1. Introduction
Thank you for purchasing the Scythe Kama Bay AMP 2000 Rev B Amplifier. This manual provides essential information for the safe and efficient use of your amplifier. Please read it thoroughly before installation and operation, and retain it for future reference.
2. Safety Information
- Do not expose the unit to rain, moisture, or extreme temperatures.
- Ensure proper ventilation to prevent overheating.
- Use only the provided AC adapter.
- Do not open the amplifier casing; refer servicing to qualified personnel.
- Keep out of reach of children.
- Disconnect power before making any connections or cleaning.
3. Package Contents
Verify that all items are present in the package:
- Scythe Kama Bay AMP 2000 Rev B Amplifier
- AC Power Adapter
- RCA Audio Cables
- 3.5mm Stereo Audio Cable
- Speaker Wires
- PC Mounting Hardware (for 5.25-inch bay installation)
- Installation Guide
Figure 3.1: Included accessories for the Kama Bay AMP 2000 Rev B Amplifier. This image displays the amplifier's power adapter, various audio cables (RCA, 3.5mm), speaker wires, and PC mounting brackets, alongside the instruction manual.
4. Product Overview
4.1 Front Panel
Figure 4.1: Front panel of the Scythe Kama Bay AMP 2000 Rev B Amplifier. This view shows the power button, headphone jack, mute button, input selector, volume control, and USB power port, along with the dual VU meters.
- Power Button: Turns the amplifier on or off.
- Phones Jack (6.3mm): Connect headphones for private listening.
- Mute Button: Mutes or unmutes the audio output.
- Input Selector: Rotary switch to select between Input I, II, III, and IV.
- Volume Control: Adjusts the overall output volume.
- Bass/Treble Controls: Adjusts bass and treble levels.
- VU Meters: Displays the audio output level.
- USB Power Port (Front): Provides 5V USB power for charging devices.
4.2 Rear Panel
Figure 4.2: Rear panel of the Scythe Kama Bay AMP 2000 Rev B Amplifier. This detailed view highlights the speaker terminals, multiple RCA input jacks, DC power input, and rear USB power port.
- Speaker Outputs (Left/Right): Connect passive speakers using banana plugs or bare wire.
- Input I, II, III (RCA Stereo): Connect audio sources with RCA outputs.
- Input IV (3.5mm Stereo): Connect audio sources with a 3.5mm jack (located on the front panel).
- DC IN (+12V === 3A): Connect the provided AC power adapter.
- USB Power Port (Rear): Provides 5V USB power for charging devices or powering low-power USB accessories.
- Analog Meter Output: For connecting external analog meters (if desired).
5. Setup
5.1 Connecting Speakers
- Ensure the amplifier is powered off.
- Connect your passive speakers to the Speaker Outputs on the rear panel. Match the positive (+) terminal on the amplifier to the positive (+) terminal on your speaker, and the negative (-) to the negative (-).
- You can use banana plugs or bare speaker wire. For bare wire, unscrew the terminal cap, insert the wire, and tighten the cap securely.
5.2 Connecting Audio Sources
- For devices with RCA outputs (e.g., CD player, DVD player, turntable with pre-amp), connect them to Input I, II, or III using RCA cables.
- For devices with a 3.5mm stereo output (e.g., smartphone, MP3 player), connect them to the Input IV jack on the front panel using a 3.5mm stereo cable.
5.3 Power Connection
- Connect the provided AC adapter to the DC IN (+12V === 3A) port on the rear panel.
- Plug the AC adapter into a suitable wall outlet.
5.4 PC Integration (Optional)
The Kama Bay AMP 2000 Rev B can be installed into a 5.25-inch drive bay of a PC case. Use the included PC mounting hardware for this installation. The amplifier also features a connection to synchronize its power state with your PC's power supply, allowing it to turn on and off with your computer.
6. Operating Instructions
6.1 Powering On/Off
Press the Power Button on the front panel to turn the amplifier on. The VU meters will illuminate. Press it again to turn the amplifier off.
6.2 Selecting Input
Rotate the Input Selector knob on the front panel to choose the desired audio source (Input I, II, III, or IV).
6.3 Adjusting Volume
Turn the Volume Control knob clockwise to increase the volume and counter-clockwise to decrease it.
6.4 Using Headphone Output
Plug your headphones into the Phones Jack on the front panel. This will typically mute the speaker output.
6.5 Mute Function
Press the Mute Button to temporarily silence the audio output. Press it again to restore the sound.
6.6 Bass and Treble Control
Use the dedicated Bass and Treble knobs to fine-tune the low and high frequencies of your audio output to your preference.
6.7 USB Power Ports
The front and rear USB ports are for charging compatible devices or powering low-current USB accessories. They do not transmit audio data.
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the amplifier. Do not use liquid cleaners or solvents.
- Ventilation: Ensure that the ventilation openings are not blocked to prevent overheating.
- Storage: If storing the unit for an extended period, disconnect it from power and store it in a cool, dry place.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power adapter not connected; Power outlet faulty; Amplifier off. | Check power connections; Try a different outlet; Press the Power button. |
| No sound | Incorrect input selected; Volume too low; Speakers not connected; Mute engaged; Source device off/muted. | Select correct input; Increase volume; Check speaker connections; Disengage Mute; Check source device. |
| Distorted sound | Volume too high; Poor cable connection; Source audio quality. | Reduce volume; Check all cable connections; Test with a different audio source. |
| One channel silent | Loose speaker wire; Faulty cable; Speaker issue. | Check speaker wire connections for both channels; Swap cables to isolate issue; Test with another speaker. |
9. Specifications
- Model Number: SDAR-2100
- Manufacturer: Scythe
- Output Power: 10W x 2 channels (at 8 Ohm)
- Signal-to-Noise Ratio (SNR): 103 dB
- Total Harmonic Distortion (THD): 0.02%
- Product Dimensions (W x D x H): 3.05 x 12.3 x 6.69 inches (7.75 x 31.24 x 17 cm)
- Item Weight: 3.15 pounds (1.43 kg)
- Inputs:
- 3 x RCA Stereo (Rear)
- 1 x 3.5mm Stereo (Front)
- Outputs:
- 2 x Speaker Terminals (Banana/Spade compatible)
- 1 x 6.3mm Headphone Jack (Front)
- Additional Features: Bass/Treble Control, Dual VU Meters, Front & Rear USB Power Ports, PC 5.25-inch Bay Mountable.
10. Warranty Information
This product is covered by a limited manufacturer's warranty. Please refer to the warranty card included in your package or visit the official Scythe website for detailed terms and conditions. Keep your purchase receipt as proof of purchase for any warranty claims.
11. Support
For technical support, troubleshooting assistance, or further inquiries, please visit the official SCYTHE website or contact their customer service department. Contact information can typically be found on the manufacturer's website or in the product packaging.
