1. Introduction
Thank you for choosing the Velleman MK111 Interval Timer Kit. This kit provides a versatile interval timer that can be used in various applications requiring timed switching. As a kit, it requires assembly, including soldering, making it an excellent project for those with basic electronics and soldering experience. This manual will guide you through the assembly, operation, and maintenance of your MK111 Interval Timer.
2. Safety Information
- Adult Supervision: This kit is recommended for users aged 12 years and up. Younger users should have adult supervision during assembly.
- Soldering Safety: Always use appropriate safety gear, including eye protection, when soldering. Ensure adequate ventilation to avoid inhaling solder fumes. Use a heat-resistant surface.
- Electrical Safety: Ensure the power supply is disconnected before making any connections or modifications. Do not exceed the specified voltage ratings for the kit.
- Component Handling: Handle electronic components carefully. Some components can be sensitive to static electricity.
- Tools: Use appropriate tools for assembly, such as a soldering iron, solder, wire cutters, and a multimeter.
3. Package Contents
The Velleman MK111 Interval Timer Kit includes all necessary electronic components, a printed circuit board (PCB), and detailed assembly instructions. Please verify that all components are present before beginning assembly. A complete list of components is typically provided within the kit's packaging.
4. Setup and Assembly
The MK111 is a kit that requires soldering. The assembly process typically takes 20-30 minutes for individuals with basic soldering skills. Detailed, step-by-step instructions with diagrams are provided inside the kit's packaging. It is crucial to follow these instructions carefully.
- Preparation: Gather all necessary tools, including a soldering iron, solder, wire cutters, and a clean workspace.
- Component Identification: Identify all components by their values and markings. Pay close attention to polarity for diodes, electrolytic capacitors, and integrated circuits (ICs). Resistors may require a multimeter if color codes are unclear or unmarked.
- Soldering Components: Begin by soldering the smallest components first (resistors, diodes), followed by larger components (capacitors, IC sockets, potentiometers, relay). Ensure strong, shiny solder joints and trim excess leads.
- Integrated Circuit (IC) Installation: If an IC socket is provided, solder the socket first, then carefully insert the IC into the socket, ensuring correct orientation (notch or dot aligns with the marking on the PCB).
- Visual Inspection: After assembly, thoroughly inspect all solder joints for bridges, cold joints, or missing connections. Verify component placement and orientation.

This image displays the fully assembled Velleman MK111 Interval Timer kit, featuring the circuit board with various electronic components such as resistors, capacitors, integrated circuits, and the relay.
5. Operating Instructions
The Velleman MK111 functions as an interval timer, capable of providing timed ON/OFF cycles. The specific timing intervals are adjustable using the onboard potentiometers. Refer to the detailed instructions included in your kit for precise calibration and operation.
- Power Connection: Connect the appropriate DC power supply (voltage specified in the kit's documentation) to the designated power input terminals.
- Timing Adjustment: Use the potentiometers (variable resistors) on the PCB to set the desired ON and OFF durations for the relay output. The range of adjustment depends on the component values used in the circuit.
- Output Connection: The relay provides a switched output. Connect your load (e.g., light, motor) to the relay contacts (normally open, normally closed, and common terminals) as required by your application. Ensure the load's voltage and current ratings do not exceed the relay's specifications.
- Functionality: Once powered, the timer will cycle through its programmed ON and OFF states, activating and deactivating the relay output accordingly.
6. Maintenance
The Velleman MK111 Interval Timer Kit is designed for reliable operation with minimal maintenance. To ensure longevity:
- Keep Clean and Dry: Protect the circuit board from dust, dirt, and moisture.
- Avoid Extreme Conditions: Do not expose the device to extreme temperatures or humidity.
- Component Replacement: If you modify the circuit by replacing components (e.g., to change timing ranges), ensure proper soldering techniques to avoid damaging the PCB traces.
- Power Supply: Always use a stable and correctly rated power supply.
7. Troubleshooting
If your Velleman MK111 Interval Timer is not functioning as expected, consider the following troubleshooting steps:
- No Power/No Activity:
- Check power supply connections and ensure it is providing the correct voltage.
- Verify the polarity of the power connection.
- Inspect for any short circuits or broken traces on the PCB.
- Incorrect Timing:
- Ensure potentiometers are correctly adjusted.
- Verify the values and correct placement of timing components (resistors, capacitors).
- Relay Not Activating:
- Check the relay's solder connections and ensure it is correctly oriented.
- Verify the functionality of the driving transistor or IC.
- General Assembly Issues:
- Re-examine all solder joints for cold joints (dull, lumpy appearance) or solder bridges (solder connecting two points that should be separate).
- Confirm all components are in their correct positions and orientations.
If issues persist, consult the detailed schematic and component layout provided with your kit, or contact Velleman support.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | MK111 |
| Manufacturer | Velleman |
| Product Dimensions | 0.98 x 4.76 x 7.87 inches (approximate, assembled) |
| Item Weight | 1.9 pounds (approximate, packaged) |
| Recommended Age | 12 years and up |
9. Warranty and Support
For warranty information and technical support regarding your Velleman MK111 Interval Timer Kit, please refer to the documentation included with your purchase or visit the official Velleman website. Velleman provides support for their products and can assist with specific technical inquiries or component-related issues.
Velleman Official Website: www.velleman.eu