Harbor Breeze Universal Ceiling Fan and Light Wall Control (Model WC-100-L)

Introduction

The Harbor Breeze Universal Ceiling Fan and Light Wall Control (Model WC-100-L) provides convenient control over your ceiling fan's speed and light functions from a wall-mounted unit. This manual outlines the installation, operation, and maintenance of your new control to ensure safe and efficient use.

This unit features a 3-speed fan control and a full-range light dimmer, designed for indoor applications.

Safety Information

• Always disconnect power at the circuit breaker before installation, maintenance, or servicing.
• Consult a qualified electrician if you are unfamiliar with electrical wiring procedures.
• Ensure all wiring connections are secure and comply with local electrical codes.
• This device is designed for indoor use only. Do not install in outdoor locations.
• Do not use this control with compact fluorescent bulbs (CFLs).

Package Contents

Verify that all components are present before beginning installation:

• Universal Ceiling Fan & Light Wall Control Unit
• Fan Receiver Unit

This image shows the Harbor Breeze Universal Ceiling Fan and Light Wall Control (Model WC-100-L) and its receiver unit sealed in clear plastic retail packaging. The packaging highlights key features and specifications.

Product Features

• 3-Speed Fan Control (High, Medium, Low)
• Full Range Light Dimmer
• Wall-mounted design for convenient access
• White finish to blend with most decor
• Designed for indoor use
• Compatible with vaulted ceilings

A close-up view of the white wall control unit, showing the buttons for fan speed (HI, MED, LOW, FAN OFF), light control (LIGHT), and the main ON/OFF toggle switch at the bottom. The Harbor Breeze logo is visible.

Setup

1. Power Disconnection: Before beginning any installation, turn off power to the ceiling fan circuit at the main electrical panel. Ensure the power is completely off before proceeding.
2. Existing Switch Removal: Carefully remove the existing wall switch or control from the wall box.
3. Wiring: Connect the new Harbor Breeze wall control and its receiver unit according to the wiring diagram provided with your product packaging. Ensure proper connection of line, load, and ground wires. If you are unsure about any wiring steps, consult a qualified electrician.
4. Mounting: Secure the wall control unit into the wall box using the provided screws. Attach the faceplate.
5. Power Restoration: Once installation is complete and all connections are secure, restore power at the circuit breaker.

Important Compatibility Notes:

• This control works on vaulted ceilings.
• It will not work with flush-mount fans.
• It is not for use in outdoor locations.
• It is not compatible for use with compact fluorescent bulbs (CFLs).

Operating Instructions

The wall control allows you to manage your ceiling fan and light independently. Familiarize yourself with the buttons for optimal use:

• Light Control: Press the LIGHT button to turn the light on or off. Hold the LIGHT button to dim or brighten the light to your desired level.
• Fan Speed Control:
  • Press HI for high fan speed.
  • Press MED for medium fan speed.
  • Press LOW for low fan speed.
  • Press FAN OFF to turn the fan off.
• Main Power Switch: Use the ON/OFF toggle switch located at the bottom of the unit for overall power control to both the fan and light.

Maintenance

• Cleaning: To clean the wall control, gently wipe it with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or internal components.
• Bulb Replacement: Always ensure power is disconnected at the circuit breaker before replacing light bulbs in your ceiling fan. Use only compatible incandescent or LED bulbs. This control is not compatible with compact fluorescent bulbs (CFLs).

Troubleshooting

If you experience issues with your Harbor Breeze wall control, refer to the following common troubleshooting steps:

• Fan or Light Not Responding:
  • Check if the main power toggle switch on the wall control is in the "ON" position.
  • Verify that power is supplied to the circuit by checking the circuit breaker at your electrical panel.
  • Ensure the fan receiver and wall control are properly installed and wired.
  • Confirm that the fan and light bulbs are compatible and functioning correctly.
• Light Flickers or Does Not Dim:
  • Ensure you are not using compact fluorescent bulbs (CFLs), as this control is not compatible with them.
  • Check the wattage of the installed light bulbs; ensure the total wattage does not exceed the maximum light watts (300W) specified for this control.

Specifications

Warranty and Support

For warranty information, technical assistance, or to inquire about replacement parts, please contact Harbor Breeze customer service. Refer to the contact information provided in your product packaging or visit the official Harbor Breeze website for the most up-to-date support resources.

You may also call 1-800-527-1292 for assistance.