Product Overview
The Hosa SKT-415Q Pro Speaker Cable is engineered for reliable audio signal transmission between loudspeakers and amplifiers. Featuring REAN Loudspeaker (Speakon-compatible) and 1/4 inch TS connectors, this 15-foot (4.5m) cable is built with high-quality components to ensure dependable service and exceptional value in professional audio environments.
Figure 1: The Hosa SKT-415Q Pro Speaker Cable, illustrating its overall length and the distinct Speakon-compatible and 1/4 inch TS connectors.
What's in the Box
Your Hosa SKT-415Q Pro Speaker Cable package includes:
- One (1) Hosa SKT-415Q Speaker Cable (Speakon-compatible to 1/4-Inch TS, 15 Feet / 4.5m)
Setup Instructions
Follow these steps to properly connect your Hosa SKT-415Q Pro Speaker Cable:
- Identify Connectors: Locate the REAN Loudspeaker (Speakon-compatible) connector and the 1/4 inch TS (Tip-Sleeve) connector on the cable. The Speakon-compatible connector is typically larger and features a locking mechanism, while the 1/4 inch TS connector is a standard audio jack.
- Connect to Loudspeaker: Insert the REAN Loudspeaker (Speakon-compatible) connector into the corresponding Speakon input on your loudspeaker. Twist the connector clockwise until it locks securely into place. Ensure a firm connection to prevent signal loss.
- Connect to Amplifier/Mixer: Insert the 1/4 inch TS connector into the speaker output jack of your amplifier, power mixer, or audio interface. Ensure it is fully inserted for proper contact.
- Secure Cable Run: Route the cable safely, avoiding tripping hazards and areas where it might be pinched or excessively bent. Use cable ties or wraps if necessary to keep the setup tidy and secure.
- Power On: Once all connections are secure, you may power on your audio equipment.
Figure 2: Detailed view of the Speakon-compatible and 1/4 inch TS connectors, highlighting their design for secure and reliable audio connections.
Operating Instructions
The Hosa SKT-415Q Pro Speaker Cable is designed for straightforward operation. Once properly connected as described in the "Setup Instructions" section, the cable facilitates the transmission of audio signals from your amplifier or power mixer to your loudspeaker.
- Ensure both ends of the cable are securely connected to their respective ports before powering on any audio equipment.
- Verify that the amplifier's output impedance matches the loudspeaker's impedance for optimal performance and to prevent damage.
- Adjust volume levels on your amplifier or mixer gradually to avoid sudden loud noises or potential damage to your speakers.
- Always power down your amplifier before connecting or disconnecting speaker cables to prevent electrical surges or damage to components.
Maintenance
Proper maintenance extends the life and performance of your Hosa SKT-415Q Pro Speaker Cable:
- Cleaning: Wipe the cable jacket with a soft, dry cloth to remove dust and dirt. Avoid using harsh chemicals or abrasive cleaners.
- Storage: When not in use, coil the cable loosely in a figure-eight pattern to prevent kinks and tangles. Avoid tight coiling, which can stress the internal conductors. Store in a cool, dry place away from direct sunlight and extreme temperatures.
- Handling: Always grasp the connectors, not the cable itself, when plugging or unplugging. Avoid pulling, twisting, or bending the cable sharply, especially near the connectors.
- Inspection: Periodically inspect the cable and connectors for any signs of wear, damage, or corrosion. If damage is observed, replace the cable to ensure safety and optimal audio quality.
Troubleshooting
If you experience issues with your Hosa SKT-415Q Pro Speaker Cable, consider the following troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound from loudspeaker |
|
|
| Intermittent sound or crackling |
|
|
| Humming or buzzing noise |
|
|
Specifications
| Feature | Detail |
|---|---|
| Product Name | Hosa SKT-415Q Pro Speaker Cable |
| Model Number | SKT-415Q |
| Brand | Hosa |
| Connectors | REAN Loudspeaker (Speakon-compatible) to 1/4 inch TS |
| Cable Length | 15 feet (4.5 meters) |
| Gauge | 14 AWG (American Wire Gauge) |
| Color | Black |
| Product Dimensions | 1 x 1 x 1 inches (approximate packaging dimensions) |
| Item Weight | 1.4 Pounds |
| Manufacturer | Hosa |
Warranty and Support
Hosa Technology products are designed for durability and performance. For specific warranty information, please refer to the warranty card included with your purchase or visit the official Hosa Technology website. For technical support, product inquiries, or assistance with troubleshooting beyond this manual, please contact Hosa customer service directly.
Hosa Technology Official Website: https://hosatech.com/
