1. Introduction
The Altec Lansing Octiv Stage MP450 is a versatile speaker dock designed to enhance your audio and viewing experience with compatible Apple devices. It features dual speakers for clear sound, charges your device while docked, and offers flexible viewing angles with its rotating stand.
Package Contents
- Altec Lansing Octiv Stage / Octiv 450 Speaker System
- Remote Control
- Quick-Connect Instructions
Image: The Altec Lansing Octiv Stage MP450 speaker dock, showcasing an iPad securely docked in landscape orientation, displaying video content. The compact remote control is visible in the foreground, indicating wireless operation. This image illustrates the primary function and components of the speaker dock.
2. Setup
2.1 Power Connection
- Connect the power adapter to the DC IN port located on the rear of the Octiv Stage.
- Plug the power adapter into a standard electrical wall outlet.
- The unit will typically power on automatically, or it can be activated using the power button.
2.2 Device Docking
- Carefully align your iPad, iPhone, or iPod with the 30-pin connector on the dock.
- Gently push the device down onto the connector until it is securely seated.
- For iPad 2 and later models, utilize the provided rubber stay to ensure a snug and stable fit.
- The docked device will commence charging automatically when the speaker dock is powered.
2.3 Auxiliary Input
To connect other portable audio devices (e.g., MP3 players) that do not feature a 30-pin connector, use a standard 3.5mm audio cable (not included). Connect one end of the cable to your device's headphone jack and the other end to the AUX IN port on the Octiv Stage.
3. Operation
3.1 Audio Playback
Once your compatible device is properly docked, audio will automatically be routed through the Octiv Stage speakers. Adjust the playback volume using the dedicated controls on the speaker dock, the included remote control, or directly from your docked device.
3.2 Device Charging
The Octiv Stage is designed to charge your docked iPad, iPhone, or iPod whenever the unit is connected to a power source, including during active audio playback.
3.3 Rotating Stand
The integrated docking stand allows for flexible viewing. You can gently rotate your iPad while it is docked to switch between portrait and landscape orientations. The stand also permits tilting the screen forward or backward to achieve various optimal viewing angles.
3.4 Remote Control Functions
The provided full-featured remote control offers convenient wireless operation of the speaker dock and basic media functions:
- Power: Toggles the unit on or off.
- Volume Up/Down: Increases or decreases the speaker volume.
- Play/Pause: Controls media playback (start/stop).
- Next/Previous Track: Skips to the next or previous audio track.
- Menu Navigation: Provides limited navigation capabilities depending on the specific device and application.
Note: The extent of remote control functionality may vary based on the specific application being used on your docked device and its iOS version.
4. Maintenance
4.1 Cleaning
To clean the Octiv Stage, first disconnect it from the power source. Use a soft, dry cloth to wipe down the surfaces. Avoid using liquid cleaners, aerosol sprays, or abrasive materials, as these can damage the finish or internal components.
4.2 Storage
When the unit is not in use for extended periods, store it in a cool, dry environment, away from direct sunlight, excessive heat, or extreme cold.
5. Troubleshooting
| Problem | Solution |
|---|---|
| No power | Ensure the power adapter is securely connected to both the unit and a functional electrical outlet. Test the outlet with another device to confirm it is working. |
| No sound from speakers | Verify that your device is properly docked. Confirm that the volume on both the Octiv Stage and your docked device is turned up and not muted. If using the AUX IN, ensure the audio cable is fully inserted and the external device's volume is adequate. |
| Device not charging | Confirm the speaker dock is powered on and your device is correctly seated on the 30-pin connector. Inspect the connector for any debris that might obstruct the connection. |
| Remote control not working | Check the battery in the remote control and replace it if necessary. Ensure there are no physical obstructions between the remote control and the unit's infrared sensor. |
| iPad/iPhone connection is tenuous or disconnects easily | Ensure the device is firmly seated on the dock. If you are using a protective case, remove it to ensure full and proper contact with the 30-pin connector. For iPad 2 and later models, use the provided rubber stay to improve stability. |
| Unit powers down after 10 minutes (energy saving feature) | This behavior is an intended energy-saving feature. The unit will automatically power down if no audio is playing for a period of 10 minutes. There is no user-adjustable setting to disable this feature. |
6. Specifications
- Model: MP450
- Dimensions (H x W x D): 4.33 x 8.66 x 6.06 inches (11 x 22 x 15.4 cm)
- Weight: Approximately 1 pound (0.45 kg)
- Speaker Drivers: Two 2-inch (50-millimeter) full-range neodymium drivers
- Connectivity: 30-pin dock connector, 3.5mm auxiliary input
- Compatible Devices: iPad, iPad 2, iPhone 4, iPod Touch, iPod Nano, and other iPod/iPhone models with 30-pin connector.
- Power: AC Adapter (Input: 100-240V ~ 50/60Hz)
7. Warranty and Support
For detailed warranty information and technical support, please refer to the quick-connect instructions included with your product. It is advisable to retain your proof of purchase for any warranty claims.
Manufacturer: Altec Lansing, LLC
Website: www.alteclansing.com (Please note: This link is provided as a general reference. For the most accurate and up-to-date support information, consult your product's physical manual or the manufacturer's official website.)
