Product Overview
The CBE PC100 is a digital control panel designed for recreational vehicles, offering comprehensive monitoring and control functionalities. It features a microprocessor-controlled LED display for easy interaction and status updates.
Key functions include:
- Battery status monitoring for vehicle and service batteries (B1 and B2).
- Fresh water tank level testing and alarm.
- Electronic battery distribution.
- Three-way fuses for battery protection.
- Vehicle charging control.
- Battery function memory.
Image: The CBE PC100 digital control panel, showing its compact design and display area.
Setup and Installation
Installation of the CBE PC100 control panel should be performed by a qualified technician to ensure proper functionality and safety. Incorrect installation can lead to damage to the unit or the vehicle's electrical system.
Mounting the Panel
- Select a suitable, dry location within the vehicle, away from direct sunlight and excessive heat or moisture.
- Ensure sufficient space behind the panel for wiring connections.
- Cut an opening in the mounting surface according to the panel's dimensions (approximately 185 x 78 mm).
- Secure the panel using appropriate fasteners.
Electrical Connections
The PC100 connects to the vehicle's 12V electrical system. Refer to the detailed wiring diagram provided with the product packaging for specific connection points. Key connections include:
- Power Supply: Connect to a fused 12V DC supply.
- Vehicle Battery (B1): Connection for monitoring the starter battery.
- Service Battery (B2): Connection for monitoring the leisure battery.
- Water Tank Sensor: Connect to the fresh water tank level sensor.
- Charging Input: Connect to the vehicle's charging system.
Always disconnect the vehicle's main power supply before making any electrical connections.
Operating Instructions
The PC100 panel features an intuitive LED display and control buttons. Specific button functions may vary slightly, but general operation is as follows:
Powering On/Off
Press and hold the POWER button to turn the unit on or off. The LED display will illuminate upon activation.
Checking Battery Status
Press the BATTERY button to cycle through the status of the vehicle battery (B1) and service battery (B2). The display will show voltage levels and a graphical representation of charge.
Monitoring Water Tank Levels
Press the WATER button to view the fresh water tank level. An alarm will activate if the level drops below a pre-set threshold.
Controlling Charging
The panel automatically manages battery charging from the vehicle's alternator or an external charger. Indicators on the display will show when charging is active.
Maintenance
The CBE PC100 control panel requires minimal maintenance. Regular checks can help ensure its longevity and reliable operation.
- Cleaning: Wipe the display and panel surface with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Connections: Periodically check all electrical connections for tightness and corrosion.
- Fuses: The unit incorporates three-way fuses for protection. If a function fails, check the relevant fuse as indicated in the wiring diagram. Replace only with fuses of the correct rating.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Panel does not power on. | No power supply; Blown fuse; Loose connection. | Check main 12V supply; Inspect and replace fuses; Verify all wiring connections. |
| Incorrect battery readings. | Faulty battery connection; Sensor issue; Battery degradation. | Check battery terminals and wiring; Consult a technician to test batteries. |
| Water tank level inaccurate. | Faulty water sensor; Sensor wiring issue. | Inspect water tank sensor and its connections; Clean sensor if necessary. |
For issues not listed here, please contact CBE customer support or a certified service center.
Specifications
- Model: CBE PC100
- Manufacturer: CBE
- Part Number: 1402
- ASIN: B004G9QQCM
- Dimensions: Approximately 185 x 78 mm (Refer to product packaging for exact cutout dimensions)
- Input Voltage: 12V DC (nominal)
- Display Type: Microprocessor-controlled LED
Warranty and Support
CBE products are manufactured to high standards and come with a manufacturer's warranty. Please refer to the warranty card included with your product for specific terms and conditions.
For technical assistance, spare parts, or warranty claims, please contact your authorized CBE dealer or visit the official CBE website for support information.
Software update guarantees are currently unknown.