Conair Pedicure Foot Spa with Bubbles and Pinpoint Massage Attachment

Product Overview

The Conair FB5X Foot Spa with Bubbles and Heat is designed to provide a relaxing foot massage experience. It features convenient toe-touch controls to activate bubbles and maintain water temperature. The extra-deep basin accommodates a full-foot massage, and the splashguard and base include nodes for additional massage action.

• Soothing Foot Spa: Designed to relax and soothe tired feet with invigorating bubbles.
• Relaxing Massage Action: Features 2 bubble strips and nodes on the splashguard and base for enhanced massage. Nonslip feet ensure stability during use.
• Easy Operation: Toe-touch controls activate soothing bubbles. The extra-deep basin is suitable for a full foot massage. The foot spa maintains the temperature of water placed into the basin for approximately 10 minutes.

Important Safety Information

To reduce the risk of burns, fire, electric shock, or injury to persons, please read all instructions before using this appliance. Always follow basic safety precautions when using electrical appliances.

• Always ensure the foot bath is unplugged before adding or removing water.
• Do not use while sleeping or with bare feet.
• Keep the cord away from water to prevent electric shock.
• Allow the foot bath to cool before removing your feet.
• Do not use if you have any foot injuries, diabetes, or poor circulation. Consult a doctor before use if you are pregnant or have any health concerns.
• Never operate this appliance if it has a damaged cord or plug, if it is not working properly, or if it has been dropped or damaged.
• Do not attempt to repair the appliance yourself. Refer to the 'Warranty and Support' section for service information.

Setup

1. Placement: Place the foot spa on a firm, level surface. Ensure the area is clear and there is no risk of tripping over the power cord.
2. Fill with Water: Fill the foot spa with warm water up to the indicated fill line. Note: This unit is designed to maintain the temperature of the water you put into it, not to heat cold water from scratch. For best results, start with comfortably warm water.
3. Plug In: Plug the power cord into a standard electrical outlet.

Image: The Conair Foot Spa filled with water, showing the bubbling action.

Operating Instructions

1. Activate Functions: Once filled with water and plugged in, use the toe-touch control button located on the top of the unit to activate the bubbles and heat maintenance feature. Press once to turn on.
2. Immerse Feet: Gently place your feet into the extra-deep basin.
3. Utilize Massage Features: Move your feet over the nodes on the splashguard and base for additional massage. The pinpoint massage attachment in the center can be used to target specific pressure points on your arches.
4. Relaxation: Enjoy the soothing bubbles and maintained warm water for an estimated 10 minutes of relaxation.
5. Turn Off: When finished, press the toe-touch control button again to turn off the unit.

Image: A foot pressing the toe-touch control button to activate the foot spa.

Maintenance

Proper maintenance ensures the longevity and hygiene of your foot spa.

1. Unplug: Always unplug the unit from the electrical outlet before cleaning.
2. Empty Water: Carefully pour out the water from the basin.
3. Clean: Wipe the unit with a soft, damp cloth and mild, non-abrasive soap. Do not use harsh cleaners or abrasive pads.
4. Rinse: Rinse thoroughly with clean water.
5. Dry: Allow the unit to air dry completely before storing.
6. Storage: Store the foot spa in a cool, dry place, away from direct sunlight and out of reach of children. Do not hang the unit by the power cord.

Troubleshooting

• Unit does not turn on:
  • Ensure the power cord is securely plugged into a working electrical outlet.
  • Check if the outlet is receiving power (e.g., by plugging in another appliance).
• No bubbles or weak bubbles:
  • Ensure the unit is turned on and the water level is appropriate (not too high or too low).
  • Check for any obstructions in the bubble strips.
• Water is not heating up:
  • This foot spa is designed to maintain the temperature of the water you put into it, not to heat cold water. Always start with warm water.
  • The heat maintenance feature will keep the water warm for a limited time (approx. 10 minutes).

Specifications

Warranty and Support

For warranty information or product support, please refer to the documentation included with your purchase or contact Conair customer service directly.

Legal Disclaimer: Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.