Miele Original Dishwasher Rinse Aid Instruction Manual

1. Product Overview

The Miele Original Dishwasher Rinse Aid is specifically formulated to complement your dishwasher detergent, ensuring optimal drying results and a brilliant, sparkling finish for your kitchenware. This rinse aid works to prevent watermarks, limescale deposits, and odors, while also offering protection against long-term glass corrosion.

Image 1: Front view of the Miele Original Dishwasher Rinse Aid bottle, showing the "Rinse Aid" label and Miele branding.

• Optimal Drying: Helps dishes dry thoroughly, reducing the need for towel drying.
• Sparkling Finish: Achieves a brilliant shine on dishes, especially glassware, free from streaks and spots.
• Glass Protection: Formulated to prevent glass corrosion, preserving the clarity and longevity of your glassware.
• Prevents Residue: Effectively eliminates watermarks, limescale, and odors for impeccably clean results.

2. Safety Information

This product contains non-ionic surfactants. Always handle cleaning products with care. Keep out of reach of children and pets. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice if irritation persists. Do not ingest. If swallowed, seek immediate medical attention and show this container or label.

Store in a cool, dry place away from direct sunlight and extreme temperatures.

3. Setup: Filling the Rinse Aid Dispenser

To ensure your Miele dishwasher delivers the best results, regularly check and refill the rinse aid dispenser. The Miele Original Dishwasher Rinse Aid bottle features an easy-pour spout for convenient and mess-free refilling.

1. Locate the rinse aid dispenser in your dishwasher. It is typically found next to the detergent dispenser on the inside of the dishwasher door.
2. Open the dispenser cap.
3. Carefully pour the Miele Original Dishwasher Rinse Aid into the dispenser opening. Fill until the indicator shows "full" or to the maximum fill line. Avoid overfilling.
4. Close the dispenser cap securely until it clicks. Wipe away any spills immediately with a damp cloth to prevent foaming during the wash cycle.

Image 2: The Miele Rinse Aid bottle held in a hand, illustrating its ergonomic design and size for easy handling during refilling.

4. Operating Instructions

Once the rinse aid dispenser is filled, the Miele Original Dishwasher Rinse Aid will be automatically dispensed during the rinse cycle of your dishwasher. It works by reducing the surface tension of water, allowing it to sheet off dishes more effectively, which prevents water droplets from drying and leaving spots or streaks.

For best results, ensure your dishwasher's rinse aid setting is appropriate for your water hardness. Refer to your dishwasher's instruction manual for specific guidance on adjusting this setting.

5. Maintenance and Storage

To maintain the quality and effectiveness of your Miele Original Dishwasher Rinse Aid:

• Store the bottle upright in a cool, dry place.
• Keep the cap tightly closed when not in use to prevent evaporation or contamination.
• The bottle is made from 100% recycled plastic, contributing to environmental sustainability. Please recycle the empty bottle according to local regulations.

Image 3: Back view of the Miele Rinse Aid bottle, displaying detailed product information, usage instructions in multiple languages, and recycling symbols.

6. Troubleshooting

If you experience issues with drying or spotting, consider the following:

• Water Spots or Streaks:
  • Check the rinse aid dispenser level and refill if necessary.
  • Adjust the rinse aid dosage setting on your dishwasher. If water spots persist, increase the dosage; if excessive foaming occurs, decrease it.
  • Ensure dishes are loaded correctly, allowing water to drain freely.
• Cloudy Glassware:
  • This can be due to soft water and too much rinse aid. Try reducing the rinse aid dosage.
  • Could also indicate glass corrosion, which rinse aid helps prevent but cannot reverse.

For persistent issues, consult your Miele dishwasher's specific user manual or contact Miele customer support.

7. Specifications

Image 4: Miele Rinse Aid bottle shown with a ruler, indicating its height of 9.4 inches (23 cm).

8. Warranty and Support

For specific warranty information regarding Miele Original Dishwasher Rinse Aid, please refer to the product packaging or contact Miele customer service directly. Miele is committed to providing high-quality products and support.

For further assistance or inquiries, please visit the official Miele website or contact their customer support line. You can also visit the Miele Store on Amazon for more products and information.