Turtle Wax T-319 Black Spray Detailer User Manual

Product Overview

The Turtle Wax T-319 Black Spray Detailer is formulated with black pigments to help conceal minor surface imperfections and synthetic carrier oils for superior lubrication. These oil additives assist in preventing incidental swirl marks caused by microscopic dirt and dust particles. This product is also suitable for use on black rubber and plastic trim, providing a deep, rich shine specifically for black finishes.

Image: Turtle Wax T-319 Black Spray Detailer in a 23 Fl Oz spray bottle.

Safety Information

• Keep out of reach of children and pets.
• Avoid contact with eyes. In case of contact, rinse thoroughly with water for several minutes.
• Do not ingest. If swallowed, seek medical attention immediately.
• Use in a well-ventilated area.
• Wear appropriate protective gloves and eyewear during application.
• Store in a cool, dry place away from direct sunlight and extreme temperatures.

Preparation

Proper preparation ensures optimal results and prevents scratching.

1. Clean the Vehicle: Wash and thoroughly dry the vehicle's surface to remove loose dirt, grime, and contaminants.
2. Work in Shade: For best results, apply the detailer in a shaded area and ensure the vehicle's surface is cool to the touch. Avoid direct sunlight, which can cause the product to dry too quickly and lead to streaking.
3. Gather Supplies: Have several clean, soft microfiber towels ready for application and buffing.

Application Instructions

Follow these steps for effective application of the Turtle Wax T-319 Black Spray Detailer:

1. Shake Well: Shake the bottle thoroughly before each use to ensure the black pigments and oils are evenly mixed.
2. Apply to a Small Section: Work on one section of the vehicle at a time (e.g., a door panel, half a hood) to prevent the product from drying prematurely.
3. Spray Application: Lightly mist the product directly onto the vehicle's surface or onto a clean microfiber towel.
4. Spread Evenly: Using the microfiber towel, gently spread the detailer over the surface in a back-and-forth motion.
5. Buff to a Shine: Immediately, or after a very short haze forms, use a separate clean, dry microfiber towel to buff the area to a brilliant, streak-free shine.
6. Repeat: Continue this process section by section until the entire vehicle's black painted surfaces are treated.
7. Trim Application: For black rubber and plastic trim, spray a small amount onto a microfiber towel and wipe onto the trim, then buff with a clean, dry section of the towel.

Maintenance

Regular use of the Turtle Wax T-319 Black Spray Detailer will help maintain the deep, rich appearance of your black paint and provide ongoing protection.

• For best results, apply after washing your vehicle or for quick touch-ups between washes.
• Frequent application can build up layers of protection and enhance the depth of color.
• Always use clean microfiber towels to avoid introducing new scratches or swirl marks.

Troubleshooting

• Streaking: If streaking occurs, it may be due to applying too much product, working in direct sunlight, or not buffing quickly enough. Re-wipe the affected area with a clean, dry microfiber towel. If streaks persist, lightly re-apply the detailer and buff immediately.
• Uneven Application: Ensure the product is spread evenly across the surface. If an area appears uneven, re-apply and buff thoroughly.
• Product Residue: If any residue remains, use a fresh, clean microfiber towel to buff until clear.

Specifications

Warranty and Support

The Turtle Wax T-319 Black Spray Detailer comes with a LIMITED WARRANTY. For specific details regarding warranty coverage, terms, and conditions, please refer to the product packaging or contact Turtle Wax customer support directly.

For further assistance, product inquiries, or technical support, please visit the official Turtle Wax website or contact their customer service department through the contact information provided on their website or product packaging.