Introduction
Welcome to the CLOCKY Extra Loud Alarm Clock user manual. This guide provides essential information for setting up, operating, and maintaining your CLOCKY alarm clock, designed specifically for heavy sleepers. Its unique features ensure you get out of bed on time by rolling away and sounding a loud alarm.
Key Features
- Runaway Alarm Clock: Jumps from your bedside and runs away to ensure you get up.
- Extra Loud Alarm: Designed for heavy sleepers with a super loud digital alarm.
- Wheeled Movement: Features wheels that allow it to roll and move, forcing you to chase it.
- Snooze Option: Offers a single snooze option before it runs away, or can be set to no snooze.
- Easy to Set: Simple controls for setting time and alarm.
- Durable Design: Made from plastic, built to withstand drops from a nightstand.
Setup Guide
1. Battery Installation
The CLOCKY alarm clock requires 4 AAA batteries (not included). To install:
- Locate the battery compartment on the underside of the clock.
- Use a small screwdriver to open the battery compartment cover.
- Insert 4 AAA batteries, ensuring correct polarity (+/-).
- Replace the battery compartment cover and secure it with the screw.
Image: A hand inserting AAA batteries into the battery compartment of a light blue Clocky alarm clock. The compartment is located on the underside of the clock, between its two large wheels.
2. Setting the Time
To set the current time on your CLOCKY:
- Press the 'T' (Time) button located on the top of the clock. The time display will start flashing.
- Use the 'H' (Hour) button to adjust the hour.
- Use the 'M' (Minute) button to adjust the minutes.
- Press the 'T' button again to confirm and save the time.
Image: A hand pressing buttons on the top of a black Clocky alarm clock to set the time. The digital display shows "6:30".
3. Setting the Alarm
To set your wake-up alarm:
- Press the 'A' (Alarm) button located on the top of the clock. The alarm time display will start flashing.
- Use the 'H' (Hour) button to adjust the alarm hour.
- Use the 'M' (Minute) button to adjust the alarm minutes.
- Press the 'A' button again to confirm and save the alarm time.
Operating Your CLOCKY
1. Activating the Alarm and Movement
CLOCKY offers different modes for its alarm and movement:
- Alarm Only: To use CLOCKY as a stationary alarm clock, ensure the wheels icon button is not activated. The alarm will sound without the clock moving.
- Alarm with Movement: To activate the runaway feature, press the button with the wheels icon. When the alarm sounds, CLOCKY will jump from your nightstand (if placed on one) and roll around, forcing you to get out of bed to turn it off.
Image: A black Clocky alarm clock with white wheels displayed in front of its brown and black packaging box. The clock's digital display shows "6:30".
2. Snooze Function
CLOCKY allows for a single snooze. When the alarm sounds, press the large "Snooze" button on top. The alarm will temporarily stop and then resume after a short period, at which point CLOCKY will begin to roll away if the movement feature is activated.
Image: A hand reaching towards the top of a black Clocky alarm clock, seemingly to press the snooze button. The clock is on a surface, and its digital display shows "6:30".
3. Alarm Sound
The alarm sound is designed to be loud and attention-grabbing, featuring an R2D2-like sound to ensure heavy sleepers wake up. There is no volume control for the alarm sound.
Image: A black Clocky alarm clock on a white surface, with three circular icons above it. The icons represent "LOUD ALARM" (bell), "JUMPS RUNS" (two circles with a line), and "EASY SET UP" (a checkmark). The clock's digital display shows "6:30".
4. Movement in Action
When the movement feature is active, CLOCKY will roll off surfaces up to 3 feet high and navigate around obstacles. This ensures you physically engage with the alarm to turn it off, promoting wakefulness.
Image: A black Clocky alarm clock on a rug next to a bed, with text overlay stating "Clocky is the only alarm clock that forces you up. You'll get out of bed to chase his loud alarm."
Maintenance
1. Cleaning
Wipe the CLOCKY alarm clock with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.
2. Battery Replacement
Replace batteries when the display dims or the alarm sound weakens. Follow the battery installation steps in the Setup Guide.
Troubleshooting
| Problem | Solution |
|---|---|
| CLOCKY does not move. | Ensure the wheels icon button is activated. Check battery levels. Ensure CLOCKY is on a flat surface from which it can roll. |
| Alarm is not sounding. | Verify the alarm time is set correctly and the alarm is activated (bell icon). Check battery levels. |
| Time display is dim or blank. | Replace all 4 AAA batteries. |
| CLOCKY rolls off too quickly. | The snooze function allows for a brief delay. If you prefer no movement, deactivate the wheels icon. |
Specifications
- Brand: CLOCKY
- Model: CLKYb
- Color: Black
- Display Type: LED
- Power Source: 4 AAA batteries (not included)
- Product Dimensions: 3.5"W x 3.5"H
- Material: Plastic
- Special Features: Loud Alarm, Snooze, Runs away, Super loud alarm clock for heavy sleepers on wheels
Warranty and Support
CLOCKY products come with a 90-day limited warranty. For warranty claims or technical support, please visit the official CLOCKY website or contact their customer service directly.
