Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your Whitmor Supreme 3-Tier Shelving Unit, Model 6070-3437. This durable shelving unit is designed to increase storage space in various environments such as kitchens, laundry rooms, basements, bathrooms, and offices. It features heavy-duty black epoxy steel construction and adjustable shelves.
Safety Information
- Weight Capacity: Do not exceed the maximum weight capacity of 350 pounds (159 kg) per shelf. Ensure weight is evenly distributed across each shelf.
- Assembly: Assemble the unit strictly according to the provided instructions to ensure proper support and stability.
- Placement: Always place the assembled shelving unit on a stable, flat, and level floor surface.
- NSF Approval: This unit is NSF approved, making it suitable for use in various environments, including refrigerators, freezers, and wash areas.
Package Contents
Please verify that all components are present before beginning assembly:
- 3 x Wire Shelves
- 4 x Bottom Post Sections
- 4 x Top Post Sections
- 4 x Leveling Feet
- 24 x Plastic Shelf Clips (8 clips per shelf)
Setup and Assembly Instructions
Assembly of your Whitmor Supreme 3-Tier Shelving Unit is designed to be easy and requires no tools.
- Attach Leveling Feet: Screw the four leveling feet into the bottom of the four bottom post sections.
- Connect Post Sections: Insert the top post sections into the bottom post sections. Ensure they are securely joined.
- Install Plastic Clips: Determine the desired height for your bottom shelf. Snap two plastic clips around each of the four posts at the same height. Ensure the clips are securely locked into the grooves on the posts.
- Place Bottom Shelf: Carefully slide the first wire shelf down over the four posts, ensuring that the shelf corners rest firmly on the plastic clips. The shelf should be oriented with the lip facing downwards, as shown in the image below.
Image: Correct shelf direction. The shelf's reinforcing lip should face downwards for proper installation and stability.
- Install Remaining Shelves: Repeat steps 3 and 4 for the remaining two shelves, positioning them at your desired heights.
- Adjust Leveling: Once fully assembled, adjust the leveling feet at the bottom of the posts to ensure the unit is stable and does not wobble on uneven surfaces.
Image: Close-up view of a leveling foot attached to the bottom post section, demonstrating how to adjust for stability.
Operating and Usage Guidelines
Your Whitmor Supreme 3-Tier Shelving Unit is designed for versatile storage. Here are some guidelines for optimal use:
- Adjustable Shelves: The shelves can be repositioned to accommodate items of various heights. To adjust, remove items, lift the shelf, remove the plastic clips, reposition the clips, and then re-seat the shelf.
- Even Weight Distribution: Always distribute weight evenly across each shelf to maintain stability and prevent damage.
- Versatile Use: This unit is suitable for organizing items in garages, kitchens, pantries, offices, and more.
Image: The shelving unit used in a garage for organizing gardening tools and supplies.
Image: The shelving unit utilized in a kitchen for storing small appliances and cookware.
Maintenance
To ensure the longevity and appearance of your shelving unit, follow these simple maintenance tips:
- Cleaning: Wipe down the shelves and posts with a soft, damp cloth. For stubborn dirt, a mild soap solution can be used, followed by wiping with a clean, dry cloth.
- Avoid Harsh Cleaners: Do not use abrasive cleaners, scouring pads, or harsh chemicals, as these can damage the epoxy finish.
- Regular Checks: Periodically check all connections and leveling feet to ensure the unit remains stable and secure.
Troubleshooting
If you encounter any issues with your shelving unit, refer to the following common problems and solutions:
- Unit is Wobbly:
- Ensure the unit is placed on a flat, level surface.
- Adjust the leveling feet at the bottom of each post until the unit is stable.
- Verify that all plastic shelf clips are securely snapped into the grooves on the posts and that the shelves are fully seated on the clips.
- Shelf Not Holding Weight / Sagging:
- Check that the weight on the shelf does not exceed the 350 lb (159 kg) capacity and is evenly distributed.
- Ensure the plastic clips are correctly installed and fully supporting the shelf at all four corners.
- Confirm the shelf is oriented with its reinforcing lip facing downwards.
Specifications
| Model Number | 6070-3437 |
| Brand | Whitmor |
| Dimensions (L x W x H) | 91.44 x 35.56 x 91.44 cm (36 x 14 x 36 inches) |
| Weight Capacity (per shelf) | 159 kg (350 lbs), evenly distributed |
| Material | Heavy-duty Black Epoxy Steel |
| Number of Shelves | 3 |
| Assembly Required | Yes (Tool-free) |
| Special Features | Adjustable shelves, NSF Approved, Leveling feet |
Image: Dimensional diagram of the shelving unit, showing 36.0 inches (91.4 cm) in height and width, and 14.0 inches (35.6 cm) in depth.
Warranty
This Whitmor Supreme 3-Tier Shelving Unit is backed by a 10-year limited warranty. For specific details regarding warranty coverage and claims, please refer to the warranty information provided with your purchase or contact Whitmor customer support.
Support
If you require further assistance, have questions not covered in this manual, or need to report a missing part, please contact Whitmor customer support. Contact information can typically be found on the product packaging or the official Whitmor website.
