Introduction
The Velleman MK119 Roulette Kit is an electronic assembly kit designed to create a functional electronic roulette game. This kit requires soldering and basic electronic assembly skills. Once assembled, it features 37 LEDs, generates a spinning sound, and plays a 'winner' tune for each color. It operates with a pushbutton and utilizes microprocessor technology for random outcomes. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting.
Safety Information
Warning: This is an electronic kit that requires soldering. Always exercise caution when working with soldering irons, which operate at high temperatures. Ensure adequate ventilation to avoid inhaling solder fumes. Keep components and tools out of reach of children. Always wear appropriate safety glasses to protect your eyes. Incorrect assembly or soldering can damage components or cause malfunction.
Package Contents
The Velleman MK119 kit includes all necessary electronic components, a printed circuit board (PCB), and hardware for assembly. Before beginning assembly, carefully unpack the kit and verify that all components are present and undamaged. A detailed component list is typically provided within the kit packaging.
Setup and Assembly Instructions
This is an electronic kit and requires assembly. Soldering skills are essential.
Recommended Tools:
- Soldering iron (a long, pointed conical tip is recommended)
- Solder (rosin core, electronic grade)
- Wire cutters/flush cutters
- Small pliers or tweezers
- Safety glasses
- Optional: Desoldering braid or pump, tape to hold components
Assembly Steps:
- Component Identification: Carefully identify all components by referring to the provided circuit diagram and component list. Pay attention to resistor values, capacitor types, and integrated circuit (IC) orientations.
- Resistor Installation: Begin by soldering the resistors onto the PCB. Resistors are not polarized, but ensure their values match the positions on the PCB. Bend the leads, insert them into the correct holes, and solder one lead at a time.
- LED Installation: The kit contains 37 LEDs. LEDs are polarized; ensure the longer lead (anode) matches the positive (+) marking on the PCB, and the shorter lead (cathode) matches the negative (-) marking. Solder one lead of each LED first. To ensure they are straight, you can reheat the soldered lead and adjust the LED's position before soldering the second lead. Avoid applying heat to any LED for more than 2 seconds to prevent damage.
- Other Components: Install and solder other components such as capacitors, transistors, diodes, and integrated circuits (ICs). Pay close attention to polarity for diodes and electrolytic capacitors, and the notch/dot orientation for ICs.
- Pushbutton and Battery Holder: Solder the pushbutton and the battery holder wires to their designated pads on the PCB. Ensure secure connections.
- Final Inspection: After all components are soldered, carefully inspect the entire PCB for any cold solder joints, solder bridges (short circuits), or incorrectly oriented components. Trim any excessively long component leads.

This image shows the fully assembled Velleman MK119 Roulette Kit, displaying its circular arrangement of 37 LEDs, ready for operation.
Operating Instructions
- Power Supply: Insert 3 AA batteries (not included) into the battery holder, ensuring correct polarity.
- Start Spin: Press and hold the pushbutton. The LEDs will begin to spin rapidly, accompanied by a spinning sound.
- Stop Spin: Release the pushbutton. The LEDs will gradually slow down and stop on a randomly selected LED. A 'winner' tune will play for the selected color.
- Auto Power-Off: The device features an auto power-off function to conserve battery life after a period of inactivity.
Maintenance
- Keep the assembled kit clean and dry. Avoid exposure to moisture or extreme temperatures.
- Replace batteries when the LED brightness diminishes or the device stops functioning correctly. Always use fresh, good-quality AA batteries.
- Handle the kit with care to prevent damage to the soldered connections or components.
- If storing for an extended period, remove the batteries to prevent leakage.
Troubleshooting
- Kit does not power on:
- Check if batteries are inserted correctly with the right polarity.
- Ensure batteries are fresh and fully charged.
- Inspect the battery holder connections and wires for secure soldering.
- Verify the main power connections on the PCB.
- LEDs not lighting or lighting incorrectly:
- Check the polarity of all LEDs. Incorrectly installed LEDs will not light.
- Inspect all LED solder joints for cold joints or short circuits.
- Ensure no component leads are touching where they shouldn't.
- Incorrect spinning behavior or no sound:
- Re-check all component orientations, especially for the microprocessor and transistors.
- Verify all solder connections for the sound components and the microprocessor.
- Ensure there are no solder bridges on the IC pins.
- Missing components: If you find components missing from your kit, please contact Velleman customer support directly.
Specifications
| Feature | Detail |
| Model Number | MK119 |
| Power Supply | 3 x AA batteries (not included) |
| LEDs | 37 LEDs |
| Dimensions (assembled) | Ø3.6 x 1.3 inches (approximate) |
| Features | Spinning sound, 'winner'-tune, pushbutton operation, microprocessor technology, auto power-off, low power consumption |
| Item Weight (packaged) | 2.4 ounces |
| Product Dimensions (packaged) | 6 x 5.2 x 1.5 inches |
Support
For technical assistance, inquiries regarding missing parts, or further information about the Velleman MK119 Roulette Kit, please refer to the official Velleman website or contact their customer support directly. Please have your product model number (MK119) ready when contacting support.