Hollywood Racks Bike Adapter Pro Instruction Manual

1. Introduction

The Hollywood Racks Bike Adapter Pro is designed to facilitate the transport of bicycles with non-traditional frames, such as women's bikes, kids' bikes, and bikes with sloping top tubes, on standard bike racks. This adapter creates an artificial top tube, ensuring secure and stable mounting for a wide range of bicycles.

2. Safety Information

• Always ensure all components of the Bike Adapter Pro are securely fastened before transporting your bicycle.
• Verify that the bicycle's seat post and handlebar stem are properly tightened to prevent movement during transport.
• Do not exceed the maximum load capacity of 80 pounds for the adapter.
• Regularly inspect the adapter for any signs of wear, damage, or corrosion. Replace damaged parts immediately.
• Ensure the bicycle does not make contact with the vehicle during transport.

3. Product Overview

3.1. What's Included

• (1) Hollywood Racks Bike Adapter Pro Bar

3.2. Key Features

• Simple Solution for Bike Transport: Allows easy transport of bicycles with a sloping top tube. Features a telescoping bar, non-twisting tubing, and a secondary interlocking gate.
• Suitable for a Variety of Bike Frames, Models and Sizes: This bike rack adapter bar extends from 21 to 28 inches and is designed to fit a wide range of bicycles, including ladies, kids, cargo, and adult bike frames.
• Simple to Use with No Tools Necessary: Our bike crossbar adapter attaches to the bike's seat post and handlebar stem post. Easy push-pin operation keeps each clamp closed. This bike frame adapter bar attaches and removes in seconds.
• Protects Your Bike from Scratches and Scrapes: Designed with premium quality materials, including rubberized coatings on the hooks, that will not scratch your bicycle's finish.
• Heavy-Duty Construction with Strong Materials: Made with alloy steel, non-twisting tubing, and a secondary interlocking gate for strength, durability, and longevity. Rust-resistant with a powder-coated black finish.

Image: Hollywood Racks Bike Adapter Pro with feature callouts.

4. Setup and Installation

4.1. Prepare the Adapter

Ensure the adapter's hooks are open by depressing the release pins on each end. This allows the hooks to expand and fit around the bicycle components.

Image: The Bike Adapter Pro in its ready-to-use state.

4.2. Attach to Bicycle Stem

Attach the larger U-hook end of the adapter to the bicycle's handlebar stem. Ensure the bolt from the quick-release pin is installed through the holes and the retainer clip is properly closed. The rubberized coating helps protect your bike's finish.

4.3. Extend and Attach to Seat Post

Extend the adapter bar to the appropriate length. Attach the smaller hook end to the bicycle's seat post. Ensure the seat post is securely tightened on the bicycle before attaching the adapter.

Image: Close-up of the adapter installed on a bicycle.

4.4. Secure the Adapter

Adjust the length of the adapter to create a snug fit between the handlebar stem and the seat post. The adapter should be firm and stable, providing a horizontal bar for mounting on a bike rack.

5. Operating Instructions

5.1. Loading Your Bicycle onto a Rack

With the Bike Adapter Pro securely installed on your bicycle, load the bicycle onto your bike rack. Position the bicycle so that its chain and gears face away from the rack to prevent damage.

Image: Bicycle with adapter mounted on a car's bike rack.

5.2. Securing the Bicycle

Use the rack's straps or securing mechanisms to firmly hold the bicycle in place. Ensure there is no contact between the bicycle and the vehicle. Double-check all connections and straps before beginning your journey.

6. Maintenance

• Regularly inspect the adapter for any signs of wear, damage, or loose components.
• Clean the adapter with a damp cloth and mild soap. Avoid harsh chemicals that could damage the finish.
• Ensure the rubberized coatings on the hooks are intact to prevent scratching your bike's finish.
• Store the adapter in a dry place when not in use.

7. Troubleshooting

7.1. Adapter is Loose on Bicycle

• Ensure both hooks are fully engaged and the quick-release pins are securely closed.
• Adjust the telescoping length of the adapter to create a tighter fit between the seat post and handlebar stem.
• Verify that the bicycle's seat post and handlebar stem are properly tightened.

7.2. Difficulty Attaching to Rack

• Confirm the adapter is installed correctly, creating a horizontal bar.
• Adjust the position of the bicycle on the rack arms to find the most stable fit.

8. Specifications

9. Warranty and Support

9.1. Warranty Information

The Hollywood Racks Bike Adapter Pro comes with a Limited Lifetime Warranty on manufacturer defects. Please retain your proof of purchase for warranty claims.

9.2. Customer Support

For further assistance or inquiries, please visit the official Hollywood Racks website or contact their customer service department.