1. Setup and Initial Use
1.1 Unpacking and Assembly
Carefully remove all components from the packaging. Ensure all parts are present before assembly. The main components include the motor unit, wand, motorized cleaner head, and various attachments.
To assemble, connect the wand to the main motor unit until it clicks securely. Then, attach your desired cleaner head or accessory to the end of the wand or directly to the motor unit for handheld use.
1.2 Charging the Battery
Before first use, fully charge the vacuum cleaner. The Dyson DC35 uses lithium-ion batteries for consistent power.
Image: The Dyson DC35 charging on its wall-mounted docking station. The docking station provides convenient storage and ensures the vacuum is always ready for use.
- Install the wall-mounted docking station in a convenient location near a power outlet. Ensure it is securely fastened to the wall.
- Plug the charger into the docking station and then into a wall outlet.
- Place the vacuum cleaner onto the docking station. The indicator light on the battery will illuminate to show it is charging.
- Allow approximately 3.5 hours for a full charge.
2. Operating the Vacuum
2.1 Power Modes
The Dyson DC35 features two power modes:
- Standard Mode: Provides up to 15 minutes of powerful fade-free suction for general cleaning.
- Max Mode: Offers 6 minutes of increased suction for more demanding tasks. Activate by pressing the 'MAX' button on the top of the motor unit.
To operate, simply press and hold the power trigger. Release the trigger to turn off the vacuum.
2.2 Cleaning Different Surfaces and Areas
The DC35 is designed for versatile cleaning across various floor types and hard-to-reach areas.
Image: A user operating the Dyson DC35 on a hard floor, demonstrating its maneuverability and effectiveness for daily cleaning.
- Hard Floors: The motorized cleaner head features anti-static carbon fiber brushes to effectively remove fine dust without damaging delicate surfaces.
- Carpets: The motorized cleaner head's stiff nylon bristles agitate carpet pile to remove ground-in dirt.
- High-Reach Cleaning: Attach the wand and a suitable accessory (e.g., combination tool) for cleaning ceilings, curtain rails, and other elevated surfaces.
Image: The Dyson DC35 being used to clean a high window frame, showcasing its lightweight design and extended reach for versatile cleaning tasks.
- Stairs and Upholstery: Remove the wand to use the vacuum in handheld mode with the motorized cleaner head or other attachments for stairs, car interiors, and furniture.
Image: The Dyson DC35 in its handheld configuration, effectively cleaning carpeted stairs. This demonstrates its adaptability for various surfaces and tight spaces.
2.3 Product Overview Video
Watch this official video for a visual demonstration of the Dyson DC35's features and capabilities.
Video: An official Dyson video showcasing the DC35 Digital Slim Multi Floor Cordless Vacuum Cleaner, highlighting its powerful digital motor, Root Cyclone technology, and versatility for different cleaning tasks.
3. Maintenance
Regular maintenance ensures your Dyson DC35 continues to perform optimally.
3.1 Emptying the Clear Bin
Empty the clear bin as soon as the dirt reaches the MAX level mark. Do not overfill.
Image: A hand demonstrating how to empty the clear bin of the Dyson DC35 directly into a waste receptacle, illustrating the hygienic one-touch release mechanism.
- Hold the vacuum cleaner over a trash can.
- Press the red bin release button located on the side of the motor unit. The bin base will open, and the dirt shroud will slide down, ejecting dirt.
- Close the bin base firmly until it clicks into place.
3.2 Washing the Filter
Wash the filter at least every month with cold water. Do not use detergents.
- Twist and lift the filter out from the top of the motor unit.
- Rinse the filter under cold running water until the water runs clear.
- Shake excess water off and leave to dry completely for at least 24 hours in a warm place. Ensure it is absolutely dry before replacing.
3.3 Clearing Blockages
If the vacuum loses suction, check for blockages in the cleaner head, wand, and main motor unit intake. Always ensure the vacuum is turned off before checking for blockages.
4. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power/Vacuum not turning on | Battery not charged; Power trigger not held | Charge the battery fully; Ensure the power trigger is continuously held during operation. |
| Loss of suction | Bin full; Filter dirty; Blockage in cleaner head/wand/intake | Empty the clear bin; Wash and dry the filter; Check and clear any blockages. |
| Brush bar not rotating | Blockage in brush bar; Cleaner head not properly attached | Remove any hair or debris from the brush bar; Ensure the cleaner head is securely attached. |
| Short run time | Battery not fully charged; Max mode continuously used | Ensure battery is fully charged before use; Use standard mode for general cleaning to maximize run time. |
5. Specifications
- Model: DC35 Digital Slim
- Product Dimensions: 11.8 x 9.1 x 44.1 inches
- Item Weight: 4.8 pounds
- Bin Volume: 0.35 Liters
- Battery Type: Lithium-ion
- Form Factor: Stick
- Special Feature: Dual action
6. Warranty Information
The Dyson DC35 Digital Slim Multi Floor Cordless Vacuum Cleaner comes with a 2-year warranty covering parts and labor from the date of purchase. Please retain your proof of purchase for warranty claims. This warranty covers defects in materials and workmanship under normal household use.
7. Customer Support
For further assistance, troubleshooting not covered in this manual, or to purchase replacement parts, please visit the official Dyson support website or contact their customer service.
