Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your Monster Universal Learning Remote, Model 121713. This remote is designed to simplify your home entertainment experience by consolidating multiple remote controls into one easy-to-use device.
Figure 1: Monster Universal Learning Remote (Evolution 50) in its retail packaging. The image displays the remote's layout with various control buttons for media playback, channel, volume, and device selection.
What's in the Box
Figure 2: Side view of the product packaging, detailing the contents included with the Monster Universal Learning Remote.
- Monster Evolution 50 Universal Learning Remote
- User Guide (this document)
- 4 AAA Batteries
Setup
Battery Installation
- Locate the battery compartment on the back of the remote control.
- Slide the battery cover downwards and lift to open.
- Insert four (4) AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Replace the battery cover by sliding it back into place until it clicks securely.
Initial Programming and Learning
The Monster Universal Learning Remote features both built-in codes for common devices and a learning function for less common or new devices. It uses infrared technology to communicate with your devices.
Figure 3: Side view of the product packaging, detailing key features such as built-in codes and future-proof learning capabilities.
Using Built-in Codes
The remote comes pre-programmed with codes for hundreds of AV components. To use a built-in code:
- Turn on the device you wish to control (e.g., Television).
- Press and hold the corresponding device button on the remote (e.g., TV, DVD, STB, AVR).
- While holding the device button, enter the 3-digit code for your device brand (refer to the separate code list provided with your remote or available online).
- Release the device button. Test the remote's functions. If the device does not respond, try the next code for your brand.
Using the Learning Function
The learning function allows the Monster remote to mimic signals from your original remote control.
- Place the Monster remote and your original remote control on a flat surface, facing each other, with their infrared emitters aligned and approximately 1-2 inches apart.
- Press and hold the SHIFT button on the Monster remote until the indicator light blinks.
- Press the device button on the Monster remote that corresponds to the device you want to program (e.g., TV).
- Press the button on the Monster remote that you wish to teach a function (e.g., POWER). The indicator light will illuminate steadily.
- Press and hold the corresponding button on your original remote (e.g., original remote's POWER button) until the indicator light on the Monster remote blinks rapidly, indicating successful learning.
- Repeat step 4 and 5 for all other buttons you wish to program.
- To exit learning mode, press the SHIFT button again.
Operating the Remote
The Monster Universal Learning Remote is designed for intuitive control of your entertainment system. Its ergonomic design and backlit buttons enhance usability in various lighting conditions.
Figure 4: Back view of the product packaging, illustrating the ergonomic design and highlighting the ease of use and button layout.
Basic Controls
- ON/OFF: Powers your selected device on or off.
- INPUT: Cycles through input sources on your TV or receiver.
- VOL +/-: Adjusts the volume of the selected audio device.
- CH +/-: Changes channels on your TV or set-top box.
- MUTE: Mutes the audio.
- Number Pad (0-9): Direct channel entry or menu navigation.
- Navigation Pad (Up, Down, Left, Right, ENTER): Navigates menus and confirms selections.
- PLAY, PAUSE, STOP, REW, FF, REC: Media playback controls for DVD/Blu-ray players, DVRs, etc.
Advanced Features
- Backlit Buttons: The remote features backlighting for easy use in dim or dark settings. This feature activates automatically when buttons are pressed.
- SHIFT Button: The SHIFT button allows access to secondary functions of certain buttons, indicated by smaller icons or text. Press SHIFT once to activate, then press the desired function button.
- Special Functions (Colored Buttons): The red, green, yellow, and blue buttons typically correspond to specific functions within device menus or interactive services. Their function varies by device.
Maintenance
Cleaning
To clean your remote, gently wipe the surface with a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the remote's finish or internal components.
Battery Replacement
When the remote's performance degrades or the indicator light no longer illuminates, it is time to replace the batteries. Follow the battery installation steps outlined in the Setup section. Always replace all four AAA batteries at the same time with new ones.
Troubleshooting
If you encounter issues with your Monster Universal Learning Remote, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote not responding. | Dead batteries; remote out of range; IR sensor blocked; incorrect device selected. | Replace batteries; ensure remote is within 10 meters of device; clear line of sight to device's IR sensor; press correct device button (TV, DVD, etc.). |
| Learning function not working. | Original remote batteries low; remotes not aligned; interference; incorrect learning procedure. | Ensure original remote has fresh batteries; align IR emitters precisely (1-2 inches apart); minimize ambient light; re-attempt learning procedure carefully. |
| Some buttons don't work after programming. | Button not learned correctly; device-specific function. | Re-learn the specific button; some functions may not be supported by all devices or require specific device modes. |
| Backlight not illuminating. | Low batteries; feature disabled (not applicable for this model). | Replace batteries. Backlight should activate automatically with button press. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | Evolution 50 (121713) |
| Type | Universal Learning Remote |
| Connectivity Technology | Infrared (IR) |
| Compatible Devices | Television (and other AV components via learning/built-in codes) |
| Max Supported Devices | 1 (controls one device at a time, but can learn functions from multiple) |
| Battery Type | 4 x AAA Batteries |
| Maximum Range | 10 meters (33 feet) |
| Special Features | Learning Function, Built-in Codes, Backlit Buttons, Ergonomic Design |
| Item Dimensions (L x W x H) | 28.7 x 18.03 x 6.86 cm (approximate parcel dimensions) |
| Item Weight | 544.31 g (approximate parcel weight) |
Warranty and Support
For specific warranty information regarding your Monster Universal Learning Remote, please refer to the documentation included with your purchase or visit the official Monster website. Warranty terms and conditions may vary by region and retailer.
Should you require technical assistance or have questions not covered in this manual, please visit the Monster Brand Store or the manufacturer's official support website for contact information and additional resources.
