Introduction
This manual provides essential instructions for the safe and efficient operation of your Hiland HLDS032-BB Portable Table Top Patio Heater. This 38-inch tall patio heater is designed to provide 11,000 BTUs of heat output, utilizing either a 1lb or 20lb propane tank (adapter hose for 20lb tank not included). It features adjustable control, a weight plate for stability, a burner screen guard, and built-in thermocouple and anti-tilt safety devices.
Important Safety Information
- Local Regulations: Always check your local laws and regulations before purchasing or operating this product.
- Outdoor Use Only: This patio heater is designed and approved for outdoor use only. Do not operate indoors or in enclosed spaces.
- Clearance: Maintain adequate clearance from combustible materials. Refer to product labels for specific distances.
- Stability: The heater includes a weight plate for added stability. Ensure the heater is placed on a firm, level surface to prevent tipping.
- Hot Surfaces: The burner screen guard is present to prevent burns, but all metal surfaces become extremely hot during operation and remain hot for some time after shutdown. Avoid touching hot surfaces.
- Propane Gas: Use only propane gas. Ensure proper connection of the propane tank (1lb or 20lb with adapter hose, not included).
- Safety Devices: This heater is equipped with a thermocouple and anti-tilt safety devices that will automatically shut off the gas supply if the pilot light goes out or the heater tips over.
Setup and Assembly
Carefully unpack all components and ensure all parts are present before beginning assembly. Follow the manufacturer's instructions provided with the product for detailed assembly steps. The following images illustrate key components and their functions during setup:
Figure 1: Easy Access Door. This image shows the side of the heater with an open door, revealing the compartment where the propane tank is installed. This design allows for convenient placement and removal of the propane cylinder.
Figure 2: Tilting Regulator. A close-up view of the tilting regulator mechanism, designed to simplify the connection of the propane tank. The tank can be angled into position for easier attachment to the regulator.
Figure 3: Heavy Weight Plate. This image displays the heavy weight plate located at the base of the heater, which significantly enhances stability and reduces the risk of accidental tipping.
Propane Tank Installation:
- Ensure the heater is turned off and cool.
- Open the easy access door at the base of the heater.
- Carefully place the 1lb propane tank (or 20lb tank with adapter hose) into the compartment.
- Connect the tilting regulator to the propane tank valve. Tighten securely by hand.
- Close the access door.
Operating Instructions
This section details how to safely ignite and operate your patio heater.
Igniting the Heater:
- Ensure the propane tank valve is fully open.
- Locate the control knob and igniter button on the heater's body.
- Push and turn the control knob to the "PILOT" position. Hold it in for 30-60 seconds to allow gas to flow.
- While still holding the control knob in, press the igniter button repeatedly until the pilot flame lights. You may need to press it several times.
- Once the pilot is lit, continue to hold the control knob in for another 10-15 seconds to ensure the thermocouple is heated and holds the pilot.
- Release the control knob. The pilot should remain lit.
- Turn the control knob to the desired heat setting (LOW to HIGH). The main burner will ignite.
Figure 4: Protective Heat Screen. A close-up of the burner area, showing the protective metal screen designed to prevent direct contact with the hot heating element and reduce burn risks.
Adjusting Heat Output:
- Rotate the control knob between the "LOW" and "HIGH" settings to adjust the heat output as desired.
- The heater provides up to 11,000 BTUs of heat.
Shutting Down the Heater:
- Turn the control knob to the "OFF" position.
- Close the valve on the propane tank when the heater is not in use.
Maintenance
- Cleaning: Ensure the heater is completely cool before cleaning. Wipe exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners.
- Storage: When not in use, especially during off-season, disconnect the propane tank and store the heater in a dry, protected area.
- Gas Supply: Always turn off the gas supply at the propane tank when the heater is not in operation.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater will not light. | No gas flow; igniter not sparking; pilot light not holding. | Ensure propane tank valve is fully open. Check igniter for spark. Hold control knob in longer after pilot lights to heat thermocouple. |
| Heater shuts off unexpectedly. | Anti-tilt device activated; thermocouple issue; low gas pressure. | Ensure heater is on a stable, level surface. Check propane tank level. If problem persists, contact customer support. |
| Insufficient heat output. | Low gas setting; low propane level. | Adjust control knob to a higher setting. Check propane tank level and replace if empty. |
Specifications
- Brand: Hiland
- Model Number: HLDS032-BB
- Color: Hammered Bronze
- Heat Output: 11,000 BTUs
- Fuel Type: Propane (1lb or 20lb tank)
- Product Dimensions: 21"D x 21"W x 38"H
- Indoor/Outdoor Usage: Outdoor Only
- Special Features: Portable, Adjustable Control, Burner Screen Guard, Thermocouple, Anti-Tilt Safety Devices
- Manufacturer: AZ Patio Heaters LLC
- CSA Approved: Yes
Warranty and Support
All AZ Patio Heaters products include a one-year warranty against manufacturer defects. For warranty claims, replacement parts, or service inquiries, please contact AZ Patio Heaters LLC directly. They maintain a complete line of replacement parts and a full-service repair center.
Product Overview Video
This video provides a general overview of AZ Patio Heaters products, demonstrating features and functionality relevant to the Hiland HLDS032-BB model. It showcases the design and operational aspects of a patio heater.
