BLACK+DECKER 12V Cordless Impact Driver SX5120 User Manual

Introduction

The BLACK+DECKER 12V Cordless Impact Driver SX5120 is a versatile power tool designed for efficient and comfortable use in various DIY and light professional applications. Its impact mechanism allows for quick and powerful tightening of screws and bolts, making it ideal for tasks such as assembling furniture, building wood decks, and other fastening projects. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your impact driver.

Image: The BLACK+DECKER 12V Cordless Impact Driver SX5120, showcasing its compact design and ergonomic grip.

Important Safety Information

Always observe basic safety precautions when using electric tools to reduce the risk of fire, electric shock, and personal injury. Read and understand all instructions before operating this tool.

• Wear Eye Protection: Always wear safety goggles or safety glasses with side shields.
• Wear Hearing Protection: Prolonged use may require hearing protection.
• Keep Work Area Clean: Cluttered areas and benches invite injuries.
• Avoid Dangerous Environments: Do not use power tools in damp or wet locations, or expose them to rain.
• Keep Children Away: All visitors should be kept at a safe distance from the work area.
• Dress Properly: Do not wear loose clothing or jewelry. Contain long hair.
• Secure Workpiece: Use clamps or a vise to hold work. It is safer than using your hand and it frees both hands to operate the tool.
• Do Not Overreach: Keep proper footing and balance at all times.
• Disconnect Tools: Disconnect the tool from the power source before making adjustments, changing accessories, or storing.
• Use Right Tool: Do not force small tool or attachment to do the job of a heavy-duty tool.
• Maintain Tools With Care: Keep tools sharp and clean for better and safer performance. Follow instructions for lubricating and changing accessories.

Package Contents

Verify that all items listed below are included in your package. If any items are missing or damaged, please contact customer support.

• BLACK+DECKER 12V Cordless Impact Driver SX5120 Unit
• 12V Slide-Type Rechargeable Battery (x2)
• Rapid Charger
• Tool Box
• #2 Double-Ended Bit

Image: The impact driver shown with its two batteries, charger, and bit, all neatly stored in the included tool box.

Setup

1. Charging the Battery

1. Connect the rapid charger to a standard electrical outlet.
2. Slide a 12V rechargeable battery onto the charger until it clicks into place.
3. Allow approximately 30 minutes for a full charge. The charger's indicator light will change to show charging status.
4. Once charged, remove the battery from the charger. Do not leave batteries on the charger indefinitely.

2. Installing/Removing the Bit

1. Ensure the impact driver is switched off and the battery is removed before changing bits.
2. Pull the chuck collar forward to unlock the bit holder.
3. Insert the desired bit (e.g., the #2 double-ended bit) into the bit holder until it is fully seated.
4. Release the chuck collar. The bit should be securely held. Gently pull on the bit to confirm it is locked.
5. To remove, pull the chuck collar forward and pull the bit out.

Image: A detailed view of the impact driver's chuck, illustrating where to insert the bit.

Operating Instructions

1. Attaching the Battery

• Align the charged battery with the base of the impact driver.
• Slide the battery into place until it clicks securely.
• To remove, press the release button on the battery and slide it off.

2. Powering On/Off and Speed Control

• To turn the tool ON, press the trigger switch. The tool speed increases as you increase pressure on the trigger.
• To turn the tool OFF, release the trigger switch.

3. Forward/Reverse Rotation

• The forward/reverse button is located above the trigger.
• Push the button to the left for forward rotation (tightening screws).
• Push the button to the right for reverse rotation (loosening screws).
• When the button is in the center position, the trigger is locked, preventing accidental operation. Always engage the lock when not in use or when changing bits.

4. Using the Impact Driver

• Place the bit onto the head of the screw or bolt.
• Apply firm, steady pressure to the tool, keeping it aligned with the fastener.
• Press the trigger to begin driving. The impact mechanism will engage automatically when resistance is met, providing additional torque.
• Release the trigger once the fastener is tightened to the desired level. Avoid over-tightening.

Maintenance

Regular maintenance ensures optimal performance and extends the life of your tool.

• Cleaning: Keep the tool's ventilation openings clear and free of debris. Use a soft, damp cloth to clean the exterior. Do not use harsh chemicals or abrasive cleaners.
• Battery Care: Store batteries in a cool, dry place away from direct sunlight. Do not store fully discharged batteries for extended periods. Charge them periodically if not in use.
• Bit Maintenance: Inspect bits regularly for wear or damage. Replace worn bits to ensure efficient and safe operation.
• Storage: When not in use, store the impact driver and its accessories in the provided tool box, in a dry, secure location out of reach of children.

Troubleshooting

Specifications

Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official BLACK+DECKER website. Keep your purchase receipt as proof of purchase for warranty claims.

Online Support: www.blackanddecker.com/support