Adams Rite 4568 Eurostyle Deadlatch Handle Instruction Manual

Introduction

The Adams Rite 4568 Eurostyle Deadlatch Handle is engineered for reliable operation of Adams Rite 4300, 4500, and 4900 Series Deadlatches. This handle features an integrated activator cam disc designed to fit securely into the cylinder hole of the deadlatch, enabling easy unlocking through a natural downward hand movement. It is important to note that this handle is specifically designed for deadlatch operation and is not intended for use as a door pull.

Product Features

• Lever Design: Constructed from durable cast aluminum, the 4568 model features a straight lever. Available finishes include Satin Aluminum (130), Dark Bronze (121), and Black (119). Its modern European styling provides a comfortable hand grip, with the shank strategically offset from the narrow stile jamb to enhance hand safety during operation.
• Escutcheon: The escutcheon measures 1-3/8 inches by 4 inches, designed to complement the aesthetics of narrow stile doors. It incorporates a steel mounted base secured by hidden screws for a clean appearance. Two large helical compression springs are included within the assembly. A 1/4-inch square heat-treated spindle is integrated into the escutcheon, which interlocks with the cam plug. The escutcheon's finish matches that of the lever.

Components Included

Each Adams Rite 4568 Eurostyle Deadlatch Handle package typically includes the following items:

• 1 Eurostyle Deadlatch Handle (4568 Straight Lever)
• 1 Activator Cam Plug (handed Left Hand or Right Hand as specified)
• Mounting Screws

Setup and Installation

Follow these steps for proper installation of your Adams Rite 4568 Eurostyle Deadlatch Handle:

1. Preparation: Ensure the door is correctly prepared for a deadlatch handle installation. This includes verifying the presence and appropriate sizing of the cylinder hole for the cam plug.
2. Handing Determination: Identify the correct handing (Left Hand or Right Hand) for the cam plug based on your door's opening direction. The provided cam plug can be configured for either handing.
3. Mounting the Escutcheon: Position the escutcheon plate on the door. Carefully align the 1/4-inch square spindle with the corresponding mechanism of the deadlatch. Secure the escutcheon using the hidden mounting screws provided.
4. Attaching the Lever: Attach the lever to the escutcheon, ensuring that the activator cam disc properly engages with the deadlatch's cylinder hole. The lever should move smoothly and freely.
5. Functionality Test: After completing the installation, test the handle's operation. Verify that a downward movement of the lever effectively retracts the deadlatch and allows the door to open.

Operating Instructions

To operate the Adams Rite 4568 Eurostyle Deadlatch Handle:

• Apply a natural downward pressure to the lever.
• This action will engage the internal mechanism, retracting the deadlatch and allowing the door to open.
• Release the lever to allow the deadlatch to extend and secure the door in its closed position.

Maintenance

Proper maintenance ensures the longevity and smooth operation of your deadlatch handle:

• Regular Inspection: Periodically inspect the handle and escutcheon for any signs of wear, damage, or loose components.
• Cleaning: Clean the handle and escutcheon using a soft, damp cloth. Avoid using abrasive cleaners, harsh chemicals, or solvents, as these can damage the finish.
• Tighten Fasteners: Ensure all mounting screws remain securely tightened to maintain proper function and security.
• Lubrication: If the handle's operation becomes stiff, a small amount of silicone-based lubricant can be applied to the internal moving parts of the deadlatch mechanism. Do not apply lubricant directly to the handle's exterior.

Troubleshooting

Refer to the following common issues and their potential solutions:

• Handle is Stiff or Difficult to Operate:
  • Check for any physical obstructions around the handle or escutcheon.
  • Verify that the mounting screws are not overtightened, which can cause the internal mechanism to bind.
  • Ensure the deadlatch mechanism itself is clean and properly lubricated.
  • Confirm the cam plug is correctly aligned and engaging with the deadlatch's internal components.
• Handle Does Not Retract the Deadlatch Fully:
  • Re-examine the installation of the cam plug and its engagement with the deadlatch's cylinder hole.
  • Inspect the deadlatch mechanism for any signs of damage or excessive wear.
• Loose Handle:
  • Tighten the hidden mounting screws located on the escutcheon plate.

Specifications

Warranty and Support

For detailed warranty information, technical assistance, or to inquire about replacement parts, please contact Adams Rite customer service directly. It is recommended to retain your purchase receipt for any warranty claims or support inquiries. You may also visit the official Adams Rite website for additional resources and contact information.