Justrite 08217 Flame Arrestor User Manual

1. Product Overview

The Justrite 08217 Flame Arrestor is a critical safety component designed for use with the Justrite 08207 Large Steel Safety Drum Funnel. Its primary function is to prevent flashback ignition of flammable vapors during liquid transfer operations, significantly enhancing workplace safety.

This flame arrestor is constructed from durable brass and measures 6 inches in length, ensuring compatibility and effective performance when integrated with the specified safety drum funnel.

Figure 1: The Justrite 08217 Flame Arrestor, a brass cylindrical component with perforated walls designed to prevent flame propagation.

2. Safety Information

WARNING: Failure to follow these safety instructions may result in serious injury or death.

• Always ensure the flame arrestor is properly installed in the designated safety drum funnel (model 08207) before transferring flammable liquids.
• Do not use this flame arrestor with funnels or containers other than the specified Justrite 08207 Safety Drum Funnel.
• Regularly inspect the flame arrestor for any signs of damage, corrosion, or blockage. A damaged or obstructed arrestor may compromise safety.
• Ensure proper ventilation in the work area when handling flammable liquids.
• Consult local regulations and safety standards for handling and storing flammable materials.
• This product is designed to prevent flashback ignition. It does not eliminate the risk of fire or explosion if other safety precautions are ignored.

Figure 2: Justrite's commitment to safety, indicated by certifications such as FM Approved, OSHA Compliant, UL, TUV, and GS.

3. Setup and Installation

The Justrite 08217 Flame Arrestor is designed for straightforward installation into the Justrite 08207 Large Steel Safety Drum Funnel.

3.1. Required Equipment

• Justrite 08217 Flame Arrestor (included)
• Justrite 08207 Large Steel Safety Drum Funnel (sold separately)
• Appropriate personal protective equipment (PPE)

3.2. Installation Steps

1. Ensure the Justrite 08207 Safety Drum Funnel is clean and free of debris.
2. Carefully insert the 08217 Flame Arrestor into the designated opening within the funnel. The arrestor should fit snugly.
3. Verify that the flame arrestor is fully seated and stable within the funnel before use. It should not wobble or easily dislodge.
4. Once installed, the funnel with the flame arrestor can be securely attached to a 55-gallon drum or other compatible container.

Figure 3: A worker inspecting safety equipment, emphasizing the importance of proper setup and verification in industrial environments.

4. Operating Instructions

The flame arrestor operates passively by preventing flames from entering the drum during liquid transfer. Its effectiveness relies on proper installation and maintenance.

4.1. Usage with Safety Drum Funnel

1. Ensure the flame arrestor is correctly installed in the Justrite 08207 Safety Drum Funnel.
2. Position the funnel securely on the drum opening.
3. Slowly and carefully pour flammable liquids into the funnel. The flame arrestor will allow the liquid to pass while preventing any external flame or spark from igniting vapors inside the drum.
4. Avoid overfilling the drum.
5. After use, remove the funnel and secure the drum with its proper closure.

Figure 4: Illustrative image of liquid being poured into a safety container, demonstrating the flow through a funnel system.

5. Maintenance

Regular maintenance of the flame arrestor is crucial for its continued effectiveness and safety.

5.1. Inspection

• Inspect the flame arrestor before each use for any visible damage, such as dents, cracks, or corrosion.
• Check for any blockages within the perforations caused by debris, residue, or solidified liquids.
• Ensure the arrestor is securely seated in the funnel.

5.2. Cleaning

• If the flame arrestor becomes clogged or dirty, remove it from the funnel.
• Clean the arrestor using a suitable solvent that is compatible with brass and the type of liquid previously handled.
• Use a soft brush or cloth to gently remove any residue from the perforations. Do not use abrasive materials that could damage the brass.
• Rinse thoroughly and allow to dry completely before reinstallation.

5.3. Replacement

Replace the flame arrestor immediately if any damage is observed, if it cannot be thoroughly cleaned, or if there is any doubt about its integrity. A compromised flame arrestor can pose a significant safety risk.

6. Troubleshooting

This section addresses common issues that may arise with the Justrite 08217 Flame Arrestor.

7. Specifications

• Model Number: 08217
• Product Type: Flame Arrestor
• Material: Brass
• Dimensions: 7 x 3 x 3 inches (Product); 18.034 cm L x 8.636 cm W x 8.382 cm H (Package)
• Weight: 8.11 ounces
• Compatibility: Designed for Justrite 08207 Large Steel Safety Drum Funnel
• Manufacturer: Justrite Manufacturing
• Country of Origin: United States
• UPC: 697841001312

8. Warranty and Support

For specific warranty information regarding the Justrite 08217 Flame Arrestor, please refer to the documentation provided with your Justrite 08207 Safety Drum Funnel or visit the official Justrite website. Warranty terms typically cover manufacturing defects under normal use.

For technical support, replacement parts, or further inquiries, please contact Justrite customer service through their official channels. Always provide the model number (08217) when seeking support.

Justrite Official Website: www.justrite.com

Figure 5: Justrite Safety Group, a family of industrial safety companies, indicating a broad commitment to safety solutions.