SABRE 2-in-1 Stun Gun and Flashlight User Manual

Introduction

This manual provides essential information for the safe and effective use of your SABRE 2-in-1 Stun Gun and Flashlight. Please read all instructions carefully before operation and retain this manual for future reference.

Safety Information

WARNING: This product is intended for self-defense purposes only. Misuse may result in serious injury or death. Keep out of reach of children. Check local laws and regulations regarding the possession and use of stun guns.

Proposition 65 Warning:

WARNING: This product can expose you to lead and phthalates, which is known to the State of California to cause cancer, birth defects, and reproductive harm. For more information go to www.P65Warnings.ca.gov.

• Do not use on individuals with pacemakers or other medical conditions.
• Avoid contact with the head, neck, or heart area.
• Do not use in flammable environments.
• Ensure the safety switch is engaged when not in use.
• This device is not a toy.

Product Features

• Extreme Stopping Power: Delivers a painful 1.60 µC (Microcoulombs) charge.
• Bright LED Flashlight: 120-lumen LED flashlight for illumination.
• Compact Design: Easy to hold with a rubberized grip.
• Rechargeable Battery: Built-in rechargeable battery with included USB charging cord.
• Safety Switch: Prevents accidental discharge.
• Belt Holster: For convenient and discreet carrying.

Figure 1: Key features of the SABRE S-1005 Stun Gun, including its compact design, 1.60 µC charge, 120 lumen LED light, safety switch, rechargeable battery, and included belt holster. Product dimensions are 4.2 x 1 x 0.6 inches.

Figure 2: Chart illustrating stun gun strength based on microCoulombs (µC). This model delivers 1.60 µC, which is in the Level III range (1.0-2.0 µC), indicating "intolerable pain."

Setup

Charging the Device

Your SABRE Stun Gun comes with a built-in rechargeable battery. Before first use, fully charge the device.

1. Locate the charging port on the device.
2. Connect the included USB charging cord to the stun gun.
3. Plug the other end of the USB cord into a compatible USB power adapter (not included) or a computer USB port.
4. The charging indicator light will illuminate (typically red) during charging.
5. Once fully charged, the indicator light may change color (e.g., green) or turn off. Disconnect the device from the charger.

A full charge typically takes several hours. Do not overcharge the device.

Operating Instructions

Using the Flashlight

To activate the 120-lumen LED flashlight:

• Slide the safety switch to the "ON" position (usually indicated by a green or white marker).
• Press the flashlight button (often located on the side or top) to turn the light on or off.

Using the Stun Gun

The stun gun feature should only be used in self-defense situations when faced with an immediate threat. Familiarize yourself with its operation in a safe environment.

1. Ensure the device is fully charged.
2. Remove the stun gun from its belt holster for quick access.
3. Slide the safety switch to the "ON" position. This will typically reveal a red indicator light, signifying it is ready for use.
4. Press and hold the activation button (often a separate button from the flashlight button).
5. Immediately make direct contact with the attacker's body. Aim for large muscle groups or areas that are not easily protected, such as the shoulder, hip, or thigh.
6. Maintain contact for 3-5 seconds for maximum effect.
7. After use, immediately slide the safety switch back to the "OFF" position to prevent accidental discharge.

Figure 3: Visual guide on how to use the SABRE stun gun: 1. Remove from belt holster. 2. Turn off safety switch (meaning slide to ON position). 3. Press button and make contact with attacker.

Note: The sound of the stun gun alone may be enough to deter an attacker. However, direct contact is necessary for the device to be effective.

Maintenance

• Keep the device clean and dry. Wipe with a soft, damp cloth if necessary.
• Do not use abrasive cleaners or solvents.
• Regularly check the charging port and electrodes for any debris or damage.
• Store in a cool, dry place, away from extreme temperatures and direct sunlight.
• Periodically test the device (in a safe manner, away from people and animals) to ensure it is functioning correctly and the battery holds a charge.

Troubleshooting

If you experience issues not listed here, please contact SABRE customer support.

Specifications

Figure 4: Dimensions of the SABRE S-1005 Stun Gun, showing its length as 9.5 inches and width as 5 inches.

Warranty and Support

Warranty Information

Your SABRE 2-in-1 Stun Gun and Flashlight is covered by a 2-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, abuse, accident, unauthorized modification, or normal wear and tear.

For warranty claims, please retain your proof of purchase and contact SABRE customer support.

Customer Support

For technical assistance, troubleshooting, or general inquiries, please visit the official SABRE website or contact their customer support team.

• Official Website: www.sabrered.com
• Training Videos: Packaging includes links to free training videos to help you prepare to use your SABRE Stun Gun effectively.