Introduction
This manual provides essential information for the installation, operation, and maintenance of your BLANCO Elipso-S II 514853 low-pressure kitchen faucet. Please read these instructions carefully before installation and use to ensure proper function and longevity of the product.
The BLANCO Elipso-S II is a single-lever mixer designed for low-pressure water systems, featuring a pull-out spray with two jet types and a 115° swivel spout for enhanced functionality in your kitchen.
Safety Information
- Always turn off the main water supply before attempting any installation or maintenance.
- Ensure all connections are secure to prevent leaks.
- If you are unsure about any step, consult a qualified plumber.
- Do not use abrasive cleaners or harsh chemicals on the faucet's surface.
Package Contents
Verify that all components are present before beginning installation:
- 1 x BLANCO Elipso-S II Low-Pressure Kitchen Faucet
- 1 x Pull-out spray with diverter function
- 1 x Stability plate
- 2 x Flexible connection hoses (450 mm length)
- Installation hardware (nuts, washers, seals)
- Detailed installation instructions (provided separately with the product)
Setup and Installation
The BLANCO Elipso-S II faucet is designed for single-hole installation in low-pressure water systems. For detailed, step-by-step instructions, please refer to the specific installation guide included in your product packaging. The following provides a general overview and important considerations:
- Preparation: Ensure the mounting surface is clean and free of debris. Turn off the main water supply.
- Mounting: Insert the faucet into the single mounting hole. Secure it from underneath the sink using the provided stability plate, washer, and nut.
- Water Connections: Connect the two flexible hoses to your hot and cold water supply lines. Ensure the connections are tight but do not overtighten. This faucet is specifically designed for low-pressure systems, typically where hot water is supplied by an under-sink water heater.
- Pull-out Spray Installation: Install the pull-out spray hose and counterweight (if applicable) according to the detailed instructions. Ensure the hose moves freely.
- Testing: Once all connections are made, slowly turn on the main water supply and check for any leaks. Operate the faucet to ensure proper water flow and temperature control.
Image: Technical drawing showing the dimensions (21.7 cm length, 20.7 cm height, 5.7 cm base diameter) and 140° swivel range of the BLANCO Elipso-S II kitchen faucet. Note: The product description states 115° swivel, while the image shows 140°. Please refer to the product's official specifications for the most accurate swivel range.
Operating Instructions
Image: The BLANCO Elipso-S II low-pressure kitchen faucet, showcasing its single-lever design and integrated pull-out spray in a metallic aluminum finish.
- Water Flow and Temperature: The single lever controls both water flow and temperature. Lift the lever to increase flow. Move the lever left for hot water and right for cold water.
- Pull-out Spray: Gently pull the spray head from the spout to extend the hose. This provides an extended reach for rinsing and cleaning.
- Jet Type Selection: The pull-out spray features two jet types. A button or switch on the spray head allows you to toggle between a standard aerated stream and a powerful spray function.
- Swivel Spout: The faucet spout can swivel up to 115° (or 140° as per diagram) to cover multiple sink bowls or move out of the way when not in use.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your BLANCO faucet.
- Cleaning: Clean the faucet regularly with a soft cloth and mild soap. Avoid abrasive cleaners, scouring pads, or harsh chemicals, as these can damage the finish.
- Limescale Removal: The patented jet regulator and anti-limescale nubs help reduce limescale buildup. For stubborn deposits, use a descaling agent specifically designed for faucets, following the product's instructions. Gently rub the nubs to dislodge limescale.
- Cartridge Care: The premium cartridge with durable ceramic seals is designed for long-term use. If you notice a change in water flow or temperature control, the cartridge may need inspection or replacement.
- Spare Parts: Wear parts such as seals or cartridges can be ordered from the official BLANCO online shop.
Troubleshooting
Before contacting customer service, review the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Reduced water flow | Clogged aerator/jet regulator, kinked hose, low water pressure. | Clean the aerator/jet regulator. Check the pull-out hose for kinks. Verify main water pressure. |
| Leaking from spout or handle | Loose connections, worn seals, damaged cartridge. | Check and tighten connections. Replace worn seals. If leaking persists, the cartridge may need replacement. |
| Difficulty controlling temperature | Damaged or faulty cartridge. | The cartridge may need to be replaced. |
| Pull-out spray does not retract fully | Hose obstruction, incorrect counterweight placement. | Check for obstructions under the sink. Ensure the counterweight is correctly positioned on the hose. |
If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact BLANCO customer service.
Specifications
- Model: BLANCO Elipso-S II 514853
- Type: Low-Pressure Single-Lever Kitchen Faucet
- Material: Aluminum
- Finish: Polished (Metallic Aluminum)
- Dimensions (L x W x H): 21.7 x 5.7 x 20.7 cm
- Weight: 3.54 kg
- Installation Method: Single-hole
- Number of Handles: 1
- Swivel Spout: 115° (Note: Technical drawing indicates 140°)
- Included Components: Faucet, pull-out spray, stability plate, 2 flexible connection hoses (450 mm)
- Country of Origin: Germany
Warranty and Support
BLANCO is committed to providing high-quality products. This faucet is manufactured using premium components, including a high-end cartridge with durable ceramic seals, ensuring reliability and longevity.
For any questions, technical assistance, or to order spare parts, please contact BLANCO customer service. BLANCO maintains a network of customer service technicians to provide prompt support.
You can find more information and contact details on the official BLANCO website or through the BLANCO store on Amazon: BLANCO Amazon Store.
