support department. Contact information is typically found on the product packaging or the manufacturer's website.