1. Introduction
Thank you for choosing the Comelit Genius Intercom Monitor. This manual provides detailed instructions for the installation, operation, and maintenance of your new intercom system component. Please read this manual thoroughly before use to ensure proper functionality and safety.
The Comelit Genius monitor features a 4-inch black and white screen, a glossy white finish, and intuitive controls for door opening and call volume adjustment. It is designed for seamless integration into your existing Comelit intercom system.
2. Safety Instructions
Always adhere to the following safety guidelines to prevent damage to the device or injury to yourself:
- Electrical Safety: Installation must be performed by qualified personnel in accordance with local electrical codes and regulations. Ensure power is disconnected before any installation or maintenance.
- Environment: Do not expose the monitor to extreme temperatures, direct sunlight, high humidity, or corrosive environments. Keep away from water and other liquids.
- Handling: Handle the device with care. Avoid dropping or subjecting it to strong impacts.
- Cleaning: Use a soft, dry cloth for cleaning. Do not use abrasive cleaners, solvents, or aerosol sprays.
- Modifications: Do not attempt to open, disassemble, or modify the monitor. This will void the warranty and may cause damage or injury.
- Children: Keep the device out of reach of children to prevent accidental damage or misuse.
3. Package Contents
Please check the package for the following items:
- Comelit Genius Intercom Monitor (Model 5801)
- Handset with coiled cord
- User Manual (this document)
Note: The mounting bracket (Comelit Art. 5814 C) is required for operation and is sold separately. If converting to a desktop version, Art. 5712 is also sold separately.
4. Setup and Installation
The Comelit Genius monitor is designed for wired installation. Professional installation is highly recommended.
4.1 Wall Mounting
- Prepare the Location: Choose a suitable indoor location, away from direct sunlight, heat sources, and moisture. Ensure there is adequate space for wiring.
- Disconnect Power: Before beginning any wiring, ensure that the main power supply to the intercom system is completely disconnected at the circuit breaker.
- Install Mounting Bracket: Securely attach the Comelit mounting bracket (Art. 5814 C, sold separately) to the wall using appropriate screws and anchors. Ensure it is level and firmly fixed.
- Connect Wiring: Carefully connect the intercom system wires to the terminals on the monitor, following the wiring diagram provided with your specific intercom system's main unit. Pay close attention to polarity.
- Mount the Monitor: Align the monitor with the installed mounting bracket and gently push it into place until it clicks securely.
- Connect Handset: Plug the coiled cord of the handset into the designated port on the monitor.
- Restore Power: Once all connections are secure and the monitor is mounted, restore power to the intercom system.
4.2 Desktop Conversion (Optional)
The Comelit Genius monitor can be converted for desktop use with the optional desktop conversion kit (Comelit Art. 5712, sold separately). Follow the instructions provided with the conversion kit for proper assembly.
Figure 4.1: Front view of the Comelit Genius Intercom Monitor, showing the 4-inch black and white screen, handset, and control buttons. The monitor is glossy white.
Figure 4.2: Angled view of the Comelit Genius Intercom Monitor, highlighting its sleek design and the integrated handset. The screen displays a black and white image.
5. Operation
This section describes the basic functions of your Comelit Genius Intercom Monitor.
5.1 Receiving a Call
- When someone calls from the outdoor unit, the monitor will ring, and the screen will display the caller's image (if your outdoor unit supports video).
- Lift the handset to answer the call and begin communication.
5.2 Opening the Door
- During a call, or when viewing the outdoor unit, press the blue door opener button to unlock the door or gate.
5.3 Adjusting Call Volume
- The monitor features a selector switch for adjusting the call volume. This switch typically has three positions: High, Medium, and Low.
- Move the switch to your desired volume level.
5.4 Adjusting Brightness
- An adjustment dial is available on the monitor to control the brightness of the 4-inch screen.
- Rotate the dial to increase or decrease the screen brightness as needed for optimal viewing.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your Comelit Genius Intercom Monitor.
6.1 Cleaning
- Exterior: Wipe the exterior of the monitor with a soft, dry, lint-free cloth. For stubborn marks, slightly dampen the cloth with water, then wipe dry immediately.
- Screen: Gently wipe the screen with a soft, dry microfiber cloth. Do not press hard on the screen.
- Avoid: Do not use abrasive cleaners, solvents, alcohol, ammonia-based cleaners, or aerosol sprays, as these can damage the plastic and screen.
6.2 General Care
- Ensure the handset cord is not tangled or stretched excessively, which could damage the internal wiring.
- Periodically check all connections to ensure they are secure, especially if the unit has been moved or subjected to vibrations.
7. Troubleshooting
If you encounter issues with your Comelit Genius Intercom Monitor, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No image on screen / Screen is black. | No power; loose connection; brightness set too low; issue with outdoor unit camera. | Check power supply to the system. Ensure all wiring connections are secure. Adjust the brightness dial. Verify the outdoor unit camera is functioning. |
| No sound from handset / Cannot hear caller. | Handset not properly connected; volume set too low; issue with outdoor unit microphone/speaker. | Ensure handset cord is fully plugged in. Adjust call volume using the selector switch. Check the outdoor unit for issues. |
| Monitor not ringing. | Call volume set to low or mute; issue with outdoor unit call button. | Adjust call volume using the selector switch. Test the outdoor unit's call button. |
| Door opener button not working. | Wiring issue to door strike; issue with door strike itself; system not in active call state. | Verify wiring to the door strike. Test the door strike independently if possible. Ensure you are in an active call or viewing the outdoor unit. |
If the problem persists after trying these solutions, please contact Comelit customer support or a qualified technician.
8. Specifications
Technical specifications for the Comelit Genius Intercom Monitor (Model 5801):
- Model: 5801
- Screen: 4-inch Black/White (B/W)
- Color: Glossy White
- Material: Plastic
- Power Type: Wired
- Dimensions (H x W x D): 22.5 x 20.4 x 6.3 cm (8.86 x 8.03 x 2.48 inches)
- Weight: 830 grams (1.83 lbs)
- Features: Door opener button (blue), two grey function buttons, brightness adjustment dial, 3-position call volume selector (High, Medium, Low).
- Required for Operation: Mounting bracket Art. 5814 C (sold separately)
- Optional Accessory: Desktop conversion kit Art. 5712 (sold separately)
- GTIN: 08023903167771
9. Warranty and Support
For specific warranty information, please refer to the warranty card included with your product or visit the official Comelit website. Warranty terms may vary by region and product.
For technical support, spare parts, or service inquiries, please contact Comelit customer service through their official channels. You can typically find contact information on the Comelit website or on the product packaging.
Comelit Official Website: www.comelitgroup.com
