U.S. Polo Assn. Classic Men's USC80001 Two-Tone Bracelet Analog Watch

Introduction

Thank you for choosing the U.S. Polo Assn. Classic Men's USC80001 Two-Tone Bracelet Analog Watch. This manual provides essential information for the proper setup, operation, and maintenance of your timepiece. Please read these instructions carefully to ensure optimal performance and longevity of your watch.

Image: Front view of the U.S. Polo Assn. Classic Men's USC80001 Two-Tone Bracelet Analog Watch, showcasing its two-tone case, white dial with numeral hour markers, and gold-tone hands.

Setup

1. Setting the Time

1. Gently pull the crown (the small knob on the side of the watch case) outwards to the time-setting position.
2. Rotate the crown in either direction to move the hour and minute hands until the desired time is set.
3. Once the time is set, push the crown back into its original position against the watch case. This will start the watch movement.

Image: Side view of the watch, highlighting the crown used for setting the time.

2. Adjusting the Bracelet and Clasp

The watch features a two-tone link band with a jewelry clasp closure. To adjust the fit of the bracelet, links may need to be added or removed. It is recommended to have this adjustment performed by a qualified jeweler or watch technician to prevent damage to the band or clasp.

• To open the clasp, gently lift the small lever on the clasp mechanism.
• To close, align the two parts of the clasp and press firmly until it clicks securely into place.

Image: Back view of the watch, showing the two-tone link bracelet and the jewelry clasp mechanism.

Operating Your Watch

Your U.S. Polo Assn. Classic watch is powered by a quality quartz movement, providing accurate timekeeping. Once the time is set and the bracelet is adjusted, the watch is ready for daily wear.

Image: The U.S. Polo Assn. Classic watch displayed on a wrist, demonstrating its appearance when worn.

Important Note on Water Resistance:

This watch is NOT water resistant. Avoid all contact with water, including showering, swimming, or exposure to heavy rain. Water exposure can cause irreversible damage to the watch movement and void any warranty.

Maintenance

Cleaning

To maintain the appearance of your watch, wipe the case and bracelet regularly with a soft, dry cloth. Do not use chemical cleaners or abrasive materials, as these can damage the finish.

Battery Replacement

Your watch is powered by a product-specific battery. When the watch stops running, it indicates that the battery needs to be replaced. It is highly recommended to have the battery replaced by a professional watch repair service to ensure proper sealing and prevent damage to the internal components.

Storage

When not wearing your watch, store it in a dry, cool place, away from direct sunlight and extreme temperatures. The original watch box can be used for safe storage.

Troubleshooting

• Watch Not Running: Ensure the crown is fully pushed in against the watch case. If the watch still does not run, the battery may need replacement. Refer to the "Battery Replacement" section under Maintenance.
• Inaccurate Time: If the watch is consistently losing or gaining time, the battery may be low, or the movement may require servicing. Consult a professional watch technician.
• Condensation Under Crystal: This indicates moisture has entered the watch. Immediately seek professional service to prevent further damage. Remember, this watch is not water resistant.

Specifications

Warranty Information

This U.S. Polo Assn. Classic watch is covered by a manufacturer's warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included with your purchase or contact the manufacturer directly. Keep your proof of purchase for warranty claims.

Customer Support

For further assistance, technical support, or service inquiries, please contact Accutime, the manufacturer of U.S. Polo Assn. Classic watches. Contact information can typically be found on their official website or on the product packaging.

When contacting support, please have your watch model number (USC80001) and purchase details readily available.